“This site contains affiliate links for which OEMDTC may be compensated” |
SSM 47306 – 2015-2017 Mustang – Inoperative Park Aid Camera, Luggage Compartment Lamp, DeckLid Release And/Or Poor Satellite Radio Reception
Some 2015-2017 Mustang vehicles may experience an inoperative Rear Parking Aid Camera, luggage compartment lamp, deck lid release and/or poor satellite radio reception.
Check the 14A005 wire harness at the right deck lid hinge for damage between the package tray harness retaining clip and the deck lid harness retainer clip.
Repair the harness following repair guidelines from section 5-1 of the wiring diagram.
If equipped with deck lid mounted satellite antenna, make sure the shielding is wrapped on the antenna wires securely after any repair.
Secure the harness ensuring it rolls downward into the trunk area when closing the deck lid and does not become trapped between the deck lid and the deck lid opening flange.
This concern may be accompanied by Diagnostic Trouble Codes (DTCs) B115E, C1001, and B1A89.
APPLICABLE VEHICLES
2015 – 2017 CAR: ZG S550N MUSTANG
- Multi colors in separate compartments, classify easily.
- Whenever you need to organize different wires, this is a good choice.
- 1/24"(80pcs),1/16"(80pcs),1/12"(100pcs),3/64"(30pcs),1/8"(60pcs),9/64"(30pcs),5/32"(70pcs),1/5"(30pcs),15/64"(20pcs),5/16"(20pcs),25/64"(60pcs)
- Ratio: 2:1 Operating Temperature: -55°C to + 125°C
- All packed in a plastic case for easy access and carry.
- 【3:1 SHRINK RATIO & FAST CONTRACTION SPEED】Shrinks to 1/3 of its original diameter and seals extremely tightly, solving the problem of many 2:1 shrink tubes that don't shrink enough and therefore don't seal tightly enough. Shrink temperature: 80 to 125°C. Provides a professional connection within seconds.
- 【INCLUDES ADHESIVE COATING】When the heat shrink tubing is heated, it automatically releases adhesive and seals the connection extremely reliably. This creates a waterproof and durable insulation with a satisfaction guarantee.
- 【DUAL WALL TUBING】The outer wall of the shrink tube provides extremely high abrasion resistance. The inner wall creates a consistently waterproof seal and excellent strain relief. Our solder connectors will also impress you!
- 【7 SIZES】We offer 7 of the most commonly used shrink tube diameters in the world, ranging from 3/32" to 3/4". All of our shrink tubes are pre-cut to 1.75 inches.
- 【VERSATILE APPLICATIONS】The waterproof Eventronic shrink tubing can be used in marine and automotive wiring, model building, and DIY electrical wiring projects. The application areas are very diverse, such as electrical insulation/environmental sealing to protect against moisture, fuel and chemicals/protection of surfaces against abrasion, peeling and denting.
- 3:1 SHRINK RATIO - Wirefy heat shrink tubing recovers to 1/3 of its original diameter, and makes a tight seal. Eliminates the problem of 2:1 tubing not shrinking tight enough.
- GLUE INSIDE - When heat is applied, adhesive comes out and seals the connection, creating waterproof and long-lasting insulation.
- VARIETY OF SIZES - We have included 7 most commonly used diameters ranging from 3/32" to 3/4". Shrink tubing is precut to 3.5 inches.
- EASY TO USE - Simply slide the heat shrink tube over your connection point and apply heat. Professional connections made in seconds.
- DUAL WALL TUBING - Outer wall of the heat-shrink tubing provides abrasion resistance. Inner wall creates waterproof seal and strain relief.
