SSM 46317 – 2017 F-150 – Satellite Radio – No Sound From Speakers And Acquiring Signal Message With No Obstructions – Built On Or Before 27-Sep-2016
Some 2017 F-150 vehicles equipped with satellite radio may exhibit an Acquiring Signal message displayed for greater than 5 minutes and no sound from the speakers when satellite radio is selected.
This concern occurs when there are no obstructions to the satellite radio antenna.
Reprogram the Audio Control Module (ACM) using Integrated Diagnostic System (IDS) release 103.04 or higher.
Make sure you are connected to the internet when entering module programming to obtain the latest updates.
For claiming, use causal part 18C869 and applicable labor operations in section 10 of the Service Labor Time Standards (SLTS) manual.
APPLICABLE VEHICLES
2017 TRUCK: FC P552 F150
https://static.nhtsa.gov/odi/tsbs/2017/SB-10095167-2532.pdf
Loading...
Reload document
Open in new tab
Service Information & Reprogramming
Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.
Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:
- Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
- Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)
In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.
J2534 Device 
using Ford Module Programming (FMP) can Reprogram and Configure most Modules.
Latest Calibration Information
Module Build Data (As-Built)
Use VIN to obtain As-Built data
