“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10148719
Manufacturer Communication Number: SSM 47562
Summary
Some 2018 F-150 vehicles equipped with a 3.0L diesel engines which have experienced fuel system contamination may have damaged fuel system components including the high pressure fuel pump and injectors. Fuel and additives which do not meet the minimum lubrication, cooling, and anti-corrosion properties required by the high pressure fuel system components may cause symptoms including, but not limited to crank no start, long crank hard start, runs rough, low power, engine knocking, exhaust smoke, and or fuel rail pressure slow to build. The Workshop Manual (WSM) Section 310-00E has been updated to include service procedures to address fuel system contamination.
1 Affected Product
Vehicle
MAKE | MODEL | YEAR |
FORD | F-150 | 2018 |
1 Associated Document
Manufacturer Communications
SSM 47562
https://www.nhtsa.gov/recalls?nhtsaId=10148719
- Take Care Of Your Engine With An Every-Tank Solution For Better Performance And Health
- Boosts Cetane Up To 7 Points For Better Fuel Economy And Maintenance
- Adds Lubricity To Protect Fuel System Including Pump And Injectors
- Prevents Rust And Corrosion, Disperses Moisture And Adds Stability To Fuel
- Cleans Fuel System – Deeply cleans any diesel engine’s fuel system including injectors, cylinders, fuel lines, tank, and tank in one fuel treatment lasting up to 6,000 miles
- Cleans Fuel Injectors – Safely removes and prevents Internal Diesel Injector Deposits (IDIDs), External Diesel Injector Deposits (EDID’s) and other forms of varnish and deposits
- Boosts Cetane – Increases cetane by up to 7 points after the fuel system is fully cleaned, for an even more effective boost in combustion, fuel economy, and engine power while reducing DPF regens
- Increases Mileage – Maximizes your MPG's and helps you save at the pump by improving engine performance and fuel combustion, so you can get the most out of your diesel fuel
- Stabilizes and Prevents Rust, Disperses Moisture – Keeps diesel “healthy” using a military grade non-alcohol-based water dispersant plus rust and corrosion inhibitors
- Cleans dirty injectors and prevents injector sticking in both High Pressure Common Rail (HPCR) and older systems
- Boosts cetane up to 6 numbers – engines run smoother with less power lag and faster cold starts
- Effective in all diesel fuels, including ULSD, biodiesel and biodiesel blends
- Fit type: Universal
- Part number: 3064-06
- 40.6 oz bottle treats 400 gallons - Use at every fill-up
- Formulated to address issues with modern diesel fuels
- Incorporates Archoil's proven combustion modifier technology and a strong cetane boost to increase power and response
- Cleans, lubricates and protects your fuel system (including HPCR systems)
- Increases fuel economy (MPG)
- Restores/Increase Horsepower: detergents clean deposits in the injection system
- Reduces Fuel Consumption tests show an average of 4 percent improvement in MPG and gains up to 9.6 Percent
- Cetane Improver improves combustion resulting in better engine starting, running and reduced noise
- Reduces Wear: Lubricity improvers restore lubricity to ultra low sulfur diesel fuels
- Reduces Emissions reduces Smoke and Particulates
- Restores/Increase Horsepower: detergents clean deposits in the injection system
- Reduces Fuel Consumption tests show an average of 4 percent improvement in MPG and gains up to 9.6 Percent
- Cetane Improver improves combustion resulting in better engine starting, running and reduced noise
- Reduces Wear: Lubricity improvers restore lubricity to ultra low sulfur diesel fuels
- Reduces Emissions reduces Smoke and Particulates
- Includes AR6500 Diesel Treatment (40 oz)
- Includes AR6400-D Diesel Fuel System Cleaner
- Restore key fuel system components - injectors, turbo & dpf
- Boost cetane, improve performance and MPG
- AR6400-D is not the remedy for HEUI injector stiction. Please use AR9100 Friction Modifier instead
- Cleans and Lubricates Fuel System: The product contains a blend of detergents and additives that help to clean and lubricate the fuel system, including the fuel injectors, carburetor, and combustion chamber.
- Improves Fuel Economy: The product can help to improve fuel economy by removing deposits and contaminants from the fuel system and improving the efficiency of fuel combustion.
- Reduces Emissions: By improving fuel combustion, the product can also help to reduce exhaust emissions, including harmful pollutants such as carbon monoxide and nitrogen oxides.
- Increases Power and Acceleration: The product can also help to increase power and acceleration by improving the flow of fuel through the system and reducing the buildup of deposits that can impede engine performance.
- Neutralizes Low Sulfur Fuel Problems: Lucas Oil 10013 Fuel Treatment contains a blend of detergents and additives that help to neutralize sulfur and other harmful contaminants that may be present in the fuel system. The detergents work to clean the fuel injectors and carburetor, which can become clogged with sulfur deposits over time.
- Made in the U.S.A. Restores/Increase Horsepower.
- Reduces Fuel Consumption–tests show an average of 4% improvement in MPG and gains up to 9.6%
- Cetane Improver – improves combustion resulting in better engine starting, running & reduced noise
- Reduces Wear – lubricity improvers restore lubricity to ultra low sulfur diesel fuels
- Reduces Emissions – reduces Smoke and Particulates
- Restores/Increase Horsepower: detergents clean deposits in the injection system
- Reduces Fuel Consumption tests show an average of 4 percent improvement in MPG and gains up to 9.6 Percent
- Cetane Improver improves combustion resulting in better engine starting, running and reduced noise
- Reduces Wear: Lubricity improvers restore lubricity to ultra low sulfur diesel fuels
- Reduces Emissions reduces Smoke and Particulates
Last update on 2024-05-07 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.