| “This site contains affiliate links for which OEMDTC may be compensated” |
Multiple Vehicles – Rotunda Torque Converter Flush Tool 307-732 Revised Installation Instruction To Prevent Fluid Leak During Use
The Rotunda torque converter flush tool 307-732 may leak when in use due to an improperly aligned gasket.
It is recommended that a 2-3/4” hose clamp be added to the outer diameter of the flush tool to maintain alignment of the rubber gasket during use.
The tool should also be visibly centered in the torque converter to ensure a proper seal to the torque converter hub.
This is especially helpful with smaller torque converters such as those used with 6F15 and 6F35 transmission.
For additional information on completing a torque converter flush, refer to Workshop Manual (WSM) Section 307-01.
