3.5L EcoBoost – Illuminated MIL with DTCs P0365 And/Or P0369 – 2018-2019 Ford F-150, Expedition & Lincoln Navigator

NHTSA ID Number: 10160878

Manufacturer Communication Number: SSM 47961

Summary

Some 2018-2019 F-150, Expedition, and Navigator vehicles equipped with a 3.5L EcoBoost engine may exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P0365 and/or P0369 stored in the powertrain control module (PCM). This may be due to low engine oil level, low engine oil pressure, or worn/damaged variable camshaft timing (VCT) units. Before performing Powertrain Control and Emissions Diagnosis (PC/ED) Manual diagnostics, inspect the engine oil level and evaluate any abnormal VCT noise conditions. If engine oil level is correct and no unusual engine noises are present, proceed with normal diagnostics per PC/ED pinpoint test (PPT) DR.

 

2 Affected Products

Vehicle

MAKE MODEL YEAR
FORDeBay logo F-150 2018-2019

 


SSM 47961

https://www.nhtsa.gov/recalls?nhtsaId=10160878
https://static.nhtsa.gov/odi/tsbs/2019/MC-10160878-0001.pdf

 


SSM 47365

https://www.nhtsa.gov/recalls?nhtsaId=10143099
https://static.nhtsa.gov/odi/tsbs/2018/MC-10143099-9999.pdf

 


 

Bestseller No. 1
Castrol GTX Full Synthetic 5W-30 Motor Oil, 5 Quarts
  • 6X better wear protection on critical engine parts than industry standards**
  • 1.3X better sludge protection than industry standards*
  • 3X Stronger against viscosity breakdown than leading full synthetic^
  • Protection for 10,000 miles between oil changes
  • As measured in Sequence VH sludge test vs. API SP limits
SaleBestseller No. 2
Valvoline Advanced Full Synthetic SAE 5W-30 Motor Oil 5 QT
  • Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
  • Delivers 40% stronger wear protection than industry standards to reduce friction and improve fuel economy
  • Provides 15% better deposit defense vs. industry standards, keeping engines cleaner for smoother performance and longer-lasting protection
  • Up to 2.5X better heat protection vs. industry standards to fight harmful sludge formation and thermal breakdown
  • Engineered for excellent low-temperature flow, reducing metal-to-metal contact during cold starts — when most engine wear typically occurs
Bestseller No. 3
Mobil 1 High Mileage Full Synthetic Motor Oil 5W-30, 5 Quart
  • Mobil 1 High Mileage full-synthetic motor oil 5W-30 is designed for engines with over 75,000 miles to go up to 10,000 miles between oil changes.*
  • Utilizes Mobil 1’s signature Triple Action Formula to deliver outstanding engine performance, protection, and cleanliness
  • Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
  • Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
  • Helps extend engine life by working to prevent damaging deposits and sludge buildup
SaleBestseller No. 4
Castrol GTX High Mileage 5W-30 Synthetic Blend Motor Oil, 5 Quarts
  • Phosphorus Replacement Technology helps extend emission system life
  • Superior dispersancy that fights sludge build up
  • Exceptional oil burn-off protection exceeding industry standards* | Seal conditioners to help reduce leaks
  • Advanced additives that help prevent engine wear | Improved Fuel Economy**
  • Meets or exceeds the following specifications: API SP/SN PLUS/SN/SM | ILSAC GF-6 | Meets FordeBay logo WSS-M2C946-B1 | Meets FordeBay logo WSS-M2C961-A1 | * Based on API and ACEA volatility specifications | ** In 5W-20, 5W-30 and 10W-30 grades versus industry specifications
Bestseller No. 5
Mobil 1 Extended Performance High Mileage Full Synthetic Motor Oil 5W-30, 5 Quart
  • Mobil 1 Extended Performance High Mileage full-synthetic motor oil 5W-30 is designed for engines with over 75,000 miles to go up to 20,000 miles between oil changes.*
  • Utilizes Mobil 1’s Triple Action+ Formula to combine outstanding engine performance, protection, and cleanliness with the added benefit of power
  • Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
  • Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -40 degrees F)
  • Helps extend engine life by working to prevent damaging deposits and sludge buildup

This product presentation was made with AAWP plugin.

Leave a Comment

Share to...