SSM 47238
2018 Escape – 1.5L EcoBoost – Illuminated Malfunction Indicator Lamp (MIL) with Diagnostic Trouble Code (DTC) P04DB
Some 2018 Escape vehicles equipped with a 1.5L EcoBoost engine may exhibit an illuminated MIL with DTC P04DB (crankcase ventilation system disconnected) in the powertrain control module (PCM).
Inspect the crankcase pressure sensor tube at the rear air intake system connection for a partial disconnect.
Disconnect the quick release coupling on the crankcase pressure sensor tube assembly and inspect the O-Ring for damage.
Refer to Workshop Manual (WSM), Section 303-12.
Engineering is currently investigating.
To assist with the investigation, use the Report a Vehicle Concern link at the bottom of the OASIS report and submit a Global Concern Report (GCR).
Monitor OASIS for updates.
SSM 47238
https://www.nhtsa.gov/recalls?nhtsaId=10137135
Bestseller No. 1
OBD2 Scanner Car Scan Diagnostic Tool Reset Clear Check Engine Code Reader for All OBD II Vehicles LeeKooLuu LK11
- ćAuto OBDII Scanner Diagnostic Tool:ćEasy-to-use plug-in-play car scanner that read and clear codes.Retrieves generic code and displays DTC definitions. It can check engine related fault codes,easily find out what caused.
- ćWide Compatibility:ćCode readers & scan tools are compatible with all OBD II and CAN Compliant vehicles,passenger cars or light trucks,post 1996 in US,post 2000 for EU-based and Asian cars.Not compatible with new energy and hybrid vehicles.
- ćFreeze Frame Date For Accurate Diagnosis:ćCar code reader comes with viewing freeze frame function that enables you to retrieve data recorded in the ECU of the condition under which the fault occurs to figure out why the check engine light is on and cut down test drive verification time.
- ćI/M Readiness Function:ć Car diagnostic scanner comes with I/M Readiness function to check the operations of the Emission System on OBD2 compliant vehicles.It includes vehicle-specific number of monitors like misfire monitor, fuel system monitor,Comprehensive component monitor, Oxygen sensor heater monitor,EVAP system and etc.It can help get your vehicle ready to pass the annual smog check.
- ćRetrieve Vehicle Infor:ć Vehicle code reader enables retrieval of Vehicle Identification No. (VIN), Calibration ID(s), Calibration Verification Nos. (CVNs). This function is most useful to check whether the ECU matches your car.
SaleBestseller No. 2
FOXWELL NT301 OBD2 Scanner Professional Mechanic OBDII Diagnostic Code Reader Tool for Check Engine Light
- ćVehicle CEL DoctorćThe NT301 obd2 scanner enables you to read DTCs, locate bad O2 sensors, access to emissions readiness status, turn off CEL(check engine light) or MIL, reset monitor, read live data and retrieve VIN of your vehicle.
- ćAccuracy & StreamsćLive data graphing and logging. Accurately read error codes for most Worldwide cars, SUVs, light trucks and 12V diesels equipped with Obd2. Graphing live vehicle sensors data allows you to focus on any suspicious data and trend.
- ćWorthy to OwnćRecommended by Mechanic Scotty Kilmer on Youtube. Codes analysis and Printer compatible. Unique PATENTED design, 2.8" color screen, Free Lifetime Update and 1-year seller assurance with EXCLUSIVE tech and service team.
- ćSmog Check HelperćRead/Erase and I/M readiness hotkeys make it easy to use the car computer reader right out of the package. Red-Yellow-Green Leds and build-in speaker indicate the readiness status for confident emissions test.
- ćHome NecessityćOpen to global customers. No battery required, NT301 obd scanner is charged directly from the 16pin DLC in your vehicle. It is recommended as a necessity in your toolbox and one of the best gifts for Home and Autoshop Mechanics.
SaleBestseller No. 3
MOTOPOWER MP69033 Car OBD2 Scanner Code Reader Engine Fault Code Reader Scanner CAN Diagnostic Scan Tool for All OBD II Protocol Cars Since 1996, Yellow
- ā ćMulti-Functionsć- Practical Multi-Functions OBD2 code reader features built-in OBD2 DTC lookup library, which help you to determine the cause of the engine light, read code, erase code, view freeze frame, I/M ready, vehicle information, data flow, real-time curve, get vehicle speed information, calculate load value, engine coolant temperature, get engine speed.
