| “This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10187923
Manufacturer Communication Number: SSM 49630
Summary
Some 2021 Bronco Sport vehicles built on 01-Oct-2020 and through 31-Dec-2020 could experience a whistle noise coming from the front of the vehicle at highway speeds. To correct this condition, adjust the hood rearward. Refer to Workshop Manual (WSM) Section 501-03>General procedures>Hood alignment (NOTE: hood to fender gap at base of A-pillar to be no less than 2.5mm to avoid paint chips). Provide approximately 6mm flushness offset between the top of the grille and the leading edge of the hood. After hood adjustment, open and close the hood as validation that there is no contact between the Hood and Fender at the A-Pilar. Conduct a highway drive to confirm whistle noise has been corrected.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
FORD | BRONCO SPORT | 2021 |
APPLICABLE VEHICLES
2021 CAR: HD CX430N C-SUV
1 Associated Document
Manufacturer Communications
SSM 49630 – 2021 Bronco Sport – Front Wind Noise Whistle – Built On 01-Oct-2020 And Through31-Dec-2020
MC-10187923-0001.pdf 115.266KB
Loading...
Reload document 
Open in new tab
Bestseller No. 1
PAGOW 4 Pack Plastic Car Door Panel Gap Alignment Gauge Measuring Tool, Taper Feeler for Auto Car Vehicle-Orange Red
- Premium material: This measuring tool is made of high quality material, reliable for long time use.
- Perfectly applicable for checking the mutual position of two adjacent surfaces of vehicles, and correcting body alignment.
- Easy to use: The structure of this tool is very simple and reasonable, easy to measure. Just place the gauge on clearance, and read the measured value.
- Orange gauge & black scale makes the measurement very easy to check.
- Package include: 4 Pack Plastic Taper Gauge Measuring Tool
Bestseller No. 2
SKERJOVL Plastic Car Door Panel Gap Alignment Gauge, Tapered Feeler Measuring Tool for Auto Body, Snake Ruler Tool for Most Vehicles (2PCS)
- 【Quality Materials】:The car door panel gap measuring tool is made of high-quality plastic material with smooth edges that don't hurt your hands, is sturdy and wear-resistant and not easy to deform, and has a long service life. Whether for daily use or professional maintenance, it can stand the test of time and provide you with reliable measurement support.
- 【Utility Function】:The car taper gauge tool is suitable for gap measurement between two adjacent surfaces, correcting body alignment with an accuracy of up to 1mm. Whether it's a door, bonnet, or boot, it helps you quickly locate and adjust to ensure body perfect alignment.
- 【Flexible Design】:The car panel alignment tool has a unique serpentine design that allows it to easily access hard-to-reach areas or tight spaces, such as body seams. In addition, its small size and portability allow it to be used for measurements anytime, anywhere, making it an ideal tool for automotive repair and maintenance.
- 【Easy to Use】:The car gap measuring tool has a simple and reasonable structure, easy to operate. Just simply place the gauge on the gap to quickly obtain accurate data. The orange gauge with a black scale makes the numbers and increments clearly visible and ensures an accurate reading of the measurement results.
- 【Wide Application】:The car body positioning tool is suitable for a variety of scenarios, such as panel gap, material thickness, and hole depth. It is an indispensable and practical tool for all kinds of measurement needs, whether it is a professional auto body shop or a personal DIY enthusiast.
Bestseller No. 3
PAGOW Plastic Car Door Panel Gap Alignment Gauge Measuring Tool, Taper Feeler for Auto Car Vehicle - Orange Red
- Premium Material: This measuring tool is made of high quality material, sturdy and reliable for long time use.
- Perfectly applicable for checking the mutual position of two adjacent surfaces of vehicles, and correcting body alignment.
- Easy to Use: The structure of this tool is very simple and reasonable, easy to measure. Just place the gauge on clearance, and read the measured value.
- Orange gauge & black scale makes the measurement very easy to check.
- Package Included: 1 Pack Plastic Taper Gauge Measuring Tool
SaleBestseller No. 5
Speedway Motors No-Go Auto Body 2"x2" Gap Gauge Tool, .125-.200: CNC Machined High-Density Plastic, Includes Four 1" Blades, Scratch-Resistant & Chemical Resistant
- Compact Design: With dimensions of 2" X 2", the No-Go Auto Body Panel Gap Gauge Tool is conveniently compact, allowing you to easily carry it in your pocket.
- Efficient Usage: Designed to be a fast and easy solution for measuring body panel gaps, this gauge ensures precision in your automotive projects.
