Engine Oil Leak From Oil Filter Adapter Or Oil Cooler

SSM 47364

2015-2018 Mustang GT350 – Engine Oil Leak From Oil Filter Adapter Or Oil Cooler

Some 2015-2018 Mustang GT350s may exhibit an engine oil leak that appears to be originating from the oil filter adapter or oil cooler.

If the leak appears to be originating from the oil cooler, be aware that the leak may actually be originating from the oil filter adapter, and oil may run down the oil cooler tubes and drip off of the cooler, making it appear that the leak is originating from the oil cooler.

If the true source of the leak is caused by a damaged O-ring where the oil cooler tubes meet the oil filter adapter, be aware that these O-rings are now available as a separate service part from the oil cooler tubes.

Replacement O-rings can be ordered using part number FR3Z-00815-A.

For claiming, use causal part 6B850 and applicable labor operations in Section 6 of the Service Labor Time Standards (SLTS) Manual.

FORD

MUSTANG

2015-2018

SSM 47364

https://www.nhtsa.gov/recalls?nhtsaId=10143098

Bestseller No. 1

Castrol EDGE 5W-50 Advanced Full Synthetic Motor Oil, 1 Quart

3X Stronger than the leading full synthetic*
10X Better high stress performance**
20,000 miles between oil changes***
Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
As measured in Seq IX test under high load/torque conditions vs. API SP test limits

SaleBestseller No. 2

Castrol EDGE 5W-50 Advanced Full Synthetic Motor Oil, 1 Quart, Pack of 6

3X Stronger than the leading full synthetic*
10X Better high stress performance**
20,000 miles between oil changes***
Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
As measured in Seq IX test under high load/torque conditions vs. API SP test limits

Bestseller No. 3

Mobil 1 Advanced Full Synthetic Motor Oil 15W-50, 5 Quart

Mobil 1 advanced full synthetic motor oil 15W-50 helps to protect your engine from the five factors that can damage engines over time
Helps to protect critical engine parts for up to 10,000 miles between oil changes*, controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
Provides low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean
Helps extend engine life by working to prevent damaging deposits and sludge buildup
Provides excellent internal engine heat protection (up to 500 degrees F) and low temperatures (to -40 degrees F)