18C05 – Improperly Adjusted Parking Brake Cable/FMVSS 105 – 2018 Ford F-650 & F-750

“This site contains affiliate links for which OEMDTC may be compensated”

NHTSA Campaign Number: 18V319
Manufacturer Ford Motor Company
Components PARKING BRAKE
Potential Number of Units Affected 151

 

Improperly Adjusted Parking Brake Cable/FMVSS 105

For vehicles equipped with a transmission that does not have a ‘Park’ position or a transmission that has a ‘Park’ position but the transmission lever is not placed in ‘Park’, an improperly adjusted park brake cable could result in unintended movement of the vehicle, increasing the risk of a crash or injury.

 

Summary

Ford Motor Company (Ford) is recalling certain 2018 Ford F-650 and F-750 vehicles equipped with hydraulic brakes. The parking brake cable may not have been adjusted properly, which may result in unexpected vehicle movement. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 105, “Hydraulic and Electric Brake Systems.”

 

Remedy

Ford will notify owners, and dealers will correct the parking brake cable adjustment, free of charge. The recall is expected to begin May 21, 2018. Owners may contact Ford customer service at 1-866-436-7332. Ford’s number for this recall is 18C05.

 

Notes

Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.

 

Check if your Vehicle has a Recall

 


Recall Acknowledgement

May 17, 2018

https://static.nhtsa.gov/odi/rcl/2018/RCAK-18V319-5731.pdf

Loader Loading...
EAD Logo Taking too long?

Reload Reload document
| Open Open in new tab

Download [298.42 KB]

 


 

Bestseller No. 1
LUCAS OIL 10826 Brake Fluid - 1 Quart
  • High quality blend of polyethylene glycol ethers and additives
  • Compatible with all brake system rubber components and other brake fluids
  • Prevents seal hardening or softening
  • Protects against rust and corrosion
  • Provides excellent lubricity
SaleBestseller No. 2
BOSCH ESI6-32N Brake Fluid (Direct Replacement for DOT 3, DOT 4, and DOT 5.1) - 1 Quart
  • High compatibility. Use with or direct replacement for DOT 3, DOT 4, and DOT 5. 1
  • Extended Service Interval (ESI): Lasts 100 percent longer than DOT 3, 50 percent longer than DOT 4, and 10 percent longer than DOT 5. 1
  • Exceeds all DOT 3, DOT 4, and DOT 5. 1 standards
  • Wet boiling point ~ 365 DegreeF/Viscosity at -40 DegreeC ~ 685mm2/s
  • Standard brake fluid has a recommended change interval of 2 years. The recommended change interval for Bosch ESI6 is 3 years.
Bestseller No. 3
Prestone AS401 DOT 3 Synthetic Brake Fluid - 32 oz.
  • Provides an extra margin of safety in extreme braking conditions
  • Mix of polyglycol ethers ensures hot brake-system operation will not create dangerous vapor
  • Excellent for ABS, disc and drum brake systems
  • Delivers braking power when needed by avoiding a spongy pedal
  • Both wet and dry boiling points exceed the minimum government standards
Bestseller No. 4
Liqui Moly BRAKE FLUID DOT 4 1LTR
  • Premium oil imported from Germany
Bestseller No. 5
Quicksilver 8M0128415 DOT 4 Brake Fluid – 12 Ounce
  • The 336⁰F wet boil point and 521⁰F dry boil point exceeds common characteristics for DOT 4 brake fluids
  • Provides corrosion protection in brake components
  • Matches needs of all DOT 4 manufacturer recommendations
  • Compatible with all DOT 3 and DOT 4 applications
Bestseller No. 6
Johnsen's 5034 Premium Synthetic DOT-4 Brake Fluid - 1 Gallon
  • Synthetic quality brake fluid
  • Contains special ingredients to guard against vapor lock and moisture absorption
  • Exceeds requirements for both DOT 3 and DOT 4 brake fluids
  • Specially formulated for DOT 4 brake fluid applications
  • Designed for use in disc, drum and ABS brake systems
Bestseller No. 7
ACDelco GM Original Equipment 10-4110 DOT 3 Hydraulic Brake Fluid - 16 oz
  • Premium brake and hydraulic clutch fluid that protects internal components from corrosion under normal use
  • High boiling point to minimize brake fluid boiling and vapor lock
  • Excellent low temperature capability and stability when used where lower cold viscosities are required
  • Excellent low temperature capability and stability when used where lower cold viscosities are required
Bestseller No. 8
Johnsen's 2234 Premium DOT-3 Brake Fluid - 1 Gallon
  • Premium DOT 3 Brake Fluid has a minimum boiling point of 450°F
  • Meets and exceeds DOT 3 and all other Federal and SAE specifications and standards for motor vehicle brake fluids
  • Mixes with all DOT 3 approved brake fluids
  • Designed for use in disc, drum and ABS brake systems
Bestseller No. 9
STP Heavy Duty Brake Fluid, Dot 3 Brake Fluid Protects Brake Systems, ABS, Disc and Drum Systems, 12 Oz, STP
  • Helps provide protection against brake failure from vapor lock
  • Helps prevent corrosion in brake system
  • Works with all brake system requiring DOT 3 fluids
  • Exceeds federal motor vehicle safety standard No. 116
  • Meets SAE spec. J1703.
SaleBestseller No. 10
ATE Original TYP 200 Racing Quality DOT 4 Brake Fluid, 1 Liter Can
  • Minimal decrease of boiling point due to excellent water locking properties
  • Non-foaming when filling and bleeding the brake system
  • Excellent corrosion protection due to selected additives
  • High safety tolerance against steam bubbles
  • Makes brake fluid changing intervals of up to 3 years possible

Last update on 2024-06-06 / Affiliate links / Images from Amazon Product Advertising API

This product presentation was made with AAWP plugin.

Leave a Comment

1
Share to...