Separation of the Forward Attachment of the Lower Control Arm (LCA) – 2001-2004 Ford Escape

“This site contains affiliate links for which OEMDTC may be compensated”

NHTSA ID Number: 10205036

Manufacturer Communication Number: TSB160071

Summary

Safety recall 14S02 – Corrosion at forward attachment of lower control arm – requests for recall service action

 


2004 Ford Escape
2004 Ford Escape

 


FORD:
2001-2004 Escape

 

This article supersedes TSB 14-0163 to provide updated contact direction to the Special Service Support Center.

 

ISSUE

2001-2004 Escape vehicles Safety Recall 14S02 has been issued for vehicles that are operated in high corrosion areas for an extended period, where a corrosion-related separation of the forward attachment of the lower control arm (LCA) from the subframe may occur.

Separation of the LCA from the subframe may result in diminished vehicle directional control, increasing the risk of a crash.

 

ACTION

Follow the Service Procedure steps to correct the condition.

 

SERVICE PROCEDURE

  1. For 2001-2004 Escape vehicles that are not covered under Safety Recall 14S02 but exhibit corrosion at the forward attachment of the lower control arm, dealers can submit a Non-Involved Vehicle type contact to the Special Service Support Center (SSSC) from the PTS website to request recall service action. Dealers should provide pictures of the VIN tag, Odometer and an image of both front forward lower control arm to subframe attachment areas on the vehicle. Dealers located in U.S. Federalized Territories (America Samoa, Guam, Northern Mariana Islands, Puerto Rico and U.S. Virgin Islands) must contact expcso@ford.com to request recall service action.
  1. If approved, follow Safety Recall 14S02. Dealers are to install a reinforcement crossbrace on the subframe so that steering control can be maintained in the event of a separation of the forward attachment of the LCA. If the forward attachment of the LCA has already separated, provide the required information as indicated in Attachment III of Safety Recall 14S02: Technical information to request approval to replace the subframe.

 

OTHER APPLICABLE ARTICLES

14S02

NHTSA

14V165

 


4 Affected Products

Vehicle

MAKE MODEL YEAR
FORD ESCAPE 2001-2004

 


1 Associated Document

Manufacturer Communications

TSB 16-0071

https://www.nhtsa.gov/recalls?nhtsaId=10205036

MC-10205036-9999.pdf 95.654KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [93.41 KB]

 


NHTSA ID Number: 10183772

Manufacturer Communication Number: 16-0071

Summary

2001-2004 Escape vehicles Safety Recall 14S02 has been issued for vehicles that are operated in high corrosion areas for an extended period, where a corrosion-related separation of the forward attachment of the lower control arm (LCA) from the subframe may occur. Separation of the LCA from the subframe may result in diminished vehicle directional control, increasing the risk of a crash.

 

1 Associated Document

Manufacturer Communications

TSB 16-0071

https://www.nhtsa.gov/recalls?nhtsaId=10183772

MC-10183772-9999.pdf 95.654KB

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [93.41 KB]

 


 

