| “This site contains affiliate links for which OEMDTC may be compensated” |
| TECHNICAL SERVICE BULLETIN Floor Console Cup Holder Door – Unable To Operate |
17-2208 16 October 2017 |
This bulletin supersedes 16-0160. Reason for update: New Part/Procedure For Same Condition
Model:
Summary
This article supersedes TSB 16-0160 to update the Service Labor Time Standards.
Issue: Some 2017 Continental vehicles may exhibit a floor console cup holder door that does not operate.
Action: Follow the Service Procedure steps to correct the condition.
Parts
| Part Number | Description | Quantity |
| 54044D90 | Panel Console Top – Refer To The Parts Catalog | 1 |
Warranty Status: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.
Labor Times
| Description | Operation No. | Time |
| 2017 Continental: Visually Inspect And Replace The Floor Console Upper Section (Do Not Use With Any Other Labor Operations) | 172208A | 0.8 |
| 2017 Continental: Visually Inspect And Follow The Service Procedure To Correct Binding (Do Not Use With Any Other Labor Operations) | 172208B | 0.3 |
| 2017 Continental: Visually Inspect And Follow The Service Procedure To Correct Binding Damage Found Replace The Floor Console Upper Section (Do Not Use With Any Other Labor Operations) | 172208C | 0.9 |
Repair/Claim Coding
| Causal Part: | 54044D90 |
| Condition Code: | 42 |
Service Procedure
1. Visually inspect the floor console cup holder door. Is it damaged or scratched?
(1). Yes – proceed to Step 9.
(2). No – proceed to Step 2.
2. Release the right side and left side floor console side trim panel clips. (Figure 1)
Figure 1
3. Release the retaining clips for the rear of the floor console upper section, using a plastic trim tool and move the rear of the console upper section up.
4. Inspect the louver right and left side tracks for the louver out of the track. (Figure 2)
Figure 2
5. Flex the right or left side of the louver track structure to move the louver back into the track. (Figure 3)
Figure 3
6. Install the floor console rear upper section clips, the right and left side trim panel clips.
7. Operate the floor console cup holder door to verify proper function of the door. Does the floor console cup holder door operate properly?
(1). Yes – proceed to Step 8.
(2). No – proceed to Step 9.
8. Inspect floor console cup holder door for damage or scratches. Does the floor console cup holder door have damage or scratches?
(1). Yes – proceed to Step 9.
(2). No – repair is complete.
9. Replace the floor console upper section. Refer to Workshop Manual (WSM) Section 415-00. The removal and installation of Compact Disc Player provides the steps necessary for floor console upper section removal and installation. The repair is complete.
https://static.nhtsa.gov/odi/tsbs/2016/SB-10094577-2532.pdf
Loading...
Reload document 
Open in new tab
