| “This site contains affiliate links for which OEMDTC may be compensated” |
2015 And 2016 Mustang – Body Contol Module Programming Fails.
When replacing the BCM (Body Control Module) on 2015 and 2016 Mustang using IDS versions prior to 97.05 may encounter an error indicating PMI (Programmable Module Installation) has failed.
This may also result in a ‘Red/Failed programming’session on the IDS.
In order to correct this concern ensure that IDS version 97.05 or later is used, make sure you are connected to the internet to receive the latest IDS routine for BCM programming.
Service Information & Reprogramming
Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.
Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:
- Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
- Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)
In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.
J2534 Device 
using Ford Module Programming (FMP) can Reprogram and Configure most Modules.
Latest Calibration Information
Module Build Data (As-Built)
Use VIN to obtain As-Built data
