“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10205721
Manufacturer Communication Number: 21B12
Summary
Certain 2017-2019 Model Year Explorer Police Inceptor – Utility / Taurus Police Inceptor -Sedan Vehicles equipped with Front Door Ballistic Panels Front Door Ballistic Panel Replacement; Owner Letter mailed
In some of the affected vehicles, the Level 4 ballistic panel tiles may separate from the aramid backing and cause a rattle noise during door closure


PROGRAM TERMS
This program will be in effect through October 31, 2022. There is no mileage limit for this program.
AFFECTED VEHICLES
Vehicle | Model Year | Assembly Plant | Build Dates |
Explorer Police Inceptor – Utility | 2017-2019 | Chicago | July 18, 2016 through February 26, 2019 |
Taurus Police Inceptor – Sedan | 2017-2019 | Chicago | October 24, 2016 through November 30, 2018 |
REASON FOR THIS PROGRAM
In some of the affected vehicles, the Level 4 ballistic panel tiles may separate from the aramid backing and cause a rattle noise during door closure.
SERVICE ACTION
Dealers are to replace the left hand (LH) (and right hand (RH) if equipped) ballistic panel(s). This service must be performed on all affected vehicles at no charge to the vehicle owner.
NOTE: Review Attachment VI – VIN list prior to replacing both the LH and RH Ballistic Panels. If the ballistic panel on either side has been previously repaired with current service part number – the panel should not be replaced a second time.
NOTE: The technical instructions for this program will not be published on Professional Technician System, please follow the process as outlined in Attachment V to obtain a copy.
OWNER NOTIFICATION AND MAILING SCHEDULE
Owner letters are expected to be mailed the week of October 11, 2021. Dealers should repair any affected vehicles that arrive at their dealerships, whether or not the customer has received a letter.
PARTS REQUIREMENTS / ORDERING INFORMATION
If vehicle is equipped with both LH and RH panels – review Attachment VI – VIN list prior to replacing both the LH and RH Ballistic Panels. If the ballistic panel on either side has been previously repaired with current service part number – the panel should not be replaced a second time.
Vehicle | Part Number | Description | Order Quantity |
Explorer Police Inceptor – Utility | GB5Z-78201B69-A | LH Ballistic Panel | 1 |
Explorer Police Inceptor – Utility | GB5Z-78201B68-A | RH Ballistic Panel (if equipped) | 1 |
Taurus Police Inceptor – Sedan | GG1Z-54201B69-A | LH Ballistic Panel | 1 |
Taurus Police Inceptor – Sedan | GG1Z-54201B68-A | RH Ballistic Panel (if equipped) | 1 |
6 Affected Products
Vehicles
1 Associated Document
Manufacturer Communications
Customer Satisfaction Program 21B12
September 28, 2021
MC-10205721-0001.pdf 466.165KB
NHTSA ID Number: 10201687
Manufacturer Communication Number: 21B12
Summary
Certain 2017-2019 Model Year Explorer Police Inceptor – Utility / Taurus Police Inceptor – Sedan Vehicles equipped with Front Door Ballistic Panels Front Door Ballistic Panel Replacement In some of the affected vehicles, the Level 4 ballistic panel tiles may separate from the aramid backing and cause a rattle noise during door closure
1 Associated Document
Manufacturer Communications
Customer Satisfaction Program 21B12
September 28, 2021
MC-10201687-0001.pdf 223.196KB
- Increased bass and enhanced speaker sound quality
- Eliminates speaker distortion, road noise and rattle
- 3 step easy installation
- Can also be used for: Doors, Trunks, Trunk Lids, Interior Panels, Floorboards and More!
- Highest quality ballistic rubber panel, made in America!
- Panel Size: 24" x 24 "x 1"
- Weight 24 lb each. Pack of 2.
- Premium Quality ballistic rubber. Double the regular life.
- Panel size: 12" x 12 " x 1"
- Weight: 6 LB
- Best quality ballistic rubber, extreme density, NO odor
- Premium Quality ballistic rubber, hot pressed, high density, excellent self-healing, double the life!
- Panel size: 18" x 18 " x 1"
- Weight: 14 LB
- Best quality in US market, Made in USA!
- Black - 1680 Denier Ballistic Nylon fabric cut to 1 linear yard (36 inches) from a 60" wide roll
- Tough, 100% nylon fabric featuring a 2x2 basket weave known for its abrasion resistance, durable construction, and high-tensile strength.
- Fabric is a top-performing choice for rugged applications where strength and wear/water resistance are a high priority.
