NHTSA ID Number: 10202647
Manufacturer Communication Number: SSM 50218
Summary
Some 2021-2022 F-650/750, 2020-2022 Motorhome/Commercial Stripped Chassis vehicles built on or before 20-Sep-2021 with very low miles may experience parking brake drag. This condition typically occurs in less than 3000 miles (4800 kilometers). This condition may be identified even with the hand or pedal actuator mechanism disengaged. Inspect the park brake system for damage and replace parts as required per Workshop Manual (WSM) Section 206-05. If no damage if found, adjust the park brake cables and the park brake shoe adjuster per WSM, Section 206-05. For claiming, use the applicable labor operations of the Service Labor Time Standards (SLTS) Manual.
6 Affected Products
Vehicles
MAKE | MODEL | YEAR |
FORD | F-53 | 2020-2021 |
FORD | F-650 SD | 2021-2022 |
FORD | F-750 SD | 2021-2022 |
APPLICABLE VEHICLES
2020 – 2021 TRUCK: Y3 P131N STRIPPED CHASSIS
2021 – 2022 TRUCK: BC H567N MEDIUM TRUCK
1 Associated Document
Manufacturer Communications
SSM 50218 – 2021-2022 F-650/750, 2020-2022 Motorhome/Commercial Stripped Chassis – Low Miles Parking Brake Drag – Built On Or Before 20-Sep-2021
https://www.nhtsa.gov/recalls?nhtsaId=10202647
- 【Fit for Disc Brake】 The brake caliper press tool is equipped with two groups of push boards: 7.01x2.36 inches and 4.53x2.17 inches, Suitable for most single and twin pistons floating calipers, twin and quad pistons fixed calipers or some sextuplet pistons fixed calipers (Just make sure the piston calipers space can accommodate the spreader)
- 【Working Principle】The spreader can spreading to push the boards or retracting when finished it. (Ajust by the switch). In expanded mode, the centrally located ratchet screw creates uniform thrust to the push boards that can quickly push several pistons in the caliper at the same time. Effectively save energy and greatly improve efficiency.
- 【How to use】Make the push boards both sides Centralized Alignment the pistons, let both sides of the push boards be forced at the same time (press both sides to assist in starting until push boards press the pistons), swing the handle until the push boards press the pistons to the suitable position, last, ajust the switch, retract the boards to remove the spreader.
- 【Size Reference】Two groups of push boards size: 7.01x2.36 inches and 4.53x2.17 inches; Telescopic range: fully retracted: 1.88”, fully expanded: 3.03”.
- Two-Year Customer Service for Five Bananas Brake Caliper Tool. Pls email us first when you have any problem, we promise will provide the best solutions.
- Included: Brake piston calipers equipped with 2 large push plates and 2 brake caliper hooks.Hooks can hang calipers, brake tubing, and other parts to facilitate inspection of other car parts while the brakes are being repaired.The larger plates are held in place by built-in strong magnets and cylindrical pins for quick installation and removal.
- High quality:Brake caliper compressor uses high strength spreading plates with 1/6 inch thickness steel, which is not easy to deform and is durable. The ergonomically designed reinforced handle is efficient, comfortable and non-slip.
- Wide range of applications: Our professional brake caliper press is suitable for all disc brake caliper press ratchets. Suitable for most large trucks and commercial vehicles. Used for dual-piston and four-piston fixed calipers, and single-piston and double-piston floating calipers.The bigger ones more fit for some sextuplet pistons fixed calipers.
- Easy to use: Ratchet technology gives a full 360 degree swing so that the spreader may be placed at any position.The extended reversing lever allows for easy change from spreading to retracting. Fully retracted: 1.88”, Fully expanded: 3.03”
- After-sales Service:If the product has any quality problems, We provide free return&exchange service. you could contact our customer service, we will give you an exact answer within 24h.
- COMPLETE SET: This 8-piece brake tool kit from Orion Motor Tech includes all the necessary accessories for adjustment, removal, and installation of your drum brakes: brake spring pliers, brake spring installers, removers, compressors, retainers, and standard, angled, and mini adjustment spoons
- PREMIUM MATERIAL: The metallic components of this drum brake tool set are made of structural-grade 45# steel to offer good ductility as well as outstanding strength, durability, and longevity; black oxide and chromate coatings ensure all parts are wear and corrosion resistant
- STURDY HANDLES: The 4 brake spring tools feature reinforced ergonomic handles to save you time and spare you effort and aggravation during use
- CUSTOM CASE: The rugged blow-molded case of this rear drum brake tool kit keeps everything well organized and easy to store or transport between jobs
- SATISFACTION GUARANTEED: Orion Motor Tech backs this drum brake tool set with our usual strong warranty and friendly 24/7 customer service, ensuring that you'll enjoy its use for years to come!
- 🚖UNIVERSAL & PROFESSIONAL - The heavy duty brake caliper compression tool kit includes 18 adapters fitting most of vehicles makes and models including American, European, and Japanese. See the Product Description section below for a more complete list.