- ā ćWide Capabilityć- Supports 9 protocols compatible with most 1996 US-Based, 2000 EU-Based and Asian cars, and newer OBD II & CAN domestic or import vehicles. Supports 6 languages - English,German, Dutch, Spanish, French, Italian.
- ā ćLCD Displayć- Designed with a clear display LCD screen (128 x 64 pixels) - white backlight and contrast adjustment. No need any battery or charger, OBD reader gets the power directly from your vehicle through the OBDII Data Link Connector.
- ā ćCompact Designć- Car diagnostic scanner is equipped with a 2.5 feet long cable and made of a very thick flexible insulator.There are 6 buttons on OBD2 Scanner:scroll up/down,enter/exit and buttons that quick query VIN vehicle number& the DTC fault code.
- ā ćABS / Airbag codes NOT Supportedć- It is able to read and clear check engine information which is part of OBDII system, but it cannot work with non-OBDII systems, including ABS / Airbag / Oil Service Light, etc.
Bestseller No. 4
BAFX Wireless Bluetooth OBD2 Scanner Code Reader & Diagnostic Tool ā for Android - Car Scanner for All Cars, Trucks & Autos 1996 or Newer in USA ā Elm327 Compatible OBDII Scan Tool
- [Compatible] Our automotive OBDII diagnostic engine reader works with all consumer automotive vehicles, cars & trucks in the USA that are model year 1996 or newer! Compatibility varies depending on vehicle country of location. See product description to check your vehicles computer compatibility based on your country of location. (NOT IPHONE / iOS COMPATIBLE)
- [Simple To Use] Plug our OBD2 diagnostic scanner into your vehicles automotive OBD2 port; Pair diagnostic scan tool with your Android phone via Bluetooth; Download an app to use it with; Then connect & start scanning for live sensor data like a professional direct from your vehicles on board computer! (NOT IPHONE / iOS COMPATIBLE)
- [Fix & Service Your Car For Less] Using our diagnostic code reader you can read, reset & clear your check engine error light fault codes with your Android phone (does not read ABS or SRS). Check and fix your emissions system readiness, know if you will pass emissions & smog test before you go with our diagnostic tool! (NOT IPHONE / iOS COMPATIBLE)
- [Live Data] Monitor live real time live gauge data direct from your autos computer systen with our diagnostic trouble code reader such as O2 sensors, fuel pressure, Engine load & more; Freeze fram data; Map based sensor tracking plus so much more! Making it extremely easy to check up on the health of your vehicle just like the pros! Our automotive health tool will help you keep your gas or diesel vehicles running many miles longer!
- [Guaranteed] Unlike other OBD2 car diagnostic scanners we guarantee ours will work on ALL OBDII protocols including J1850 which many have problems with! Works on both gas & diesel vehicles. Reads at faster speeds than most other OBDII wireless Bluetooth OBD 11 readers.
Bestseller No. 5
BlueDriver Bluetooth Pro OBDII Scan Tool for iPhone & Android
- MORE CODES: To understand the problem with your vehicle you need the complete picture. With an up-to-date modern scan tool, you scan deeper to read, understand, and clear more codes. Access information normally only available to professional mechanics on their most expensive scan tools.
- REAL FIXES: Get unlimited vehicle specific Repair Reports, generated from our database of millions of fixes verified by Professional Automotive Technicians. Save time and money.
- NO CORDS: All the capabilities of an expensive scan tool (extended vehicle coverage, live data, etc.) combined with the power and convenience of your smartphone or tablet. No cords, no subscriptions, and regular free updates.
- LIVE DATA: View live data and monitor your vehicleās health in real time. Configure the data sources, customize your view with various displays and colours, and log and export live data as a file.
- BlueDriver is proudly American owned and is the OBD2 Diagnostic Scan Tool trusted by professional mechanics and developed and supported by Professional Engineers.