- Premium Quality ballistic rubber, hot pressed, high density, excellent self-healing, double the lifespan when compared with cold pressed rubber
- Panel size: 12" x 18 " x 1"
- Weight: 10 LB
- Best quality in US market, Made in USA!
- Light-weight fast drying interior lining
- Seamless interior finish for ultimate comfort
- Ballistic nylon with industrial-weight stitching ensures durability
- Three-panel construction for reliable performance
- Open back design for excellent fit and quick on & off
- Innovative and the BEST design for ENVIRONMENT and SHOOTERS for .22, 9mm and up to Magnum calibers and 5.56 / 2.23, 7.62x38, 6.5 CR/Lapua, .338, .308 and equivalent ammo
- Includes a 1" self-healing ballistic rubber front panel, that keeps lead fragments inside, supports the target and slows down the rounds.
- Minimum lead dust and noise impact and safer if filled with rubber mulch. Rubber mulch not included but easy to find it inexpensively at any hardware stores, regular type. For high quality ballistic type, please contact us.
- Steel construction with AR steel back-plate, handle and top trap door. Designed for outdoor use primarily. Indoor use possible only when filled with rubber mulch, proper ventilation and extra caution.
- Patent pending. Dimensions: 12" x 12", about 16" deep, over 50 LB (unfillled). Ships un-assembled.
- Innovative and the ABSOLUTE BEST design for both, the ENVIRONMENT and SHOOTERS able to sustain .22, 9mm, .45, .38 special, .40, .44 Magnum and equivalent ammo
- Includes 1" thick self-healing ballistic rubber panels (front ) that keeps the lead fragments inside, reduces the lead dust escaping, and supports the target mounting and also slows down the rounds.
- Includes ballistic filler, hence reduced lead dust and noise impact, environmentally friendly and SAFER for shooters
- Steel construction with heavy steel AR back-plate, handle and bolt holes to hold it in place during shooting
- Patent pending. Ships un-assembled, or assembled upon special request.
- Full torso and elbow protection
- Hard plastic chest, back, arm & shoulder protection
- Innovative frontal impact absorption panels
- Full articulating spine protection that moves with you
- Lightweight ballistic fabric with mesh stretch panels for superior fit
SEOCONTENT-START
Copyright 2021 Ford Motor Company David J. Johnson Ford
Motor Company Director P. O. Box 1904 Service Engineering Operations Dearborn, Michigan 48121 Ford
Customer Service Division September 28, 2021 TO: All U.S. Ford
and Lincoln
Dealers SUBJECT: Customer Satisfaction Program 21B12 Certain 2017-2019 Model Year Explorer Police Inceptor – Utility / Taurus Police Inceptor – Sedan Vehicles equipped with Front Door Ballistic Panels Front Door Ballistic Panel Replacement PROGRAM TERMS This program will be in effect through October 31, 2022. There is no mileage limit for this program. AFFECTED VEHICLES Vehicle Model Year Assembly Plant Build Dates Explorer Police Inceptor – Utility 2017-2019 Chicago July 18, 2016 through February 26, 2019 Taurus Police Inceptor – Sedan 2017-2019 Chicago October 24, 2016 through November 30, 2018 Affected vehicles are identified in OASIS and FSA VIN Lists. REASON FOR THIS PROGRAM In some of the affected vehicles, the Level 4 ballistic panel tiles may separate from the aramid backing and cause a rattle noise during door closure. SERVICE ACTION Dealers are to replace the left hand (LH) (and right hand (RH) if equipped) ballistic panel(s). This service must be performed on all affected vehicles at no charge to the vehicle owner. NOTE: Review Attachment VI – VIN list prior to replacing both the LH and RH Ballistic Panels. If the ballistic panel on either side has been previously repaired with current service part number – the panel should not be replaced a second time. NOTE: The technical instructions for this program will not be published on Professional Technician System, please follow the process as outlined in Attachment V to obtain a copy. OWNER NOTIFICATION MAILING SCHEDULE Owner letters are expected to be mailed the week of October 11, 2021. Dealers should repair any affected vehicles that arrive at their dealerships, whether or not the customer has received a letter. ATTACHMENTS Attachment I: Administrative Information Attachment II: Labor Allowances and Parts Ordering Information Attachment III: Explorer Police Inceptor – Utility Technical Instructions Attachment IV: Taurus Police Inceptor – Sedan Technical Instructions Attachment V: Technical Instructions – Request Process Attachment VI: VIN List – Ballistic Panel Previously Replaced with Same Part Owner Notification Letter Copyright 2021 Ford
Motor Company QUESTIONS & ASSISTANCE For questions and assistance, contact the Special Service Support Center (SSSC) via the SSSC Web Contact Site. The SSSC Web Contact Site can be accessed through the Professional Technician System (PTS) website using the SSSC link listed at the bottom of the OASIS VIN report screen or listed under the SSSC tab. Sincerely, David J. Johnson Copyright 2021 Ford
