“This site contains affiliate links for which OEMDTC may be compensated” |
TSB 17-0059
|
CREAK NOISE DURING BODY FLEX AND/OR TWIST – LEFT SIDE B PILLAR AND/OR LEFT SIDE ROCKER PANEL – BUILT ON 17-JAN-2017 AND THROUGH 15-MAY-2017 |
Publication Date: August 18, 2017 |
FORD: | 2017 Escape |
ISSUE:
Some 2017 Escape vehicles built on 17-Jan-2017 and through 15-May-2017 may exhibit a creak noise during body flex and/or twist coming from the left side lower B-pillar and/or rocker panel. This may be due to a lack of rocker panel bracket to inner rocker panel clearance.
ACTION:
Follow the Service Procedure steps to correct the condition.
SERVICE PROCEDURE
- Drive the vehicle over uneven, rough roads and/or twist body structure by performing turns. Does the vehicle exhibit a creak noise from the left side rocker panel and/or lower B-pillar area?
- Yes – proceed to Step 2.
- No – this article does not apply. Refer to Workshop Manual (WSM), Section 100-04 for normal diagnostics.
- Remove one plastic push pin from the left rear fender splash shield and position the fender splash shield aside. Remove the rubber body plug installed in the end of the rocker panel.
- Using a prybar or equivalent tool of approximately 61 cm (24”) long, create a 2-4 mm (0.079-0.157 inches) clearance between the rocker panel bracket and the rocker inner panel. (Figure 1)
Figure 1 – 17-0059
- Apply ValuGard™ Rust Inhibitor VG104, VG104A or equivalent to the inner surfaces of the rocker panel where interior corrosion coating damage may have occurred during the prying process. Refer to WSM, Section 501-25.
- To install, reverse the removal procedure. Refer to WSM, Section 204-04.
Obtain Locally
Part Number | Part Description |
VG104, VG104A | ValuGard™ Rust Inhibitor |
Suggested Tool List
Size | Tool Description |
1/2” | Impact Gun |
1/2” | 19 mm Deep Impact Socket |
Trim Tool | |
24” – 36” | Pry Bar |
1/2” | 19 mm Torq Stick |
OPERATION | DESCRIPTION | TIME |
170059A | 2017 Escape: Road Test And Adjust The Rocker Panel Bracket Following The Service Procedure (Do Not Use With Any Other Labor Operations) | 0.7 Hr. |
WARRANTY STATUS
Eligible Under Provisions Of New Vehicle Limited Warranty Coverage.
Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.
DEALER CODING
BASIC PART NO. | CONDITION CODE |
7810111 | 12 |
17-0059
- Perfect for use on bare or primed metal underbodies of cars, trucks, trailers, RVs and more
- Rubberized formula protects against corrosion and damage from water, salt and other chemicals
- Dries to the touch in 30 minutes and covers up to 10-12 sq. ft. per can
- Undercoating helps deaden sound and reduce damage to parts
- Features a wide, comfort spray tip and any-angle spray technology for easy painting even upside down
- Perfect for use on bare or primed metal underbodies of cars, trucks, trailers, RVs and more
- Professional-grade formula provides superior protection against corrosion and damage from water, salt and other chemicals
- Dries to the touch in 1 hour and covers up to 10-15 sq. ft. per can
- Undercoating helps deaden sound and reduce damage to parts
- Features a wide, comfort spray tip and any-angle spray technology for easy painting even upside down
- Easy to use spray seals and protects metal surfaces from corrosion and moisture
- Flexible, rubberized coating provides superior chemical and abrasion resistance
- Dries to touch in 1-2 hours and covers 85-175 sq. ft. per qt. with rust protection
- Apply by brush, roller or spray to repair rust problems and prevent future issues
- Creates a protective coating with no shine, flat finish on rusted or bare metal
- FRAME COATING: This special aerosol spray is both a rust prevention and rust destroyer formula rolled into one. It will not only protect your chassis from the start of rust formation and allow you to maintain a clean finish, it also eliminates the need for any future maintenance or repairs, ensuring that it will be as good as new for years to come.
- HOW TO USE: Shake the can vigorously for at least 1 minute before and occasionally during use. Insert extension tube into spray nozzle then insert extension nozzle into frame openings, bolt holes, etc.Depress spray button and apply coating while pulling the extension nozzle back from the opening. Continue in all areas you can for complete coverage.
- EASTWOOD QUALITY: Eastwood offers solutions which combines our 4,000+ unique products with the know-how to “Do The Job Right”. With an In-house product design, development and testing and a strong track record of high-quality, innovative products. Used and trusted by top builders to beginners and also provides a Lifetime Tech Support.
- SAFETY INFORMATION: Always wear eye, skin and respiratory protection when applying this product.Use in a well ventilated area away from open flame. Store spray in a cool dry place. Warning: This product contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.
- WARRANTY: Comes with a 90-day limited warranty and 90-day return.
- MULTI-PURPOSE UNDERCOATING may be applied to cars, truck and recreational vehicles
- SOUND DEADENING PROPERTIES help reduce road noise
- ASPHALT-BASED product is excellent for wheel wells, quarter panels, interior fenders, under the hood and more
- PROTECTS THE UNDERCARRIAGE of vehicles from rust and abrasion
- AEROSOL DISPENSER allows for easy spray-on application
- Use on any rusty, metal surface to Instantly convert rust to a flat black, paintable surface that is protected and prevents future rust
- Oil based formula creates a bond with rusted surface that can be easily painted
- Dries tack free in 20-40 minutes, allow 24 hours before applying topcoat
- Unique formula transforms rusted surfaces saving time and effort sanding rust all the way down to bare metal
- Any-angle spray technology allows the can to be sprayed in any direction, even upside down
- It Matches Oem Textures And Provides Excellent Abrasion And Stone Chip Protection, Sound Deadening And Corrosion Resistance
- This Product Is Ideally Suited For Applications Where Heavy Or Coarse Texture Patterns Are Desired.
- Easily Applied With A Custom Coat Blg-684 Gun Or A 3M Schutz Gun; Fast Drying
- 50 State Voc Compliant
- FLUID FILM BLACK offer powerful corrosion protection for all metals and superior lubrication for moving parts. The long lasting thixotropic liquids and gels is aptly used in the highly corrosive marine environment and vehicle undercoating in the automotive and snow handling industries
- HOW IT WORKS. The wet barrier creeps and migrates into tight seams and into the metal chassis to provide corrosion protection from salts and brines. Protects your vehicle while restoring a rich black color to the chassis or cover existing rust
- NO SOLVENT. Formulated from specially processed wool-wax, highly refined petroleum oils and selected agents, providing a non-toxic, non-irritating, non-flammable coating for corrosion control, penetration, metal wetting and water displacement
- WIDELY USED for maintenance of locks & hinges at home, lawn & garden tools & equipment, as well as in the aviation and automobile industries. In government and commercial facilities. Equipment in fishing, gas companies, farming, salt, power and industrial plants
- SALVAGE DAMAGES. Damaged, heavily corroded and/or frozen parts such as nuts, bolts, shafts, etc. can be salvaged by applying FLUID FILM BLACK. It provides a non-toxic, non-irritating, non-flammable coating that remains in a permanently soft gel state
- Use on cars, trucks, and recreational vehicles
- Coating helps prevent damage corrosion
- Helps reduce road noise
- Clean application
Last update on 2024-04-18 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.