SaleBestseller No. 6
Autel MS309 OBD2 Scanner Car Check Engine Code Reader, Check Emission Monitor Status, 2022 Newest CAN Diagnostic Scan Tool for All OBD II Protocol Vehicles Since 1996
- šćLittle One, Big JobsćThis MS309 obd2 scanner can pay for itself in the first use. Autel MaxiScan MS309 is a plug-and-play handheld OBD2 code reader capable of scanning vehicle Diagnostic Trouble Codes (DTCs) in seconds to pinpoint emission-related issues. The little guy can do many basic but necessary works: read/clear codes, view DTC definition, turn off check engine light, check I/M Readiness status, retrieve freeze frame data and vehicle info, etc.
- šćRead Codes & Clear CodesćKnowing the codes in advance will brace you for the cost estimate to fix at the repair shop, so you can obviously save hundreds of dollars on diagnostics alone, why not? You can use MS309 to retrieve generic codes, manufacturer-specific codes, and pending codes in seconds and display DTC definitions under the codes, quickly locating the problem areas, then clear/reset the codes after proper repairs.
- šćTurn Off Check Engine LightćWhen your car detects an emission related problem, Check Engine Light will be turned on. Do you want to spend hundreds of dollars to turn off this light every time, maybe it's just a gas cap that's not tightened or needs to change bad parts like spark plugs and ignition coils? With Autel MS309 scan tool, you can read code to quickly find out why the check engine light is on and reset it.
- šćReady For Annual Smog CheckćIf the OBD II Readiness Monitors on your car are not āReadyā, your car may fail the smog check. MS309 OBD2 scanner can retrieve I/M Readiness status to check the monitors like misfire monitor, fuel system monitor, comprehensive components monitor, catalyst monitor, O2 sensors, EVAP, etc, to help your car ready pass the annual smog check. That way you won't waste time and money on a failed smoke check.
- šćOn-Screen DTC Definition, Easy To Useć Isn't that exactly what you want? Each code is followed by its definition, saving time and effort, quickly locating the problem location, perfect for car DIYers and beginners. When you are reading codes, the corresponding DTC definition is placed below the code. MS309 OBDII scan tool communicates with vehicles through a standard 16-PIN OBD2 cable and itās powered by vehicle directly- no battery needed.
SaleBestseller No. 7
How To Use Automotive Diagnostic Scanners: - Understand OBD-I and OBD-II Systems - Troubleshoot Diagnostic Error Codes for All Vehicles - Select the ... Tools and Code Readers (Motorbooks Workshop)
- Martin, Tracy (Author)
- English (Publication Language)
- 200 Pages - 08/01/2015 (Publication Date) - Motorbooks (Publisher)
Bestseller No. 8
Autel OBD2 Scanner MaxiScan MS309 Car Check Engine Code Reader, Check Emission Monitor Status, 2022 Newest CAN Diagnostic Scan Tool for All OBD II Protocol Vehicles After 1996
- šćFreeze Frame DataćOBD2 code reader with UPGRADED CHIP to read, diagnose and clear DTC, universal DTCs (Diagnostic Trouble Codes) meanings based on the built-in database(more than 3000 codes), determines the malfunction indicator lamp (MIL) status, turn off check engine light, shows engine parameters, scan I/M readiness/ monitor status (UPDATED FUNCTION), views freeze frame data(retrieve data record)(UPDATED FUNCTION) Don't worried outbreak outside.
- šćRetrieve Vehicle InfoćOBD2 code reader enables retrieval of the Vehicle Identification No. (VIN), Calibration ID(s), Calibration Verification Nos. (CVNs). VERY USEFUL to check whether the ECU matches your car when you are buying a used car. The OBD2 Code scanner retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes, and pending codes.
- šćWide Vehicle CompatibilityćOBD2 scan tool is UNIVERSAL to fit all OBD2 protocols: KWP2000, ISO2000, ISO9141, J1850 VPW, J1850 PWM and CAN (Controller Area Network). Compatible with US vehicles since 1996 & European and Asian autos since 2000, OBDII vehicles, passenger cars, light trucks, SUV. Great for gasoline cars but NOT suitable for DIESEL vehicles.
