| “This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10233740
Manufacturer Communication Number: SSM 51452
Summary
Some 2021-2023 F-150, 2021-2023 F-Super Duty, 2021-2023 Ranger customers may have concerns including, but not limited to: no power to the distribution box, rear camera inoperative, rear park assist inoperative, box lights inoperative, power up/down tailgate inoperative, unable to open tailgate by tailgate switch, and no tailgate ajar message when the tailgate is ajar. These concerns may be caused by faulty connections between the pickup bed, tailgate, rear lamp assemblies, or bumper where connectors are disconnected, damaged, or coated with bedliner. Prior to performing any warranty diagnosis or repairs, verify if the vehicle had an aftermarket spray-in-bedliner. Any repairs resulting from aftermarket products/installation, including but not limited to a spray-in bedliner, are not covered under warranty.
18 Affected Products
Vehicles
| MAKE | MODEL | YEAR |
FORD | F-150 | 2021-2023 |
| FORD | F-250 SD | 2021-2023 |
| FORD | F-350 SD | 2021-2023 |
| FORD | F-450 SD | 2021-2023 |
| FORD | F-550 SD | 2021-2023 |
| FORD | RANGER | 2021-2023 |
1 Associated Document
Manufacturer Communications
SSM 51452
2021-2023 F-150, 2021-2023 F-Super Duty, 2021-2023 Ranger – Bed Feature And/Or Tailgate Malfunction After Spray-In-Bedliner Installation
Loading...
Reload document 
Open in new tab
NHTSA ID Number: 10228884
Manufacturer Communication Number: SSM 51279
Summary
Some 2021-2023 F-150, 2021-2022 F-Super Duty, 2021-2023 Ranger customers may have concerns including, but not limited to: no power to the distribution box, rear camera inoperative, rear park assist inoperative, box lights inoperative, power up/down tailgate inoperative, unable to open tailgate by tailgate switch, and no tailgate ajar message when the tailgate is ajar. These concerns may be caused by faulty connections between the pickup bed, tailgate, rear lamp assemblies, or bumper where connectors are disconnected, damaged, or coated with bedliner. Prior to performing any warranty diagnosis or repairs, verify if the vehicle had an aftermarket spray-in-bedliner. Any repairs resulting from aftermarket products/installation, including but not limited to a spray-in bedliner, are not covered under warranty.
1 Associated Document
Manufacturer Communications
SSM 51279
2021-2023 F-150, 2021-2022 F-Super Duty, 2021-2023 Ranger – Bed Feature And/Or Tailgate Malfunction After Spray-In-Bedliner Installation
Loading...
NHTSA ID Number: 10222070
Manufacturer Communication Number: SSM 51092
Summary
Some 2021-2022 F150 customers may have concerns including, but not limited to: no power to the distribution box, rear camera inoperative, rear park assist inoperative, box lights inoperative, power up/down tailgate inoperative, unable to open tailgate by tailgate switch, and no tailgate AJAR message when the tailgate is AJAR. These concerns may be caused by faulty connections between the pickup bed, tailgate, rear lamp assemblies, or bumper where connectors are disconnected, damaged, or coated with bedliner. Prior to performing any warranty diagnosis or repairs, verify if the vehicle had an aftermarket spray-in-bedliner. Any repairs resulting from aftermarket products/installation, including but not limited to a spray-in bedliner, are not covered under warranty.
1 Associated Document
Manufacturer Communications
SSM 51092
2021-2022 F-150 – Bed Feature And/Or Tailgate Malfunction After Spray-In-Bedliner Installation
MC-10222070-0001.pdf 115.108KB
Loading...
- TOUGH & LONG-LASTING: This 2K urethane coating resists stains, scratches, rust, and extreme temperatures while staying flexible to reduce road noise and vibration. Its UV-resistant tintable formula won’t fade, ensuring a durable, professional finish.