- 900 PCS WIRE HEAT SHRINK TUBING KIT LINED: 2:1 Industrial heat-shrink tubing for wires include: 1/24 (1.0mm) 200 pcs, 1/16 (1.5mm) 200 pcs, 1/12 (2.0mm) 100 pcs, 1/10 (2.5mm) 80 pcs, 1/8 (3.0mm) 60 pcs, 1/7 (3.5mm) 50 pcs, 1/6 (4mm) 50 pcs, 1/5 (5mm) 40 pcs, 1/4 (6mm) 30 pcs, 2/7 (7mm) 30 pcs, 2/5 (10mm) 30 pcs, 1/2 (13mm) 30 pcs, length: 1.77 inch(45 mm), total 900 pcs, 12 Sizes, 6 Colors. Our colored marine heat shrink tubing satisfied for your different need.
- PREMIUM MATERIAL: Our color industrial heat-shrink tubing for wires made of polyolefin, shrinkage ratio: 2:1, and makes a tight seal. Our colored wire shrink wrap tubing has good electrical insulation, corrosion resistance and high temperature resistance.
- EASY TO USE AND STORE: 12 Sizes of premium marine grade heat shrink wrap for you to choose, all packed in a plastic box for easy store and carry. Simply slide heat shrink tubing be over your connection point and apply heat, professional connections made in seconds, waterproof and long-lasting insulation.
- WIDELY USED: Our color marine grade heat shrink wrap suitable for wire connection, rust prevention and corrosion protection of solder joints, cable joints, protection and insulation processing of wire end, wiring harness. Our large electrical waterproof heat shrink tape also works well for protecting headphones and phone cables.
- SATISFIED SERVICE: We are committed to providing every customer premium large electrical waterproof heat shrink tape and satisfied service. If there are any problems with our wire heat shrink tubing kit lined, contact us, we will give you a satisfactory answer.
- 【INCLUDES ADHESIVE COATING】: When heat is applied, adhesive comes out and seals the connection, creating waterproof and long-lasting insulation. This creates a waterproof and durable insulation with a satisfaction guarantee.
- 【DUAL WALL TUBING】: Outer wall provides abrasion resistance. Inner wall creates waterproof seal and strain relief. Our solder connectors will also impress you!
- 【3:1 SHRINK RATIO & FAST CONTRACTION SPEED】: Recovers to 1/3 of its original diameter, and makes a tight seal. Eliminates the problem of 2:1 tubing not shrinking tight enough. Shrink temperature: 80 to 125°C. Provides a professional connection within seconds.
- 【VARIETY OF SIZES】: We offer larger diameter heat shrink tubing ranging from 1/8" to 1". Shrink tubing is precut to 1.75 inches.
- 【FUNCTIONAL WIRE SHRINK WRAP TUBING】: Covers all gauges of heat shrink wires you'll need in RC hobbies and many other applications. Heat shrink tubing assortment is mainly used in wire connection, rust prevention and corrosion protection of solder joints, protection and insulation processing of wire end, wiring harness and electronic components. Also works well for protecting headphones and phone cables.
- Safe and Environmental Friendly Material Shrink Wrap: Conform to UL224, CSA C22.2, RoHS standard. Electrical heat shrink tubing material composition does not contain heavy metal and other environmentally hazardous substances. No slowly or long-term virulence. No need to worry about your health when using innhom heat shrink wrap.
- Premium Quality Heat Shrink Tubing Set: Excellent flame retardant (UL 224, VW-1) and insulation performance. Soft and flexible wire shrink wrap, low shrinkage temperature-minimum shrinkage temp: +158℉(+70°C), fast shrinkage, easy and convenient to use with a heat gun.
- Effective and Long Lasting Protection: innhom heat tube shrink has the advantages of good tightness, acid and alkali resistance, durable and anti-aging. Shrink wrap wire tensile strength: 14 Mpa. Dielectric strength: >20kV/mm. Elongation at break: >400%. Volume resistivity: >1.0× 10^14Ω.cm. Cold-resistant bending -22℉(-30 °C) × 1h without cracking. Use innhom heat shrink tubes instead of ugly and short-lived electric tape.
- Functional Wire Shrink Wrap Tubing: Covers all gauges of heat shrink wires you'll need in RC hobbies and many other applications. innhom heat shrink tubing assortment is mainly used in wire connection, rust prevention and corrosion protection of solder joints, protection and insulation processing of wire end, wiring harness and electronic components. Also works well for protecting headphones and phone cables.
