| “This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10241601
Manufacturer Communication Number: SSM 51881
Summary
2020-2023 Explorer non-hybrid vehicles and equipped with a 3.0L EcoBoost or 3.3L Duratec engine and 2020-2023 Aviator non-hybrid vehicles equipped with a 3.0L EcoBoost engine built on or before 01-Jan-2023 may exhibit an exhaust rattle requiring replacement of the left or right exhaust flexible pipe (5G203). The updated part locates the flexible joint portion of the pipe closer toward the catalytic converter than the originally equipped part. This is due to a design change with these replacement components which will not cause any functional issues with the vehicle.
8 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
| FORD | EXPLORER | 2020-2023 |
| LINCOLN | AVIATOR | 2020-2023 |
1 Associated Document
Manufacturer Communications
SSM 51881 2020-2023 Explorer/Aviator – Non-Hybrid Vehicles With 3.0L EcoBoost and 3.3L Duratec Engines – Exhaust Rattle Updated Part – Built On Or Before 01-Jan-2023
https://www.nhtsa.gov/recalls?nhtsaId=10241601
Loading...
Reload document 
Open in new tab
SaleBestseller No. 1
Walker 55661 Exhaust Y Pipe for Ford Explorer
- COMPATIBILITY – Fits 2011-2011 Ford Explorer; 2012-2012 Ford Explorer; 2013-2013 Ford Explorer; 2014-2014 Ford Explorer; 2015-2015 Ford Explorer; 2016-2016 Ford Explorer; 2017-2017 Ford Explorer; 2018-2018 Ford Explorer; 2019-2019 Ford Explorer
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- INHIBITS CORROSION -- Durable aluminized-steel construction to inhibit corrosion and promote performance
- EASY TO INSTALL -- Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE -- Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
Bestseller No. 2
Walker Quiet-Flow SS 56233 Direct Fit Exhaust Muffler Assembly 2.25" Inlet (ID) 2.25" Outlet (OD) for Ford Escape
- COMPATIBILITY – Fits 2009-2009 Ford Escape; 2010-2010 Ford Escape; 2011-2011 Ford Escape; 2012-2012 Ford Escape; 2009-2009 Mercury Mariner; 2010-2010 Mercury Mariner; 2011-2011 Mercury Mariner; 2009-2009 Mazda Tribute; 2010-2010 Mazda Tribute; 2011-2011 M
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- STAINLESS STEEL INHIBITS CORROSION -- The only broad-market muffler with 100% stainless-steel construction that delivers longer life versus aluminized mufflers while an internal drainage system reduces moisture collection
- EASY TO INSTALL -- Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation and doesn't require specialized fabrication and/or welding
- BUILT TO LAST -- Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
Bestseller No. 3
![DNA MOTORING CBE-F150-97-4654L Stainless Steel Muffler CatBack Exhaust System [Compatible with 10-14 Ford F-150 Extended Cab 5.7' Bed]](https://m.media-amazon.com/images/I/41m2jM2f0JL._SL160_.jpg)
DNA MOTORING CBE-F150-97-4654L Stainless Steel Muffler CatBack Exhaust System [Compatible with 10-14 Ford F-150 Extended Cab 5.7' Bed]
- 【FITMENT】Compatible with 10-14 Ford F-150 Extended Cab 5.7' Bed
- 【Quality Construction】Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability. TIG welded CNC machine flange for resistance against pressure and corrosion.
- 【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency.
- 【Muffler & Diameter】Inlet: 2.35" (ID) / Outlet: 2.35" (ID) / Tip Diameter: 4" (OD) / Slanted double walled rolled tip
- 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound.
Bestseller No. 4
BRExhaust Direct-Fit Replacement Exhaust System 106-0278: For 1987-1995 Ford F-150
- Fits, sounds and performs just like OEM - bolts on for an easy DIY installation, with no cutting or welding required. Longer exhaust pipes are replaced by multiple smaller sections, so they can be installed without having to remove axles or suspension.
- Exhaust kits are manufactured from corrosion-resistant aluminized steel and include all the hardware, clamps and gaskets required for installation
- Two year, unlimited mileage warranty!
