| “This site contains affiliate links for which OEMDTC may be compensated” |
| TSB 14-0003 | IPC INFORMATION DISPLAY DEFAULTING TO ROUND TACHOMETER – BUILT ON OR BETWEEN 8/20/2013 AND 11/22/2013 |
| FORD: | 2014 Fusion |
ISSUE:
Some 2014 Fusion vehicles built on or between 8/20/2013 and 11/22/2013, equipped with a 6F35 automatic transmission and MyFord Touch may exhibit the Instrument Panel Cluster (IPC) information display defaulting to the round tachometer each time the transmission range selector is placed in drive.
ACTION:
Reprogram the IPC module to the latest calibration using IDS or Ford J2534 release 87.05 and higher.
Calibration files may also be obtained at www.motorcraft.com.
| OPERATION | DESCRIPTION | TIME |
|---|---|---|
| 140003A | 2014 Fusion: Reprogram The IPC (Do Not Use With Any Other Labor Operations) | 0.3 Hr. |
WARRANTY STATUS
Eligible Under Provisions Of New Vehicle Limited Warranty Coverage.
Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.
DEALER CODING
| BASIC PART NO. | CONDITION CODE |
| 10849 | 42 |
Loading...
Reload document 
Open in new tab
Service Information & Reprogramming
Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.
Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:
- Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
- Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)
In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.
J2534 Device 
using Ford Module Programming (FMP) can Reprogram and Configure most Modules.
Latest Calibration Information
Module Build Data (As-Built)
Use VIN to obtain As-Built data