Motor Company ATTACHMENT I Page 1 of 2 Customer Satisfaction Program 21B12 Certain 2017-2019 Model Year Explorer Police Inceptor – Utility / Taurus Police Inceptor – Sedan Vehicles equipped with Front Door Ballistic Panels Front Door Ballistic Panel Replacement OASIS ACTIVATION OASIS will be activated on September 28, 2021. FSA VIN LISTS ACTIVATION FSA VIN Lists will be available through https://web.fsavinlists.dealerconnection.com on September 28, 2021. Owner names and addresses will be available by October 29, 2021. NOTE: Your FSA VIN Lists may contain owner names and addresses obtained from motor vehicle registration records. The use of such motor vehicle registration data for any purpose other than in connection with this program is a violation of law in several states, provinces, and countries. Accordingly, you must limit the use of this listing to the follow-up necessary to complete this service action. SOLD VEHICLES • Owners of affected vehicles will be directed to dealers for repairs. • Immediately contact any of your affected customers whose vehicles are not on your VIN list but are identified in OASIS. Give the customer a copy of the Owner Notification Letter (when available) and schedule a service date. • Correct other affected vehicles identified in OASIS which are brought to your dealership. • Dealers are to prioritize repairs of customer vehicles over repairs of new and used vehicle inventory. STOCK VEHICLES • Correct all affected units in your new vehicle inventory before delivery. • Use OASIS to identify any affected vehicles in your used vehicle inventory. TITLE BRANDED / SALVAGED VEHICLES Affected title branded and salvaged vehicles are eligible for this service action. OWNER REFUNDS • Ford
Motor Company is offering a refund for owner-paid repairs covered by this program if the repair was performed before the date of the Owner Notification Letter. This refund offer expires March 31, 2022. • Dealers are also pre-approved to refund owner-paid emergency repairs that were performed away from an authorized servicing dealer after the date of the Owner Notification Letter. Non-covered repairs, or those judged by Ford
to be excessive, will not be reimbursed. • Refunds will only be provided for the cost associated with level IV front door LF and/or RH ballistic panel replacement. Copyright 2021 Ford
Motor Company ATTACHMENT I Page 2 of 2 Customer Satisfaction Program 21B12 Certain 2017-2019 Model Year Explorer Police Inceptor – Utility / Taurus Police Inceptor – Sedan Vehicles equipped with Front Door Ballistic Panels Front Door Ballistic Panel Replacement RENTAL VEHICLES Dealers are pre-approved for up to one days for a rental vehicle. Follow Extended Service Plan (ESP) guidelines for dollar amounts. Rentals will only be reimbursed for the day(s) the vehicle is at the dealership for part replacement. Prior approval for more than one rental day(s) is required from the SSSC via the SSSC Web Contact Site. ADDITIONAL REPAIR (LABOR TIME AND/OR PARTS) Additional repairs identified as necessary to complete the FSA should be managed as follows: • For related damage and access time requirements, refer to the Warranty and Policy Manual / Section 6 – Ford
& Lincoln
Program Policies / General Information & Special Circumstances for FSA’s / Related Damage. • For vehicles within new vehicle bumper-to-bumper warranty coverage, no SSSC approval is required, although related damage must be on a separate repair line with the “Related Damage” radio button checked. o Ford
vehicles – 3 years or 36,000 miles • For vehicles outside new vehicle bumper-to-bumper warranty coverage, submit an Approval Request to the SSSC Web Contact Site prior to completing the repair. CLAIMS PREPARATION AND SUBMISSION • Claim Entry: Enter claims using Dealer Management System (DMS) or One Warranty Solution (OWS) online. o When entering claims: Claim type 31: Field Service Action. The FSA number (21B12) is the sub code. Customer Concern Code (CCC): B19 – Other Body Panel Troubles Condition Code (CC): 01 – Broken Cracked Causal Part Number: 78201B69 Part Quantity: 0 o For additional claims preparation and submission information, refer to the Recall and Customer Satisfaction Program (CSP) Repairs in the OWS User Guide. • Related Damage/Additional labor and/or parts: Must be claimed as Related Damage on a separate repair line from the FSA with same claim type and sub code as described in Claim Entry above. IMPORTANT: Click the Related Damage Indicator radio button. • Rentals: For rental vehicle claiming, follow Extended Service Plan (ESP) guidelines for dollar amounts. Enter the total amount of the rental expense under Miscellaneous Expense code RENTAL. • Refunds: Submit refunds on a separate repair line. – Program Code: 21B12 – Misc. Expense: ADMIN – Misc. Expense: REFUND – Misc. Expense: 0.2 Hrs. o Multiple refunds should be submitted on one repair line and the invoice details for each repair should be detailed in the comments section of the claim. Copyright 2021 Ford
