| “This site contains affiliate links for which OEMDTC may be compensated” |
2015-2016 Mustang Built On Or Before 12/14/2015 Equipped With Rain Sensing Wipers – Momentary Headlamp Outage In Autolamp Mode
Some 2015 and 2016 Mustang vehicles built on or before 12/14/2015 equipped with Rain Sensing Wipers with the headlamp switch in the Auto position and the headlamps not active, if exposed to particularly unique stray light sources may turn the headlamps on, then after driving for 25 km may have the headlamps temporarily shut off.
The headlamps will come back on automatically after a short time or when the customer turns the main lighting switch to “On”.
Reprogram the BCM module to the latest calibration using IDS release 99.01 or higher.
Calibration files may also be obtained at www.motorcraftservice.com.
Service Information & Reprogramming
Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.
Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:
- Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
- Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)
In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.
J2534 Device 
using Ford Module Programming (FMP) can Reprogram and Configure most Modules.
Latest Calibration Information
Module Build Data (As-Built)
Use VIN to obtain As-Built data
