| “This site contains affiliate links for which OEMDTC may be compensated” |
Nov 12 2015 2241 – 2016 MKX Equipped With A Harman Revel Or Harman Revel Ultima Audio System – Intermittent Battery Draw – Built On Or Before 11/3/2015
Some 2016 MKX vehicles equipped with a Harman Revel or Harman Revel Ultima Audio System built on or before 11/3/2015, may exhibit a 12-volt battery that is unable to maintain a charge or becomes discharged.
To correct the concern, reprogram the Audio Digital Signal Processing (DSP) module to the latest calibration using IDS version 98.01 and higher.
Make sure you are connected to the internet when entering module programming to obtain the latest calibration. Calibration files may also be obtained at www.motorcraftservice.com.
Service Information & Reprogramming
Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.
Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:
- Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
- Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)
In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.
J2534 Device 
using Ford Module Programming (FMP) can Reprogram and Configure most Modules.
Latest Calibration Information
Module Build Data (As-Built)
Use VIN to obtain As-Built data