Motor Company ATTACHMENT II Page 1 of 2 Customer Satisfaction Program 21B12 Certain 2017-2019 Model Year Explorer Police Inceptor – Utility / Taurus Police Inceptor – Sedan Vehicles equipped with Front Door Ballistic Panels Front Door Ballistic Panel Replacement LABOR ALLOWANCES Vehicle Description Labor Operation Labor Time Explorer Police Inceptor – Utility Replace LH or RH Ballistic Panel 21B12B 2.0 Hours Explorer Police Inceptor – Utility Replace both LH & RH Ballistic Panel 21B12C 4.0 Hours Taurus Police Inceptor – Sedan Replace LH or RH Ballistic Panel 21B12D 2.2 Hours Taurus Police Inceptor – Sedan Replace both LH & RH Ballistic Panel 21B12E 4.3 Hours NOTE: 21B12C and 21B12E can only be claimed for vehicles with ballistic panels installed in the RH door. PARTS REQUIREMENTS / ORDERING INFORMATION If vehicle is equipped with both LH and RH panels – review Attachment VI – VIN list prior to replacing both the LH and RH Ballistic Panels. If the ballistic panel on either side has been previously repaired with current service part number – the panel should not be replaced a second time. Vehicle Part Number Description Order Quantity Explorer Police Inceptor – Utility GB5Z-78201B69-A LH Ballistic Panel 1 Explorer Police Inceptor – Utility GB5Z-78201B68-A RH Ballistic Panel (if equipped) 1 Taurus Police Inceptor – Sedan GG1Z-54201B69-A LH Ballistic Panel 1 Taurus Police Inceptor – Sedan GG1Z-54201B68-A RH Ballistic Panel (if equipped) 1 Order your parts requirements through normal order processing channels. To guarantee the shortest delivery time, an emergency order for parts must be placed. DEALER PRICE For latest prices, refer to DOES II. RETENTION, RETURN, & SCRAPPING Follow the provisions of the Warranty and Policy Manual, Section 1 – WARRANTY PARTS RETENTION AND RETURN POLICIES. If a replaced part receives a scrap disposition, the part must be scrapped in accordance with all applicable local, state and federal environmental protection and hazardous material regulations. Federal law prohibits selling motor vehicle parts or components that are under safety, compliance, or emissions recall. EXCESS STOCK RETURN Excess stock returned for credit must have been purchased from Ford
Customer Service Division in accordance with Policy Procedure Bulletin 4000. Copyright 2021 Ford
Motor Company ATTACHMENT II Page 1 of 2 Customer Satisfaction Program 21B12 Certain 2017-2019 Model Year Explorer Police Inceptor – Utility / Taurus Police Inceptor – Sedan Vehicles equipped with Front Door Ballistic Panels Front Door Ballistic Panel Replacement REPLACED FSA PARTS INSPECTION AND SIGN OFF Effective March 1st 2021 all parts replaced as part of an FSA repair with a repair order open date of March 1st 2021 or later must be inspected and signed off on the repair order by a member of your dealers fixed operations management team or an employee the task has been delegated to. If the task is to be delegated to a non-management employee, the employee needs to be someone other than the technician who completed the repair and needs to understand the importance of completing this task consistently and accurately. • All parts replaced as part of an FSA repair should be returned to the parts department following the Warranty Parts Retention and Return Policies. • Inspect the replaced parts to verify the FSA repair was completed. • If the FSA repair is found to be complete, the designated employee signs the repair order line or parts return stamp area (electronic or hand signed) for the FSA repair indicating the parts were inspected and validated to have been replaced. • After the parts have been inspected, they should be handled based on the guidance in the parts status report in the Online Warranty System (Hold, Return, CORE, Scrap, etc.). • This process is subject to review during warranty audits for FSA repairs with a repair order open date of March 1st 2021 or later. Any eligible FSA claims requiring parts replacement, found not to have been inspected and signed off during a warranty audit will be subject to chargeback and consideration for enrollment into the Dealer Incomplete Recall Repair Process. Note: Other approvals (electronic or handwritten) for add-on repair lines, dealer owned vehicle repairs, and repeat repairs do not qualify as FSA parts inspection approvals. The post repair FSA parts inspection process (electronic or handwritten) is independent from other warranty approval requirements. The approval by the designated employee implies that the FSA parts were found to be replaced and must be able to be clearly identified on the Repair Order. If multiple FSA’s require approval on a single Repair Order, each applicable occurrence will require individual post repair approval by the designated employee. Copyright 2021 Ford
Motor Company Ford
Motor Company Ford
Customer Service Division P. O. Box 1904 Dearborn, Michigan 48121 October 2021 Customer Satisfaction Program 21B12 Mr. John Sample 123 Main Street Anywhere, USA 12345 Your Vehicle Identification Number (VIN): 12345678901234567 At Ford