- 🚖EASY OPERATION - The auto brake piston rewind tool set also includes 2 hand thrust bolt assemblies(right & left). For brake pad and shoe replacement and rotating pistons back into the caliper on your car, truck or 4 wheel drive disc brake vehicles.
- 🚖DURABLE MATERIAL - 45# Carbon steel construction with rust-proof blasted finish, all components are designed for repeated use with high quality materials. Hand thrust bolt has magnetic design to prevent disc adapters from falling off.
- 🚖EASY TO CARRY & STORE - After completed the job perfectly with the corresponding disc adapters and retainer plates, the ABS blow-molded case with pre-sized slots for each component storage and transport while lengthening the life of the brake caliper spreader kit.
- 🚖100% SALE SUPPORT - We back up all products for life, 24*7 fast response customer service free all your concerns. Sincerely thanks for your support to THORSTONE!
- 【𝐖𝐇𝐀𝐓 𝐘𝐎𝐔 𝐆𝐄𝐓】---One 360° rotatable, caliper press tool that can be used in any direction, and it is more efficient and easier to handle than most brake caliper presses. Two large push plates that can apply force evenly. Two caliper hooks to protect the brake fluid lines and calipers. A comprehensive instruction manual.
- 【𝐔𝐍𝐈𝐕𝐄𝐑𝐒𝐀𝐋 𝐁𝐑𝐀𝐊𝐄 𝐂𝐀𝐋𝐈𝐏𝐄𝐑 𝐏𝐈𝐒𝐓𝐎𝐍 𝐓𝐎𝐎𝐋】The brake caliper press tool is compatible from 1.5 inch to 3 inch. Thus, brake caliper compression tool can be compatible with 99% of twin and quad piston fixed calipers, as well as single and twin piston floating calipers. After installing the magnetic plate it is more suitable for six-piston fixed calipers. Admittedly, this tool can repair the brake pads of several cars, thus making the most of its value.
- 【𝐄𝐀𝐒𝐘 𝐓𝐎 𝐔𝐒𝐄】The adjustment switch allows quick switching between expansion and compression modes. The operating handle allows the centrally located ratchet to spread the force evenly in a parallel manner. At the same time, the extended handle and double riveting make use of the process both easy and stable. The brake piston can be compressed effortlessly in seconds. TIPS: BOTH SPREADER PLATES NEED PRESSURE TO START THE RATCHET.
- 【𝐒𝐓𝐔𝐑𝐃𝐘 𝐀𝐍𝐃 𝐃𝐔𝐑𝐀𝐁𝐋𝐄】The thickened push plate is made of 45 gauge steel, which has excellent strength and toughness and is not easily deformed.The ratchet system and adjustment switch are also made of #45 steel, excellent strength and durability. The chrome-plated metal handle is overmolded for a comfortable grip, uniform force, and non-slip.
- 【𝐖𝐎𝐑𝐓𝐇 𝐈𝐍𝐕𝐄𝐒𝐓𝐌𝐄𝐍𝐓】---In addition to getting a high quality tool kit, you will also get an extremely detailed instruction manual. And this manual will teach you how to replace your brake pads. Learning this skill can save you a ton of money or even be used to make money. GallopMax --- strives to give more value to every choice you make! If you have problems, feel free to contact, we're always here!"
- DUAL BRAKE TOOL SET: This 30-piece brake kit from Orion Motor Tech includes all the necessary parts for adjustment, removal, and installation of dual brake vehicles. The 8 drum brake tools include a remover, installer, compressor, retainer, pliers, and standard, angled, and mini adjustment spoons. The 22 disc brake tools include 2 retaining plates, left and right thrust bolt assemblies, and 18 adapters.
- NEAR UNIVERSAL COMPATIBILITY: this drum brake tool kit and caliper wind back tool kit covers hundreds of makes and models of cars and light trucks, whether import or domestic.
- EASY OPERATION: Both the drum brake tool and disc brake caliper tool set offer reinforced ergonomic handles to save you time and spare you effort and aggravation during use. Everything is clearly labeled in the custom blow-molded carrying cases and included instructions.
- PREMIUM MATERIAL: Each part is made of structural-grade steel for good ductility combined with outstanding strength, durability, and longevity. Black oxide and chrome coatings ensure superior long-lasting wear and corrosion resistance.
- SATISFACTION GUARANTEED: Orion Motor Tech backs these brake drum tool kit and brake caliper wind back tool with our usual strong warranty and friendly 24/7 customer service, ensuring that you'll enjoy their use for years to come!
- Replace your pads faster by compressing your inner brake pad and resetting the piston
- Apply maximum torque with this tool's large handle and slip resistant grip
- A 2 piece, heavy-duty construction makes this product highly durable
- Light trucks and domestic cars are all compatible with this tool
- High carbon steel and Chrome-Vanadium steel are mixed to create this corrosion resistant tool
Last update on 2022-08-08 / Affiliate links / Images from Amazon Product Advertising API
This product was presentation was made with AAWP plugin.