Bestseller No. 1
CorrosionX Corrosion Technologies 90102 (16 oz aerosol) – Multi-Purpose Lubricant, Penetrant, Rust and Corrosion Preventative | Industrial Strength | Marine Grade | Cleans Lubricates Protects
  • Flagship product of a line of marine, industrial, aviation, automotive and other products
  • Anti-Corrosion Aerosol and Lubricant
  • Marine, industrial, aviation, automotive, concrete, asphalt and household maintenance, protection
  • Quality craftsmanship and materials make this product a must have for any fisherman
  • ZERO VOC minimal environmental impact formula
SaleBestseller No. 2
CorrosionX Corrosion Technologies 90104 Heavy Duty 12 oz. aerosol
  • Forms a dripless, dynamic, non-hardening, self-healing film that stubbornly resists erosion by splash or spray - including complete submersion in saltwater.
  • Seals out moisture
  • Unlike wax coatings, it will not dry out, stiffen or crack under stress
  • Kills corrosion and keeps it from returning
  • Safe on electronics
SaleBestseller No. 3
CorrosionX Corrosion Technologies 91002 (16 fl oz trigger spray) – Multi-Purpose Lubricant, Penetrant, Rust and Corrosion Preventative | Industrial Strength | Marine Grade | Cleans Lubricates Protects
  • STOPS RUST AND CORROSION with unique Polar Bonding and Fluid Thin Film Coating (FTFC) Technologies
  • BREAKTHROUGH LUBRICANT sticks to metal like a magnet to resist displacement by friction or pressure. Lubricates under extreme loads and high temperatures.
  • AMAZING PENETRANT & ANTI-SEIZE penetrates faster and further to break free rusted nuts, bolts and fittings within minutes
  • SAFE ON ELECTRONICS displaces moisture and protects electronics with a self-healing high dielectric Fluid Thin Film Coating that won’t interfere with circuits
  • ZERO VOC minimal environmental impact formula
Bestseller No. 4
Corrosion Technologies 90101 CorrosionX 6 oz. aerosol
  • STOPS RUST AND CORROSION with unique Polar Bonding and Fluid Thin Film Coating (FTFC) Technologies
  • BREAKTHROUGH LUBRICANT sticks to metal like a magnet to resist displacement by friction or pressure. Lubricates under extreme loads and high temperatures.
  • AMAZING PENETRANT & ANTI-SEIZE penetrates faster and further to break free rusted nuts, bolts and fittings within minutes
  • SAFE ON ELECTRONICS displaces moisture and protects electronics with a self-healing high dielectric Fluid Thin Film Coating that won’t interfere with circuits
  • ZERO VOC minimal environmental impact formula
SaleBestseller No. 5
Corrosion Technologies CorrosionX HD Heavy Duty 90104 (3 Pack of 12 oz aerosol) – Thick Film Lubricant & Rust Preventive | Industrial Strength | Longest-Term Protection Against Weather & Saltwater
  • Forms a dripless, dynamic, non-hardening, self-healing film that stubbornly resists erosion by splash or spray - including complete submersion in saltwater.
  • Seals out moisture
  • Unlike wax coatings, it will not dry out, stiffen or crack under stress
  • Kills corrosion and keeps it from returning
  • Safe on electronics
Bestseller No. 6
CorrosionX Corrosion Technologies 96004 Heavy Duty 1 Gallon
  • Forms a dripless, dynamic, non-hardening, self-healing film that stubbornly resists erosion by splash or spray - including complete submersion in saltwater.
  • Seals out moisture
  • Unlike wax coatings, it will not dry out, stiffen or crack under stress
  • Kills corrosion and keeps it from returning
  • Safe on electronics
Bestseller No. 7
Corrosion Technologies CorrosionX Aviation 84004 (1 Gallon) – Ultra-Thin Film Aviation Grade, Military Performance Requirement Qualified Corrosion Prevention and Control Compound | MIL-PRF-81309H
  • Nontoxic, non-carcinogenic, nonflammable and environmentally friendly
  • Self-curing Fluid Thin Film Coating (FTFC) technology
  • CORROSIONX POLAR BONDING TECHNOLOGY
  • ZERO VOC minimal environmental impact product
SaleBestseller No. 8
Corrosion Technologies CorrosionX XD Extended Duty 97102 (16 oz aerosol) – Medium Thickness Lubricant and Corrosion Preventive | Industrial Strength | Extended Resistance Against Weather and Saltwater
  • Stops rust and corrosion
  • Extended water / weather resistance
  • Safe in electronics
  • Designed to withstand extreme corrosive environments including sulphuric and direct saltwater spray.
Bestseller No. 9
Corrosion Technologies CorrosionX HD Heavy Duty 90104 (CASE of Twelve 12 oz aerosols) – Thick Film Lubricant and Corrosion Preventive | Longest-Term Protection Against Weather & Saltwater
  • Forms a dripless, dynamic, non-hardening, self-healing film that stubbornly resists erosion by splash or spray - including complete submersion in saltwater.
  • Seals out moisture
  • Unlike wax coatings, it will not dry out, stiffen or crack under stress
  • Kills corrosion and keeps it from returning
  • Safe on electronics
Bestseller No. 10
Corrosion Technologies CorrosionX Aviation 80102 (16 oz aerosol) – Ultra-Thin Film Aviation Grade, Military Performance Requirement Qualified Corrosion Prevention and Control Compound | MIL-PRF-81309H
  • QUALIFIED under U.S. military performance requirement MIL-PRF-81309H
  • MILITARY TESTED AND PROVEN over 2X as effective than other corrosion prevention and control products
  • CORROSIONX POLAR BONDING TECHNOLOGY
  • Self-curing Fluid Thin Film Coating (FTFC) technology
  • ZERO VOC minimal environmental impact product

Last update on 2024-06-19 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

 


Leave a Comment

Share to...