| “This site contains affiliate links for which OEMDTC may be compensated” |
2016 Transit Connect, Equipped With 2.5L Engine, PATS Security Access Fails Due To Low Voltage Detected
Some 2016 Transit Connect vehicles equipped with the 2.5L engine may have difficulty gaining security access to the PATS menu, using IDS.
Security access may fail due to “low battery voltage detected”. If the actual battery state of charge is above 12 volts, disregard this message and update your IDS to 97.02.
Rerun the application to gain security access.
Service Information & Reprogramming
Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.
Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:
- Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
- Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)
In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.
J2534 Device 
using Ford Module Programming (FMP) can Reprogram and Configure most Modules.
Latest Calibration Information
Module Build Data (As-Built)
Use VIN to obtain As-Built data
