“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10201630
Manufacturer Communication Number: TSB 21-2313
Summary
Some 2022 F-650/F-750 vehicles equipped with the 6R140 transmission that have less than 5,000 miles (8,000 km) and built on or before 05-Jun-2021 may exhibit a fluid leak at the extension housing output shaft seal. This may be due to an extension housing output shaft seal. To correct the condition, follow the Service Procedure to replace the extension housing output shaft seal. NOTE: Extension housing replacement is not required for this repair.


Model:
2022 F-650/F-750
Issue: Some 2022 F-650/F-750 vehicles equipped with the 6R140 transmission that have less than 5,000 miles (8,000 km) and built on or before 05-Jun-2021 may exhibit a fluid leak at the extension housing output shaft seal. This may be due to the extension housing output shaft seal. To correct the condition, follow the Service Procedure to replace the extension housing output shaft seal.
NOTE: Extension housing replacement is not required for this repair.
Action: Follow the Service Procedure steps to correct the condition on vehicles that meet all of the following criteria:
- 2022 F-650/F-750
- Built on or before 05-Jun-2021
- Less than 5,000 miles (8,000 km)
- Leak from the transmission extension housing output shaft seal
NOTE: Part quantity refers to the number of that service part number required, which may be different than the number of individual pieces. Service part numbers contain 1 piece unless otherwise stated. “As Needed” indicates the part is required but the number may vary or is not a whole number; parts can be billed out as non-whole numbers, including less than 1.
Parts
Service Part Number | Quantity | Description | |
GC4Z-7052-B | 1 | Output Shaft Seal | – |
FC4Z-4N272-B | 2 | Driveshaft Flange Bolt | Package Contains 4 Pieces, 8 Pieces Required |
F4HZ-4A254-A | 4 | U-joint Strap | Package Contains 1 Piece, 4 Pieces Required |
W715624-S439 | 1 | Center Bearing Mount Bolt | Package Contains 4 Pieces, 2 Pieces Required |
W718248-S439 | 1 | Center Bearing Mount Nut | Package Contains 4 Pieces, 2 Pieces Required |
XT-10-QLVC ![]() | As Needed | Motorcraft® MERCON® LV Automatic Transmission Fluid (All Markets Except Canada) | – |
CXT-10-LV6![]() | As Needed | Motorcraft® MERCON® LV Automatic Transmission Fluid (Canada Only) | – |
Service Procedure
1. Replace the extension housing output shaft seal. Refer to Workshop Manual (WSM), Section 307-01.
2 Affected Products
Vehicles
1 Associated Document
Manufacturer Communications
21-2313
20 September 2021
- Ford
XT-10-QLVC 5 Quart Mercon-Lv Automatic Transmission Fluid 1 Pack
- -Make sure this fits by entering your model number. -Geniune OEM part
- Geniune Ford
replacement parts are a part of what keeps a vehicle looking and performing its best over the long term, something that the Ford
company has always known. When choosing parts for your Ford
vehicle, make the best choice: Use durable and affordable parts made specifically for the manufacturer of your vehicle. These genuine Ford
parts are a fit for your vehicle. Ford
OEM parts are the way to go if you want to keep your vehicle as close to its original condition as possible.
- Not for use in applications where MERCON V, MERCON SP, Continuously Variable Chain Type Transmission Fluid, Motorcraft Premium Automatic Transmission Fluid, FNR5 Automatic Transmission Fluid or Type F Automatic Transmission Fluid is recommended
- Motorcraft Transmission Fluid - XT105Q3LV
- Item Package Dimension: 12.009L x 8.49W x 4.489H inches
- Item Package Weight - 9.23 Pounds
- Item Package Quantity - 1
- Product Type - AUTO ACCESSORY
- For use in 95% of vehicles including most CVTs in operation with US registered light duty applications
- High performance conditioning agents prolong seal elasticity to prevent leaks
- Improved durability & transmission life with anti-wear technology to avoid costly repairs
- Enhanced high & low temp performance supports transmission fluid in all weather situations
- Full synthetic formula with advanced additives protects against transmission breakdown better than conventional fluids
- Provides excellent performance in electronically controlled automatic transmissions. Dyed red for easy leak detection
- Manufactured with high-viscosity index, premium-quality, hydroprocessed base oils and specially designed performance additives. Helps prevent rust and corrosion
- Provides excellent shifting characteristics at high and low ambient temperatures, and guards against transmission shudder
- Offers excellent thermal, oxidation and shear stability, as well as good low-temperature fluidity. Provides wear protection and inhibits the formation of gum, sludge, lacquer and foam
- Not for use in applications where MERCON V, MERCON SP, Continuously Variable Chain Type Transmission Fluid, Motorcraft Premium Automatic Transmission Fluid, FNR5 Automatic Transmission Fluid or Type F Automatic Transmission Fluid is recommended
- Formulated with full-synthetic base stocks and advanced additive technology to meet the challenging demands of automatic transmissions
- Enhanced anti-shudder protection for smooth shifting and maximum power transfer
- Developed with anti-wear technology to help improve transmission durability
- Engineered with a proprietary blend of base oils and advanced additives to provide better oil flow at low temperatures and greater film protection at higher temperatures
- Product Type:WIRELESS ACCESSORY
- These are Transmission Fluids
- Item Package Weight : 2 pounds
- Item Package Dimension: 13" L x 11" W x 10" H
- Motorcraft MERCON LV is a premium-quality automatic transmission fluid
- Recommended by Ford
Motor Company for use in Ford
, Lincoln
and Mercury
vehicles that require MERCON LV type fluid
- OEM product
- This product also provides excellent performance in electronically controlled automatic transmissions
- Check owner guide and transmission fluid charts for application
- Motorcraft MERCON V is a premium-quality automatic transmission fluid
- recommended by Ford
Motor Company for use in Ford
, Lincoln
and Mercury
vehicles that require either MERCON V or MERCON type fluid
- Do not use in applications where MERCON SP, MERCON LV, continuously variable chain type transmission fluid, Motorcraft premium automatic transmission fluid, FNR5 automatic transmission fluid or Type-F automatic transmission fluid is recommended
- Do not use in transfer cases where MERCON ATF was previously recommended
- Motorcraft MERCON V is suitable for use as a hydraulic oil in a wide variety of industrial applications that call for an ISO 46 or SAE 20W viscosity grade hydraulic oil
SEOCONTENT-START
Warranty Status: Eligible under provisions of New Vehicle Limited Warranty (NVLW)/Service Part Warranty (SPW)/Special Service Part (SSP)/Extended Service Plan (ESP) coverage. Limits/policies/prior approvals are not altered by a TSB. NVLW/SPW/SSP/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool. Labor Times Description Operation No. Time 2022 F-650/F-750: Replace The Extension Housing Output Shaft Seal Includes Time To Check Odometer And Build date (Do Not Use With Any Other Labor Operations) 212313A 1.1 Hrs. Repair/Claim Coding Causal Part: 7052 Condition Code: D4
**************************************************************************************************************
SEOCONTENT-END
Last update on 2025-05-10 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.