| “This site contains affiliate links for which OEMDTC may be compensated” |
2014-2015 Fiesta With Automatic Transmission, Engine Oil Minder – Oil Change Now Indicator Message Inoperative – Built On Or Before 06/01/2015 – Update Available
2014-2015 Fiesta with automatic transmission vehicles built on or before 6/1/2015 can exhibit an oil change now indicator message that is inoperative.
Ensure that FSA 15B22 has been performed.
This calibration includes an update to the PCM which will resolve the concern.
For vehicles equipped with a 1.0 GTDI the ICP will need to be reprogrammed also.
Service Information & Reprogramming
Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.
Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:
- Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
- Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)
In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.
J2534 Device 
using Ford Module Programming (FMP) can Reprogram and Configure most Modules.
Latest Calibration Information
Module Build Data (As-Built)
Use VIN to obtain As-Built data