- KIT INCLUDES: 4x 750ml bottles of black bed liner base, 1x 1 litre of hardener, 1x spray gun (requires 8 CFM @ 50-60 PSI), and instructions. Covers a 6ft to 8ft Truck Bed.
- EASY TO APPLY: Simply fill, shake, and shoot with the included spray gun, or roll/brush for custom textures. Bonds to OEM paint and self-etching primer for superior adhesion. Rapid-drying formula allows for multiple coats in just an hour.
- VERSATILE PROTECTION: Creates a waterproof, corrosion-resistant, and impact-proof barrier for truck beds, undercoatings, trailers, boats, and more. Designed to withstand heavy-duty use while preventing rust, chemical damage, and wear.
- RAPTOR TOUGH: Raptor are World leaders in automotive refinishing with a wide range of comprehensive products specializing in driving surface perfection including fillers, coatings, aerosols, adhesives, & truck-bed liners.
- Herculiner "Original" Truck Bed Liner Aerosol protects against scratches, rust & fading for use as a touch-up or cut-in for bed liners, or for coating trim.
- 15oz can with about 6-7fsq. ft of coverage!
- Versatile & Dependable: Protects against scratches, rust & fading
- Also great for protecting exterior trim, bumpers, undercoating and wheel well applications
- Ideal for touch-ups and cut-ins for bed liner applications
- Ideal for use on truck beds, trailer floors, fenders and other metal surfaces
- Stops Rust formula provides long lasting protection with any-angle spray comfort tip that reduces finger fatigue and makes it easy to reach hard to paint places
- Dries to the touch in 1 hour and covers up to 20 sq. ft. per can
- Offers superior durability and can be used on bare or primed metal truck beds
- Textured non-skid finish is resistant to scratches and the outdoor elements
- TOUGH & LONG-LASTING: This 2K urethane coating resists stains, scratches, rust, and extreme temperatures while staying flexible to reduce road noise and vibration. Its UV-resistant tintable formula won’t fade, ensuring a durable, professional finish.
- KIT INCLUDES: 4x 750ml bottles of tintable bed liner base, 1x 1 litre of hardener, 1x spray gun (requires 8 CFM @ 50-60 PSI), and instructions. Covers a 6ft to 8ft Truck Bed.
- EASY TO APPLY: Simply fill, shake, and shoot with the included spray gun, or roll/brush for custom textures. Bonds to OEM paint and self-etching primer for superior adhesion. Rapid-drying formula allows for multiple coats in just an hour.
- VERSATILE PROTECTION: Creates a waterproof, corrosion-resistant, and impact-proof barrier for truck beds, undercoatings, trailers, boats, and more. Designed to withstand heavy-duty use while preventing rust, chemical damage, and wear.
- RAPTOR TOUGH: Raptor are World leaders in automotive refinishing with a wide range of comprehensive products specializing in driving surface perfection including fillers, coatings, aerosols, adhesives, & truck-bed liners.
- Herculiner Professional Grade Bed Liner Kit is a two-component textured bed liner coating system that outperforms DIY and Professional installed liners in durability. The product can be applied by spraying on the material with the included spray gun or rolled on using the included foam rollers.
- Herculiner Professional Bed Liner Kit can cover an 8ft truck bed with only one coat! Once cure the product has a textured skid resistant finish!
- Herculiner Professional Bed Liner Kit is dry to the touch in 4 hours, ready for light use in 12 hours and cures fully in 24 hours (slower in cold temperatures).
- Herculiner Professional Bed Liner Kit includes the Spray Gun! It also contains two foam rollers for those who would like to roll the product on instead!
- Herculiner: Takes on Anything!
- TOUGH & LONG-LASTING: This 2K urethane coating resists stains, scratches, rust, and extreme temperatures while staying flexible to reduce road noise and vibration. Its UV-resistant tintable formula won’t fade, ensuring a durable, professional finish.
- KIT INCLUDES: 8x 750ml bottles of black bed liner base, 2x 1 litre of hardener, 1x spray gun (requires 8 CFM @ 50-60 PSI), and instructions.