Motor Company, we are committed not only to building high quality, dependable products, but also to building a community of happy, satisfied customers. To demonstrate that commitment, we are providing a no-charge Customer Satisfaction Program for your vehicle with the VIN shown above. Why are you receiving this notice? On your vehicle, the front door ballistic panel tiles may separate from the aramid backing. What is the effect? This may result in a rattle noise while closing the door. What will Ford
and your dealer do? In the interest of customer satisfaction, Ford
Motor Company has authorized your dealer to replace the left hand (and right hand if equipped) ballistic panel(s) free of charge (parts and labor) under the terms of this program (Note: Panels that have already been replaced with the latest level part number, do not require replacement). This Customer Satisfaction Program will be in effect until October 31, 2022 regardless of mileage. Coverage is automatically transferred to subsequent owners. How long will it take? The time needed for this repair is less than one-half day. However, due to service scheduling requirements, your dealer may need your vehicle for a longer period of time. What should you do? Please call your dealer without delay to schedule a service appointment for Customer Satisfaction Program 21B12. Provide the dealer with your VIN, which is printed near your name at the beginning of this letter. If you do not already have a servicing dealer, you can access owner.ford
.com for dealer addresses, maps, and driving instructions. Ford
Motor Company wants you to have this service action completed on your vehicle. The vehicle owner is responsible for making arrangements to have the work completed. Copyright 2021 Ford
Motor Company NOTE: You can receive information about Recalls and Customer Satisfaction Programs through our FordPass App. The app can be downloaded through the App Store or Google Play. In addition there are other features such as reserving parking in certain locations and controlling certain functions on your vehicle (lock or unlock doors, remote start) if it is equipped to allow control. COVID-19 (CORONAVIRUS) Ford
dealerships have implemented enhanced protocols to ensure both your safety and the safety of dealership employees. This includes specific procedures for cleaning and disinfecting customer vehicles before and after each vehicle is serviced. In most places, vehicle service has been deemed a critical service. Please contact your local dealer to confirm current service hours. For more information on how Ford
and your local dealer are working hard to keep you on the road during these challenging times, please visit owner.ford
.com. Do you need a rental vehicle? Your dealer is authorized to provide a rental vehicle for your personal transportation at no charge (except for fuel, insurance, and tax) while your vehicle is at the dealership for repairs. Please see your dealer for guidelines and limitations. Have you previously paid for this repair? If you have previously paid for a repair that addresses the issue described in this letter, you may still need to have this service action performed to ensure the correct parts were used. If the previously paid for repair was performed before the date of this letter, you may be eligible for a refund. Refunds will only be provided for service related to left hand (and right hand if equipped) ballistic panel(s). To verify eligibility and expedite reimbursement, give your paid original receipt to your dealer before March 31, 2022. To avoid delays, do not send receipts to Ford
Motor Company. What if you no longer own this vehicle? If you no longer own this vehicle, and have an address for the current owner, please forward this letter to the new owner. You received this notice because our records, which are based primarily on state registration and title data, indicate that you are the current owner. Can we assist you further? If you have difficulties getting your vehicle repaired promptly and without charge, please contact your dealership’s Service Manager for assistance. RETAIL OWNERS: If you have questions or concerns, please contact our Ford
Customer Relationship Center at 1-866-436-7332 and one of our representatives will be happy to assist you. If you wish to contact us through the Internet, our address is: owner.ford
.com For the hearing impaired call 1-800-232-5952 (TDD). Representatives are available Monday through Friday: 8:00AM – 8:00PM (Eastern Time). FLEET OWNERS: If you have questions or concerns, please contact our Fleet Customer Information Center at 1-800-34-FLEET, choose Option Copyright 2021 Ford
Motor Company #3, and one of our representatives will be happy to assist you. If you wish to contact us through the Internet, our address is: fleet.ford
.com. Representatives are available Monday through Friday: 8:00AM – 8:00PM (Eastern Time). Thank you for your attention to this important matter. Ford
Customer Service Division
SEOCONTENT-END
Last update on 2025-05-10 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.