|“This site contains affiliate links for which OEMDTC may be compensated”
2016 MKX – Front Control Interface Module (FCIM) Diagnostic Trouble Code (DTC) B10B8
Some 2016 MKX vehicles may have DTC B10B8:63 set in the FCIM.
DTC B10B8:63 will not cause any observable customer symptoms or malfunction indicator lamps (MIL) to illuminate.
Disregard DTC B10B8:63.
Do not replace the FCIM for DTC B10B8:63.
Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.
Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:
- Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
- Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)
In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.
J2534 Device using Ford Module Programming (FMP) can Reprogram and Configure most Modules.
Latest Calibration Information
Module Build Data (As-Built)
Use VIN to obtain As-Built data