- šćDisplays DTC Definitionsć Use the OBDII reader to read codes easily by just plugging in and pressing the scroll and enter button. Donāt need annoying Bluetooth, app, and computers. Don't need a battery. Wider LCD screen with white backlight shows. Support language: French German Dutch Spanish English. 28.8in / 73cm 16 pin obd2 cable allows you to sit comfortably for car diagnostic testing.
- šćSave Maintenance Cost and TimećTackle every automotive problem that might arise with this OBD2 diagnostic tool instantly. A compact, handy scan tool with manual in detail as driverās necessary backup. Start quick check of the car system and fix it. Risk-Free Customer Service, 1-year replacement in case any quality problem with the car OBD2 scanner. Just feel free to send us an email for any problem.
SaleBestseller No. 9
ANCEL AD410 Enhanced OBD II Vehicle Code Reader Automotive OBD2 Scanner Auto Check Engine Light Scan Tool (Black/Yellow)
- WIDE COMPATIBILITY - Recommended by YouTube Star Scotty Kilmer on his channel.Works on most vehicles sold in the USA with model year of 1996 or newer. Displays in English, German, French, Spanish, Finnish, Dutch, Russian, and Portuguese; Requires no battery or charger as the unit gets power directly from the OBDII Data Link Connector in the vehicle.
- CRITICAL FUNCTIONALITY - Reads quickly and erases stored emission-related codes, pending codes, and shows code definitions. Turns off the MIL (check engine light), helps in resetting the monitor before taking it to Smog, and tells you what is going on before bringing the car in for repair.
- ENHANCED OBDII DIAGNOSTICS - Supports O2 Sensor and EVAP (Evaporative Control) System Test. AD410 code scanner can be used to initiate a leak test on a vehicle's EVAP system by monitoring the integrity of the fuel tank system. The O2 Sensor Test is designed to monitor and adjust air/fuel mixture, which will help identify and troubleshoot issues related to fuel efficiency and vehicle emission.
- QVGA DISPLAY & NEW UI - AD410 code reader is a greatly enhanced upgrade from more basic diagnostic scan tools. It has a 2.4" TFT true color (262K) LCD display for clear test results showing. With an easy-to-read UI design, the user can easily access Setup, OBDII Diagnostics, I/M readiness, and DTC Look-up and Review. You don't need to read the manual to know what to do, even for a beginner.
- DIAGNOSTIC REPORTS & UPDATE - The "Review & Print" option can be used to save or print diagnostic reports as needed. ANCEL brand provides life-time free software updates for this unit to fix the latest bugs or add new parameters. Just download the software from the ANCEL website and then follow on-screen instructions to install.
Bestseller No. 10
MeiBoAll OBD2 Bluetooth ELM327, Universal Auto Engine Diagnostic Scanner, HH OBDII Scan Tool, OBDII Protocols Compliant Vehicles Fault Diagnosis Tester, Car Bus Interface Scanner for Phone and PC
- WIDE COMPATIABLE: Our OBD2 Bluetooth ELM327 scanner fit for all OBD-II protocols compliant vehicles, a good assistance tool to know your engine well
- PRACTICAL AUTO ENGINE DIAGNOSITC SCAN TOOL: Our vehicle diagnostic tool interface scanner is used to read trouble codes, clear trouble codes and detect fuel pressure and so on.
- WIRELESS BLUETOOTH SCAN TOOL: Easy to connect with a android mobile phone or PC via Bluetooth, then will well know the status of your auto engine from the app on your phone or PC. (Note: not compatible with ios phones)
- USER-FRIENDLY PROGRAM: Easy to learn, install and operate. simply extract the files into a folder on your computer and ready to go.
- COMPACT & PORTABLE: Our mini OBD2 Bluetooth Scanner is made of hardness ABS, wearable, lightweight, small size, easy to carry.
Last update on 2022-05-19 / Affiliate links / Images from Amazon Product Advertising API
Last update on 2022-05-19 / Affiliate links / Images from Amazon Product Advertising API
 with Diagnostic Trouble Code (DTC) P04DB – 2018 Ford Escape){kind=link}
 with Diagnostic Trouble Code (DTC) P04DB – 2018 Ford Escape){kind=link}