| “This site contains affiliate links for which OEMDTC may be compensated” |
| 2.3L HIGH IDLE AT START UP – APPROXIMATELY 2000 RPM |
| FORD: | 2006-2007 Fusion |
| MERCURY: | 2006-2007 Milan |
2006-2007 Fusion and Milan vehicles equipped with a 2.3L engine may experience an extended high idle (approximately 2000 RPM) on start up.
Manual transmission vehicles may also experience an occasional hang-up at 2000 RPM when the clutch is pushed in when coming to a stop.
ACTION:
Reprogram the powertrain control module (PCM) to the latest calibration using IDS or Ford J2534 release 48.12 and higher or 49.1 and higher.
This new calibration is not included in the VCM 2007.5 DVD.
Calibration files may also be obtained at www.motorcraft.com.
Service Information & Reprogramming
Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.
Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:
- Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
- Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)
In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.
J2534 Device 
using Ford Module Programming (FMP) can Reprogram and Configure most Modules.
Latest Calibration Information
Module Build Data (As-Built)
Use VIN to obtain As-Built data
