| “This site contains affiliate links for which OEMDTC may be compensated” |
2016 MKX – Auto Power Folding Mirrors Cannot Be Disabled – Built On Or Before 11/12/2015
Some 2016 MKX vehicles built on or before 11/12/2015 may not have the ability to enable/disable the auto folding mirrors in the vehicle settings menu of the instrument cluster.
To correct the condition use IDS version 99.02 or higher.
Select Module Programming – Programmable Parameters – Power Mirrors – Enable.
Once the auto folding mirrors are enabled using IDS, the selection to enable/disable the auto folding mirrors will display in the vehicle settings menu of the instrument cluster.
If the auto folding mirrors are disabled in the vehicle settings menu of the instrument cluster, the Lincoln
welcome mat will not function.
This is normal operation.
Service Information & Reprogramming
Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.
Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:
- Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
- Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)
In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.
J2534 Device 
using Ford Module Programming (FMP) can Reprogram and Configure most Modules.
Latest Calibration Information
Module Build Data (As-Built)
Use VIN to obtain As-Built data
