| “This site contains affiliate links for which OEMDTC may be compensated” |
| TSB 14-0075 | 3.5L GTDI – MIL ILLUMINATED – DTCS P0113 AND/OR P0114 – AMBIENT TEMPERATURES BELOW -28 °C (-20 °F)- BUILT ON OR BEFORE 4/3/2013 |
FORD : | 2013 F-150 |
This article supersedes TSB 13-5-16 to update the Title and Issue Statement.
ISSUE:
Some 2013 F-150 vehicles equipped with the 3.5L Gasoline Turbocharged Direct Injection (GTDI) engine and built on or before 4/3/2013 may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble codes (DTCs) P0113, and/or P0114 in ambient temperatures below -28 °C (-20 °F).
ACTION:
Reprogram the powertrain control module to the latest calibration using IDS or Ford J2534 release 89.04 and higher. Calibration files may also be obtained at www.motorcraft.com.
NOTE: ADVISE THE CUSTOMER THAT THIS VEHICLE IS EQUIPPED WITH AN ADAPTIVE TRANSMISSION SHIFT STRATEGY WHICH ALLOWS THE VEHICLE’S COMPUTER TO LEARN THE TRANSMISSION’S UNIQUE PARAMETERS AND IMPROVE SHIFT QUALITY. WHEN THE ADAPTIVE STRATEGY IS RESET, THE COMPUTER WILL BEGIN A RE-LEARNING PROCESS. THIS RE-LEARNING PROCESS MAY RESULT IN FIRMER THAN NORMAL UPSHIFTS AND DOWNSHIFTS FOR SEVERAL DAYS.
| OPERATION | DESCRIPTION | TIME |
|---|---|---|
| 140075A | 2013 F-150 3.5L GTDI: Check DTCs And Reprogram The PCM (Do Not Use With Any Other Labor Operations) | 0.4 Hr. |
WARRANTY STATUS
Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage.
Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.
DEALER CODING
| BASIC PART NO. | CONDITION CODE |
| Recal | 04 |
Loading...
Reload document 
Open in new tab
Service Information & Reprogramming
Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.
Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:
- Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
- Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)
In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.
J2534 Device 
using Ford Module Programming (FMP) can Reprogram and Configure most Modules.
Latest Calibration Information
Module Build Data (As-Built)
Use VIN to obtain As-Built data
