| “This site contains affiliate links for which OEMDTC may be compensated” |
SSM 46491 – 2017 Fusion/MKZ – Front Windows Bounce Back When Using One-Touch Up Feature – Built On Or After 01-Nov-2016
Some 2017 Fusion and MKZ vehicles built on or after 01-Nov-2016 may exhibit a front window that bounces back and does not close when using the one-touch up feature.
Reprogram the driver door module (DDM) to the latest calibration using the Integrated Diagnostic System (IDS) version 104.04 or higher.
Make sure you are connected to the internet when entering module programming to obtain the latest updates.
Calibration files may also be obtained at www.motorcraftservice.com.
Loading...
Reload document 
Open in new tab
Service Information & Reprogramming
Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford
, Lincoln and Mercury vehicles.
Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:
- Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
- Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)
In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.
J2534 Device 
using Ford Module Programming (FMP) can Reprogram and Configure most Modules.
Latest Calibration Information
Module Build Data (As-Built)
Use VIN to obtain As-Built data