- Durable Construction: Precision CNC machined from high-density plastic, this gauge tool is built to last, even in the most demanding environments.
- Versatile Measurements: Includes four 1" long measuring blades of different thicknesses - .125", .150", .175", and .200" - catering to a variety of gap measurement needs.
- Safe for Surfaces: Unlike metal measurement devices, this plastic gauge tool will not scratch finishes, ensuring the integrity of your vehicle's surface. It's also chemical resistant and can be cleaned with acetone or isopropyl alcohol to remove paint residue.
Bestseller No. 6
Yakamoz Taper Gage 1/32-5/8 Inch 1-15mm Stainless Gap Hole Taper Welding Gauge Test Ulnar Inch & Metric
- Both Metric and Stadard reading | Welding taper gauge: 1-15mm (1/64-5/8 inch)
- Accurate figures and increments are etched into surface, easy to read
- Polished, bright and clean without burr, rust laser engraved line and will not rub off
- For measuring of cylindrical bores, hole, gap size, welding gap measure
- Made of stainless steel, miniature and light weight, pocket size
SaleBestseller No. 7
No-Go Auto Body Panel Gap Gauge Tool, .225-.300
- The gauge measures 2" X 2", small enough to easily fit in your pocket.
- A fast and easy way to measure body panel gaps.
- Built to last, this gauge is precision CNC machined from high-density plastic.
- Four numbered 1" long measuring blades .225", .250", .275", and .300" thick.
- Will not scratch finishes like metal measurement devices.
Bestseller No. 8
Panel Gap Alignment Gauge,Door Panel Gap Alignment Simple Measuring Tool Taper Feeler for Auto Body Positioning Measurement Ruler Car Accessories
- 【High-quality materials】Panel Gap Alignment Gauge is made of high-quality materials. craftsmanship and high-quality materials can ensure the durability and stability of the product. The orange meter and black scale make the measurement very easy to check.
- 【Applicability】Panel Gap Alignment Gauge is suitable for all types of cars and is for checking the mutual position of two adjacent surfaces of the car and correcting the alignment of the car body.
- 【Easy to use】 The structure of this tool is very simple and reasonable, easy to measure. Just place the gauge on clearance, and read the measured value.The structure is simple and reasonable, easy to measure.
- 【 to use】Place the gauge on clearance, and read the measured value.Accu e figures and increments are etched into surface, easy to read. A simple tool for correct body alignment.
- 【Quality assurance】 We know that you want high-quality products, which is why we provide a satisfaction guarantee. If for any reason our products do not meet your expectations, please us in time.
Bestseller No. 9
Eastwood Hands Free Panel Gap Setting Tester Tool Kit Flexible Panels & Windscreens with 3 Gap Gauges
- The Eastwood Hands Free Panel Gap Setting Tool Will Help Keep All Your Body Panels Perfectly Aligned During Assembly
- Includes 3 Gap Gauges
- Suction Cups Holds Gauges In Place To Keep Your Hands Free
- Each Gauge Has Ten 0.045" Thick Blades
- Assures Hoods, Doors, Trunks And Other Body Panels Will Have Even Gaps
Bestseller No. 10
FSTURIOS 2 PCS Car Door Panel Gap Alignment Gauge, Plastic Taper Gauge Tool for Auto Body Gap Measurement, Precision Door Alignment Measuring Tool Feeler Ruler for Most Vehicles
- Excellent Function: Featuring precise numbers and scales engraved on the surface, the tool is designed for checking the mutual position of two adjacent surfaces of vehicles and correcting body alignment. Its tapered design makes it an ideal tool for measuring tight spaces and hard-to-reach areas
- Premium Material: Crafted from high-quality plastic, this measuring tool is tough and durable, ensuring it will not warp or break even with frequent use. It is resistant to abrasion and high temperatures, providing superior stability and making it suitable for long-term use
- Easy to Use: This panel gap alignment gauge is designed for simplicity and ease of use. Its intuitive design allows for quick and easy measurements, making it suitable for those with little experience in automotive repair. Simply place the gauge over the gap and read the measurement
- Compact Size: With a length of 9.9 inches (250mm) and a maximum width of 0.68 inches (17.2mm), this measurement ruler is both compact and lightweight. Its portable design allows for easy storage and carrying without taking up too much space, making it convenient for you to access
- Wide Application: This car gap measuring tool can be used to measure door, panel, hood, and trunk gaps for a range of vehicles, including cars, trucks, and SUVs. Its versatility extends to measuring material thickness, hole depth, and more, making it an essential tool for automotive repair
Last update on 2025-07-08 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.