MIL illuminated with DTC P054F – 2013-2014 Ford F-Super Duty

TSB 14-0138 6.7L DIESEL – MALFUNCTION INDICATOR LAMP (MIL) ILLUMINATED – DIAGNOSTIC TROUBLE CODE (DTC) P054F
FORD: 2013-2014 F-Super Duty

 

ISSUE:

Some 2013-2014 F-Super Duty vehicles equipped with a 6.7L engine may exhibit a MIL illuminated with DTC P054F idle control system – fuel quantity higher than expected.

This condition may be associated with the powertrain control module (PCM) software.

 

ACTION:

Reprogram the PCM to the latest calibration using IDS or Ford J2534 release 91.04 and higher. Calibration files may also be obtained at www.motorcraftservice.com.

NOTE   ADVISE THE CUSTOMER THAT THIS VEHICLE IS EQUIPPED WITH AN ADAPTIVE TRANSMISSION SHIFT STRATEGY WHICH ALLOWS THE VEHICLE’S COMPUTER TO LEARN THE TRANSMISSION’S UNIQUE PARAMETERS AND IMPROVE SHIFT QUALITY. WHEN THE ADAPTIVE STRATEGY IS RESET, THE COMPUTER WILL BEGIN A RE-LEARNING PROCESS. THIS RE-LEARNING PROCESS MAY RESULT IN FIRMER THAN NORMAL UPSHIFTS AND DOWNSHIFTS FOR SEVERAL DAYS.

 

OPERATION DESCRIPTION TIME
140138A 2013-2014 F-Super Duty 6.7L: Retrieve DTCs, Reprogram The PCM And Clear Codes (Do Not Use With Any Other Labor Operations) 0.7 Hr.

 

WARRANTY STATUS

Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage.
Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.

 

DEALER CODING

BASIC PART NO. CONDITION CODE
RECALEM 04

 

 

Download (PDF, 67KB)

 

 


 

Service Information & Reprogramming

Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.

Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:

  • Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
  • Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)

In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.

J2534 Device using Ford Module Programming (FMP) can Reprogram and Configure most Modules.

Latest Calibration Information

Module Build Data (As-Built)
Use VIN to obtain As-Built data

www.motorcraftservice.com

 

Leave A Comment

Your email address will not be published. Required fields are marked *

*

This site uses Akismet to reduce spam. Learn how your comment data is processed.