- EASY TO APPLY: Simply fill, shake, and shoot with the included spray gun, or roll/brush for custom textures. Bonds to OEM paint and self-etching primer for superior adhesion. Rapid-drying formula allows for multiple coats in just an hour.
- VERSATILE PROTECTION: Creates a waterproof, corrosion-resistant, and impact-proof barrier for truck beds, undercoatings, trailers, boats, and more. Designed to withstand heavy-duty use while preventing rust, chemical damage, and wear.
- RAPTOR TOUGH: Raptor are World leaders in automotive refinishing with a wide range of comprehensive products specializing in driving surface perfection including fillers, coatings, aerosols, adhesives, & truck-bed liners.
- Professional Custom Coat Spray on Truck Bed Liner 2 Gallon Kit. Kit Includes: 8 - 24 fl. oz. Cans of Black Truck Bed Liner Base, 8 - 8 fl. oz. Cans Custom Coat Standard Hardener, and 1 Custom Coat Applicator Spray Gun with Regulator. Estimated coverage is 110 to 130 square feet @ 10 mils wet film thickness.
- Custom Coat Truck Bed Liner is a premium durable long lasting textured protective coating that can tolerate extreme climatic temperature conditions. It is heat, UV resistant and waterproof, so it protects coated surfaces from rust. Use it to help dampen sounds and vibrations.
- Custom Coat was developed to provide a great looking durable yet flexible textured surface and is a heavy duty 2 part urethane coating that is easy to apply. It provides the ultimate surface protection for almost any application. Unlike other protective and bed liner coatings Custom Coat is a flexible material that will resist chipping, while providing impact protection and abrasion resistance. These features and benefits make it perfect for its most popular application as a truck bed liner.
- Custom Coat is a very versatile product that can be used for endless amount of applications. Use it on truck beds, entire vehicle exteriors, chassis, bumpers, commercial vehicles, equipment and trailers. It's also great for home uses as non-skid coating for floors including garage floors, concrete, wood, steps, walkways, wood decks, docks, bath tubs, basement floors, walls, tool boxes and engine compartments.
- Easily achieve professional results with our DIY Custom Coat Kit Packages. Kits are available in various sizes from 1 quart to 2 gallon. Kits are also available with either a Spray Applicator Gun or a Paint Roller Application Set. Custom Coat also offers Urethane Tint Concentrate in over 50 colors, so you can choose either a single color or use different colors to create your own multi-colored custom look or use the colors that will make a great camouflage pattern.
- Creates a durable bed liner with a non-skid finish on bare metal or painted metal surfaces that protects against rust and abrasion
- Truck bed liner spray in a pro grade turbo formula offers 4X faster coverage with maximum impact and corrosion resistance
- Create a custom truck bed mat quickly - dries to the touch in 1 hour and covers up to 15 sq. ft. per can
- Multi-purpose truck bed paint coating features high output tip for large projects and faster application in tight, curved areas
- Spray on aerosol works on painted or bare metal to create a textured, matte black finish that will not fade or chip
- Easy to use: Add hardener - Shake - Spray
- Custom Coat Bedliner Spray Gun features adjustable nozzle and includes Regulator and Gauge
- Abrasion and Stain Resistant
- Protects against rust corrosion salt damp & extreme temperatures
- Waterproof flexible helps deaden sound & vibrations
- Creates an attractive liner that prevents damage caused by scratches, rust and weather with a durable, protective coating
- Truck bed liner in a fast dry, water-based formula forms to the contours of the truck bed and protects with ultimate rust and abrasion resistance
- Dries to touch in 1-2 hours and covers up to 40 sq. ft. per quart
- Truck bed paint is easy to apply by spray, brush or roller to recoat or restore any metal truck bed
- Create a custom truck bed mat on painted or bare metal with a non-skid, textured finish
Last update on 2025-05-08 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.