“This site contains affiliate links for which OEMDTC may be compensated” |
SSM 46908
2018 F-150 – 0 Percentage Remaining Oil Life or Change Oil Now Message After Keep Alive Memory Reset And/or Powertrain Control Module Reprogramming.
Some 2018 F-150 vehicles with less than 300 miles on the odometer may exhibit 0 percentage oil life remaining or change oil now message in the message center after PCM reprogramming or a KAM reset.
Allow PCM to completely shut down by turning ignition to off state for at least 5 minutes.
Engineering is investigating, monitor OASIS for updates.
To assist with investigation, refer to the Professional Technician Society (PTS) website and use the report a vehicle concern link att he bottom of the OASIS report.
FORD![]() | F-150 | 2018 |
SSM 46908
- MaxLife Technology prevents engine breakdown with 40% better wear protection than the industry standard
- Includes seal conditioners to reduce oil consumption and oil leaks in high mileage engines.
- Added detergents reduce sludge, corrosion, rust and deposits to help keep motors clean inside and ensure a smooth-running engine.
- Advanced friction-fighting additives help maximize performance and improve fuel efficiency.
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN
- 6X better wear protection on critical engine parts than industry standards**
- 1.3X better sludge protection than industry standards*
- 3X Stronger against viscosity breakdown than leading full synthetic^
- Protection for 10,000 miles between oil changes
- Meets or exceeds the following specifications: API SP/SN PLUS/SN | ILSAC GF-6 | Meets Ford
WSS-M2C945-B1 | Meets Ford
WSS-M2C960-A1 |
- Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
- 40% better wear protection vs. industry standards as tested in the Sequence IVB engine test
- 25% better deposit protection with superior engine cleaning detergents as tested in the GMOD engine test
- Full synthetic formula offers 24X stronger protection against engine-killing contaminants than the leading full synthetic motor oil
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN
- 3X Stronger than the leading full synthetic*
- 10X Better high stress performance**
- 20,000 miles between oil changes***
- Viscosity breakdown as measured in Kurt Orbahn test on 5W-30 grade
- Or one year, whichever comes first
- The first motor oil to actively restore engine cleanliness and protect against future damage
- With continuous use, Valvoline Active Clean Technology removes up to 100% of deposits while Liqui-Shield Technology helps prevent future deposits (*with regular oil changes. In Adapted Sequence IIIH Testing: Piston Deposit Removal)
- 79% stronger anti-wear protection than industry standards (vs. GF-6 qualified oil)
- Minimizes friction between metal surfaces in your engine to help improve fuel economy
- The best motor oil for any age vehicle, from your new car’s first oil change to high-mileage vehicles
- Mobil 1 advanced full synthetic motor oil 5W-20 helps to protect your engine from the five factors that can damage engines over time
- Helps to protect critical engine parts for up to 10,000 miles between oil changes*, controlling oxidation to prevent oil breakdown and maintaining excellent viscosity
- Meets ILSAC GF-6 standards to help provide low-speed pre-ignition (LSPI) and timing chain wear protection while keeping your engine clean and helping to improve your fuel economy
- Helps extend engine life by working to prevent damaging deposits and sludge buildup
- Provides excellent internal engine heat protection (up to 500 degrees F) and low temperature protection (to -30 degrees F)
- Phosphorus Replacement Technology to help extend the life of the emission system
- Reduces leaks, oil burnoff and power robbing deposits
- 15,000 miles between oil changes*
- Meets or exceeds the following specifications: API SP/SN PLUS/SN/SM ILSAC GF-6 | Meets engine test requirements of Chrysler MS 6395 | Meets Ford
WSS-M2C945-B1 | Meets Ford
WSS-M2C960-A1
- Or one year, whichever comes first
- Advanced protection against the four main causes of engine breakdown: wear friction heat and deposits
- Full synthetic 0W-20 formula offers 24X stronger protection against engine-killing contaminants than the leading full synthetic motor oil
- 40% better wear protection vs. industry standards as tested in the Sequence IVB engine test
- 25% better deposit protection with superior engine cleaning detergents as tested in the GMOD engine test
- Meets or exceeds all requirements of ILSAC GF-6A, API SP, API SN with SN Plus, API SN, GM dexos 1 Gen 3
- High Mileage 5W-20 synthetic blend engine oil specially formulated to help stop leaks and reduce oil consumption in worn engines
- Recommended for vehicles with more than 75,000 miles
- Helps prevent sludge and other damaging deposits
- Proven wear protection for engine parts
- Suitable for modern turbocharged engines where low-speed pre-ignition protection is required
Last update on 2025-07-07 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.