- Leaves all emissions equipment intact, making it 50-state emissions compliant
- Fits 1987-1995 Ford F150 Fleetside with the 4.9L or 5.0L engine, 139" or 155" wheelbase and single catalytic converter
SaleBestseller No. 5
Walker SoundFX 18887 Direct Fit Exhaust Muffler 3" Inlet (ID) 3" Outlet (ID) for Ford F-250 Super Duty
- COMPATIBILITY – Fits 1999-1999 Ford F-250 Super Duty; 2000-2000 Ford F-250 Super Duty; 2001-2001 Ford F-250 Super Duty; 2002-2002 Ford F-250 Super Duty; 2003-2003 Ford F-250 Super Duty; 2004-2004 Ford F-250 Super Duty; 1999-1999 Ford F-350 Super Duty; 200
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- INHIBITS CORROSION -- Aluminized-steel construction and internal drainage system helps inhibit corrosion
- BUILT TO LAST -- Internal partitions and mechanically joined tubes allow expansion and contraction during temperature changes to minimize distortion while spun-locked heads and OE-style spot welds provide stability and longer service life
- EASY TO INSTALL -- Direct-fit bolt-on replacement solution with OE-style hangers, brackets and pipe routings for easy installation that doesn't require specialized fabrication and/or welding
Bestseller No. 6
Exhaust Manifold Pair Set of 2 for 68-76 Ford Truck Pickup F100 F150 F250 F350
- Direct Fit, OE Replacement Exhaust Manifold
- Vehicle Specific: Check fitment information in the listing for compatibility
- Aftermarket Reference Number(s): 674240,674241,EXH00283,EXH00284
SaleBestseller No. 7
Walker 55693 Exhaust Y Pipe for Ford Edge
- COMPATIBILITY – Fits 2011-2011 Ford Edge; 2012-2012 Ford Edge; 2013-2013 Ford Edge; 2014-2014 Ford Edge
- GET THE RIGHT PART -- Before purchasing, research to ensure that the part will fit your vehicle; enter all vehicle information (year, make, model, engine and trim) for compatibility and check qualifier notes
- INHIBITS CORROSION -- Durable aluminized-steel construction to inhibit corrosion and promote performance
- EASY TO INSTALL -- Manufactured with precision bends and OE-style routings, hangers and connectors for easy installation (where applicable)
- OE-STYLE PERFORMANCE -- Direct-fit design is fixture checked to ensure a precise fit that performs like original equipment
Bestseller No. 8
2PCs of Left & Right Side LH RH Exhaust Manifold & Gasket Kit Compatible with 2004-2014 Ford Expedition F-150 Lincoln Mark LT Navigator Replace for 674-695 7L1Z9431A 674-694 3L3Z9431CA
- Compatible with 2005-2014 Ford Expedition Compatible with 2004-2010 Ford F-150 Compatible with 2006-2010 Lincoln Mark LT Compatible with 2005-2014 Lincoln Navigator
- Replacement OEM Number: 674-695, 7L1Z9431A, 674-694, 3L3Z9431CA
- Part Name: Exhaust Manifolds & Headers Placement on Vehicle: Left, Right, Front Material: Stainless Steel Color: Natural Gasket or Seal Included: Yes Heat Shield Included: No Mounting Hardware Included: Yes Port Shape: Irregular
- Note: Please check the appearance and part number of the product before placing the order to confirm that it is suitable for your car, thank you.
- Support One Year Warranty.
Bestseller No. 9
![DNA MOTORING CBE-FM96GTV8 Stainless Steel Cat Back Exhaust System [Compatible with 96-04 Ford Mustang GT V8]](https://m.media-amazon.com/images/I/41Klvt0DYUL._SL160_.jpg)
DNA MOTORING CBE-FM96GTV8 Stainless Steel Cat Back Exhaust System [Compatible with 96-04 Ford Mustang GT V8]
- 【FITMENT】Compatible with 96-04 Ford Mustang GT V8
- 【Quality Construction】Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability
- 【Enhance Performence】Dyno proven to instantly increases 15 - 25 horsepower / low end torque. Aggressive deep and smooth tone while ensures smooth exhaust gas flow, increase engine output and efficiency.
- 【Long Term Durability】TIG welded CNC machine flange for resistance against pressure and corrosion.
- 【Design】The larger pipes, low-restriction mufflers, and tuned resonators of a well-designed performance exhaust system can make stunned effect on your vehicle: lower auto exhaust back pressure and a much better sound.
Last update on 2024-07-14 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
