| “This site contains affiliate links for which OEMDTC may be compensated” |
2016 Focus Electric/C-Max Energi – SYNC3- Unable To Change The Charge Port Light Ring Settings
Some 2016 Focus Battery Electric Vehicle (BEV) and C-Max Energi Plug-in Hybrid Vehicles (PHEV) equipped with SYNC3 may be unable to change the settings for the charge port light ring under vehicle settings function.
This may be due to the gateway module (GWM) configuration, defaulting to always on.
Reprogram the GWM to the latest level using IDS release 103.05A or higher.
Make sure you are connected to the internet when entering module programming to obtain the latest updates.
Service Information & Reprogramming
Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford
, Lincoln and Mercury vehicles.
Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:
- Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
- Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)
In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.
J2534 Device 
using Ford Module Programming (FMP) can Reprogram and Configure most Modules.
Latest Calibration Information
Module Build Data (As-Built)
Use VIN to obtain As-Built data