- What You Get: Total 650pcs ratio 2:1 Black heat shrink tubes, 8 sizes. Supplied internal diameter, 150-1/24", 120-1/12", 100-1/8", 90-1/6", 80-1/5", 50-1/4", 30-5/16", 30-2/5". Single length 1 4/7". All packed in a plastic case for easy storage. innhom wire shrink tubing can ensure your pleasant shopping experience.
- Heat Shrink Tubing 2:1, Eventronic Electrical Wire Cable Wrap Assortment Electric Insulation Heat Shrink Tube Kit with Box
- [ Industrial Strength ] : Our heat shrink tubing ensures secure wire insulation in any industrial setting, providing reliable protection against damage and environmental exposure.
- [ Chemical Resistance ] : The heat shrink tubing kit's durable material can withstand most chemicals, offering excellent resistance to corrosive substances.
- [ Dual Wall Tubing] : Outer wall provides abrasion resistance, Inner wall offers a superior level of strain relief and additional protection against mechanical and environmental damage.
- [ Good Tightness with Glue Lined ] : Our heat shrink tubing offers a tight fit with the added benefit of a glue-lined exterior that permanently seals against moisture and dust.
- [ Fast & Easy Use ] : With a 3:1 shrink ratio and dual wall construction, our heat shrink tubing is easy to use and provides excellent electrical insulation, corrosion resistance, and high temperature resistance.
- 400 PCS WIRE HEAT SHRINK TUBING KIT WITH ADHESIVE LINED: 3:1 Industrial heat-shrink tubing for wires include: 3/32 (4.5 mm) 150 pcs, 1/8 (6 mm) 110 pcs, 3/16 (8.5 mm) 60 pcs, 1/4 (10 mm) 32 pcs, 3/8 (15 mm) 24 pcs, 1/2 (22 mm) 12 pcs, 3/4 (33 mm) 12 pcs, length: 1.77 inch(45 mm), total 400 pcs. Our marine heat shrink tubing satisfied for your different need.
- PREMIUM MATERIAL: Our black industrial heat-shrink tubing for wires made of polyolefin, shrinkage ratio: 3:1, and makes a tight seal. Our wire shrink wrap tubing has good electrical insulation, corrosion resistance and high temperature resistance.
- EASY TO USE AND STORE: 7 Sizes of premium marine grade heat shrink wrap for you to choose, all packed in a plastic box for easy store and carry. Simply slide heat shrink tubing be over your connection point and apply heat, professional connections made in seconds, waterproof and long-lasting insulation.
- WIDELY USED: Our marine grade heat shrink wrap suitable for wire connection, rust prevention and corrosion protection of solder joints, cable joints, protection and insulation processing of wire end, wiring harness. Our large electrical waterproof heat shrink tape also works well for protecting headphones and phone cables.
- SATISFIED SERVICE: We are committed to providing every customer premium large electrical waterproof heat shrink tape and satisfied service. If there are any problems with our wire heat shrink tubing kit with adhesive lined, contact us, we will give you a satisfactory answer.
- 3:1 Shrink Ratio: Shrink tubing will become one-third of its original size when heat is applied, more resistant to stretching and vibration than regular heat shrink, and has more tensile strength
- Useful Sizes: Heat shrink tubing kit is between 3.2mm and 19.1mm in diameter, is frequently used size, no useless size
- Dual Wall Shrink Tube: Reliable and long-protected adhesive-lined heat shrink tubing consisting of two layers, waterproof and sealed
- Flame-retardant and Low Smoke: Electrical shrink wrap tubing is made of polyolefin and an inner layer consists of a meltable adhesive, that withstands temperatures of -67 to 257 degrees Fahrenheit (-55 to 125 degrees Celsius)
- Widely used: Heat shrink tubing is mainly used for electrical insulation of wires, solder joints, connectors, and terminals, heat shrink can also be used to prevent damage, strain relief, bundling wires, etc.
Last update on 2024-02-19 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.