| “This site contains affiliate links for which OEMDTC may be compensated” |
2013-2015 C-MAX – Illuminated Malfunction Indicator Lamp (MIL) – Diagnostic Trouble Code (DTC) U1030 In BECM – Built On Or Before 21-May-2015
Some 2013-2015 C-MAX vehicles may exhibit an illuminated MIL with DTC U1030 after module reprogramming is performed on the powertrain control module (PCM) and built on or before 21-May-2015.
ID vehicle and open a new Integrated Diagnostic System (IDS) vehicle session.
Select Module Programming ⇒ As-built ⇒ battery energy control module (BECM).
When IDS prompts to obtain module part numbers, select Yes.
Once data has downloaded, perform PMI on the BECM and confirm the U1030 clears after on-demand self testing the BECM.
Service Information & Reprogramming
Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.
Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:
- Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
- Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)
In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.
J2534 Device 
using Ford Module Programming (FMP) can Reprogram and Configure most Modules.
Latest Calibration Information
Module Build Data (As-Built)
Use VIN to obtain As-Built data
