| “This site contains affiliate links for which OEMDTC may be compensated” |
2016 Edge – 4″ Audio Display – CD Player Inoperative Or Will Not Eject, Park Aid Obstacle Indicator Missing – Built On 17-Aug-2016 And Through 7-Oct-2016
Some 2016 Edge vehicles equipped with a 4 inch audio display and built on 17-Aug-2016 and through 7-Oct-2016 may exhibit a CD Player that is inoperative, CD that will not eject, CD button that is inoperative, park aid obstacle distance indicator (if equipped) missing from the rear view camera screen, and/or a 4 inch audio display screen that will continuously reboot the Ford logo.
To correct the condition, update the front control display interface module (FCDIM) as-built configuration using IDS version 102.04 or higher.
Make sure you are connected to the internet when downloading the updated as-built data.
Service Information & Reprogramming
Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.
Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:
- Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
- Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)
In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.
J2534 Device 
using Ford Module Programming (FMP) can Reprogram and Configure most Modules.
Latest Calibration Information
Module Build Data (As-Built)
Use VIN to obtain As-Built data
