2016-2018 Focus RS – 2.3L EcoBoost 350PS – Cylinder Head Gasket And/Or Cylinder Head Replacement – Updated Workshop Manual Procedure
Some 2016-2018 Focus RS vehicles equipped with 2.3L EcoBoost engine may exhibit oil seepage at the block to head surface.
The Workshop Manual (WSM) has been updated.
Refer to Section 303-01D. Revised procedure provides (2) additional 8 mm (0.31 in) drops of silicone sealant using Motorcraft Silicone Gasket and Sealant / TA-30 (WSE-M4G323-A4) on the gasket surface.
SSM 47443
https://www.nhtsa.gov/recalls?nhtsaId=10144929
https://static.nhtsa.gov/odi/tsbs/2018/MC-10144929-9999.pdf
- Sensor-safe, non-corrosive formula designed for superior adhesion to oily surfaces and long term durability
- Superior resistance to powertrain fluids including engine oil, transmission fluid, gear lube and coolants
- Temperature Range -65°F to 500°F (-54°C to 260°C) intermittent
- Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, and differential covers
- Fit Type: Universal
- General Purpose, Clear Rtv Indoor/Outdoor Sealant
- Seals, Bonds, Repairs, Mends And Secures Glass, Metal, Plastics, Fabric, Vinyl, Weather Stripping And Vinyl Tops
- Waterproof, Durable, And Flexible; Resists Water, Weather, And Vibration
- Temperature Range: -75°F To 400°F (-59°C To 204°C)
- Formulated For Hi-Temp Applications, Or Heavy-Duty Use
- Replaces Almost Any Cut Gasket, And Coats Pre-Cut Gaskets To Increase Reliability
- Makes Reliable 'Formed-In-Place' Gaskets That Resist Cracking, Shrinking And Migrating
- Temperature Range Of -65F To 650F Intermittent
- Proudly Made in the U.S.A.
- Red Ultra High Temp sealant is safe for all food contact, you can use it to seal gaps and cracks on your BBQ smoker
- Gasket maker, forms a tough and flexible seal that will not chalk, crack or shrink and is non-slumping
- Adheres to clean metal, glass, ceramic, most non-oily woods, painted surfaces and plastics; not for use on or in aquariums
- Withstands up to 600 degrees F under continuous operating conditions - caulk gun required
- Proudly Made in the U.S.A.
- For Interior or Exterior use, not paintable- Caulk gun required--must unscrew nozzle from tube and pierce inner seal before use; not for use in or on aquariums
- Forms a tough and flexible seal that will not chalk, crack or shrink and is non-slumping
- Adheres to clean metal, glass, ceramic, most non-oily woods, painted surfaces and plastics.Withstands up to 450 degrees F for extended periods
- When cured and washed, this product complies with FDA regulation 21 CFR 177.2600
- Designed specially for high-torque and high vibration applications
- Maximum vibration resistance, with outstanding resistance to oils, cooling and shop fluids
- Low odor and non-corrosive formula
- Suggested Applications: Valve covers, oil pans, intake manifold end seals, timing covers, water pumps, thermostat housings
- HI TEMP RED SILICONE GASKET MAKER & SEALANT: Is an RTV (Room Temperature Vulcanized) Silicone gasketing material, designed for use in mechanical assemblies where the existence of higher, continuous temperatures up to 550º F or 650º F intermittent might exist
- COUNT ON US: For more than 40 years, our products have earned a loyal following from people who take pride in their work. With each product we innovate, we continue to provide the world's strongest bond for your projects
- EASY TO USE: Curing when the product is exposed to the moisture in air, it forms a tough, waterproof seal on most surfaces. It will not shrink or crack, resists weathering and is sensor safe
- VERSATILE & DEPENDABLE: Ideal for automotive, metal, oil pans, exhaust manifolds, water pumps, timing covers, differential covers, drive housings and oven doors
- DO IT YOURSELF: Big or small, you can DIY it with J-B. Our heavy duty adhesives repair & restore it right the first time. JB Weld delivers the legendary performance of the World's Strongest Bond
- Rutland High Temperature Silicone is a great solution to your sealant and adhesive needs
- Forms a tough and flexible seal
- Will adhere to most clean surfaces including: glass, metal, plastics, fiberglass, wood, brick, and stone.
- Seal fireplace inserts, repair solar panels, apply ceramic tiles to your fireplace surround or heat shielding behind your stove, the uses are endless
- Rated to withstand up to 500° F (260° C)
- Proudly Made in the U.S.A.
- Forms a tough and flexible seal that will not chalk, crack or shrink and is non-slumping
- Adheres to clean metal, glass, ceramic, most non-oily woods, painted surfaces and plastics; not for use in or on aquariums
- For Interior or Exterior use, not paintable- Caulk gun required--must unscrew nozzle from tube and pierce inner seal before use, withstands up to 450 degrees F for extended periods
- When cured and washed, this product complies with FDA regulation 21 CFR 177.2600
- Food Contact Safe 350F high temp
- Impervious to all weather conditions
- Bonds to most surfaces
- Excellent for sealing or creating gaskets
- Self curing, easy to app
Last update on 2022-05-19 / Affiliate links / Images from Amazon Product Advertising API
Last update on 2022-05-19 / Affiliate links / Images from Amazon Product Advertising API