โThis site contains affiliate links for which OEMDTC may be compensatedโ |
NHTSA ID Number: 10144204
Manufacturer Communication Number: SSM 47405
Summary
Some 2018 Fiesta vehicles equipped with rear drum brakes built on 8-Mar-2018 and through and through 06-Jun-2018 may exhibit a soft brake pedal feel and/or long brake pedal travel. Replace both front brake caliper. Refer to the Workshop Manual (WSM) Section, 206-06. For claiming, use causal part 2B121 and applicable labor operations in Section 02 of the Service Labor Time Standards (SLTS) Manual.
1 Affected Product
Vehicle
FORD![]() | FIESTA | 2018 |
SSM 47405
- Provides an extra margin of safety in extreme braking conditions
- Mix of polyglycol ethers ensures hot brake-system operation will not create dangerous vapor
- Excellent for ABS, disc and drum brake systems
- Delivers braking power when needed by avoiding a spongy pedal
- Both wet and dry boiling points exceed the minimum government standards
- High compatibility. Use with or direct replacement for DOT 3, DOT 4, and DOT 5. 1
- Extended Service Interval (ESI): Lasts 100 percent longer than DOT 3, 50 percent longer than DOT 4, and 10 percent longer than DOT 5. 1
- Exceeds all DOT 3, DOT 4, and DOT 5. 1 standards
- Wet boiling point ~ 365 DegreeF/Viscosity at -40 DegreeC ~ 685mm2/s
- Standard brake fluid has a recommended change interval of 2 years. The recommended change interval for Bosch ESI6 is 3 years.
- Helps provide protection against brake failure from vapor lock
- Helps prevent corrosion in brake system
- Works with all brake system requiring DOT 3 fluids
- Exceeds federal motor vehicle safety standard No. 116
- Meets SAE spec. J1703.
- Premium DOT 3 Brake Fluid has a minimum boiling point of 450ยฐF
- Meets and exceeds DOT 3 and all other Federal and SAE specifications and standards for motor vehicle brake fluids
- Mixes with all DOT 3 approved brake fluids
- Designed for use in disc, drum and ABS brake systems
- Premium brake and hydraulic clutch fluid that protects internal components from corrosion under normal use
- High boiling point to minimize brake fluid boiling and vapor lock
- Excellent low temperature capability and stability when used where lower cold viscosities are required
- Excellent low temperature capability and stability when used where lower cold viscosities are required
- Synthetic quality brake fluid
- Contains special ingredients to guard against vapor lock and moisture absorption
- Exceeds requirements for both DOT 3 and DOT 4 brake fluids
- Specially formulated for DOT 4 brake fluid applications
- Designed for use in disc, drum and ABS brake systems
- Maintains proper movement for safe, effective stopping performance
- Helps deliver a quieter braking system
- Produces smoother pedal travel
- Provides longer brake life and performance
- Install Wagner with total confidence
- An exclusive European formula with an exceptionally high boiling point and superior anti-vapor lock characteristics
- Superior braking during arduous conditions like racing and rallying
- Typical wet boiling point is 270deg. C
Last update on 2025-04-19 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.