| “This site contains affiliate links for which OEMDTC may be compensated” |
Data Corrupt Message When Attempting Module Programming Using IDS
Vehicles requiring Module Programming may result in a ‘Data Corrupt’ or ‘File Unavailable’ message any time the Integrated Diagnostic Software (IDS) requires the use of As-Built data.
An error may also be encountered when attempting to review the As-built data page on PTS.
The As built team is working diligently to resolve the Data error.
Monitor OASIS for updated information.
If you encounter this error in the interim, ensure you are using appropriate procedure from the Online Workshop Manual as part of the vehicle repair process, as in most cases As-built data is not necessary or required for replacement of module if the original module is available.
Service Information & Reprogramming
Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford
, Lincoln and Mercury vehicles.
Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:
- Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
- Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)
In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.
J2534 Device 
using Ford Module Programming (FMP) can Reprogram and Configure most Modules.
Latest Calibration Information
Module Build Data (As-Built)
Use VIN to obtain As-Built data
