Some 2019 Transit Connect vehicles built on or after 28-May-2018 may experience a lack of power steering assist or a power steering fault in the message center at start up which may occur after a discharged battery.
An FDRS PSCM programmable module installation (PMI) tool update is now available, if the tool was previously downloaded, refresh PSCM PMI tool before proceeding.
Reprogram the PSCM with the latest version of FDRS.
Use applicable labor operations in Section 03 of the Service Labor Time Standards (SLTS) Manual.
2019 CAR: HC V408E TRANSIT CONNECT
|Diagnostic Software||Interface Device||Complete Vehicle Diagnostics||Module Programming|
|IDS/FDRS||VCM, VCM II, VCMM||X||X||X||X|
|FJDS/FDRS||Compatible J2534 Devices
(Including VCM II and VCMM)
Detailed system requirements, installation, and support information for each product is located under the diagnostics tool support tab for each product.
For use with VCM I, VCM II, VMM and VCMM hardware devices only. The complete factory Ford Motor Company vehicle diagnostic tool that provides complete dealership level vehicle diagnostic coverage for all 1996 to present Ford, Lincoln and Mercury vehicles. The IDS software includes time based access to the IDS software, software updates and calibration files.
For use with compatible J2534 hardware devices. FJDS software provides Ford Module Programming functionality that covers 1996 to present Ford, Lincoln and Mercury module reprogramming functions, plus complete dealership level vehicle diagnostic software for all 2018 to present Ford and Lincoln vehicles. The FJDS software license includes time based access to the FJDS software, software updates and calibration files.
|Drew Tech CarDaq-Plus 2|
|VSI J2534 ECU Reprogrammer|
|Drew Tech Mongoose Pro Oem Diagnostics And Programing Cable Ford|
Module Build Data (As-Built)
Use VIN to obtain As-Built data