“This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10244869
Manufacturer Communication Number: SSM 52007
Summary
Some 2024 Mustang vehicles equipped with a 2.3L EcoBoost engine and built on or before 12-Oct-2023 may exhibit an inoperative air conditioning system (A/C). This may be due to a refrigerant leak coming from the receiver/drier upper cap on the condenser. If a refrigerant leak is suspected, inspect the receiver/drier upper cap on the condenser for a refrigerant leak and repair as necessary using causal part number 19712 and applicable labor operations in Section 10 of the Service Labor Time Standards (SLTS) Manual. If the receiver/drier upper cap is not leaking, continue with normal diagnostics found in the Workshop Manual, Section 412-00.
1 Affected Product
Vehicle
1 Associated Document
Manufacturer Communications
SSM 52007 2024 Mustang -2.3L EcoBoost – Inoperative A/C System With OrWithout Diagnostic Trouble Code (DTC) P0534 – Built On Or Before 12-Oct-2023
NHTSA ID Number: 10244868
Manufacturer Communication Number: SSM 52006
Summary
Some 2024 Mustang vehicles may exhibit an inoperative air conditioning (a/c) system. Diagnostic trouble codes (DTCs) B3A1B and/or P0534 may be set within the powertrain control module (PCM). This condition is currently under investigation by engineering. For vehicles that meet this criteria, submit a Report a Vehicle Concern (if no help is needed) or a submit a Technical Support Request (if help is needed). In the report, include as much information as possible about the vehicle symptom including high and low side a/c system pressures, a/c pressure transducer PID readings, the amount of refrigerant that was recovered from the vehicle (only if refrigerant recovery was required), and anything else found during the diagnosis that would be helpful to the investigation. Attach screen shots, images and/or videos that will help show what was found. As a reminder, the Technician Awards Program is active and will continue through Nov 18, 2023. With this program, every Report a Vehicle Concern submitted by a technician or shop foreman may receive additional compensation received through obtaining AwardHQ Points.
1 Associated Document
Manufacturer Communications
SSM 52006 – 2024 Mustang – Inoperative A/C System
- 3 Cans of R1234YF Geniune Honeywell Refrigerant Freon Cans
- Free Guage
- Perfect for recharging AC in the summer
- Fit type: Universal
- Part number: R134YFTOK
- Authentic HFO-R1234YF - This product should only be used in R1234YF systems. Please check the service sticker on your system or vehicle to identify the system type. This kit also includes a ZeroR service label for easy identification of the servce date and working pressures.
- 8 oz Cans – Cans are 8 oz net weight. Gas is measured in weight when compressed. Please don’t shake the can and think that it doesn’t feel full. Rest assured that it is. Different gases have different weights when compressed.
- Reverse Threads - These R1234YF cans are different from the older, more traditional, cans of refrigerant such as R134a. They have left hand, or reverse threads. This means you will need to turn the can counter clockwise to insert into your charging hose can tap.
- PERFORMANCE BOOSTER CHARGE KIT - ZeroR is a performance booster for use with R1234YF AC systems. You can use as many cans in your system as you wish, while being sure not to overfill the system with the included can tap with gauge.
- KIT CONTENTS - The can tap is 24 in length with a gauge metered for R1234YF systems. Standard R1234YF can taps will not work on ZeroR branded R1234YF cans, because our cans have a unique thread. 3 cans of ZeroR Permafrost in 4oz cans.
- NOT A Full Refrigerant - This product is a support fluid performance booster. It is a combination of two ZeroR products in one. The first part removes moisture (moisture can cause damage and reduced performance in the system), and the second part reduces friction (friction can reduce refrigerant flow and cause compressor damage)
- 24 in Charging Hose with Can Tap & Gauge - New longer 24 inch connection hose accomodates those harder to reach low side ports that were previously difficult to reach with a shorter 12 inch hose.
- 10 MINUTE INSTALL - Easy instructions are included and will take as little as 10 minutes to complete.
- This kit contains a 24in. R1234YF HD Brass Can Tap with Gauge & 2 cans of R1234YF. 1 can should fill the majority of empty systems.
- 24″ Heavy Duty Brass Can Tap & Gauge – New longer 24″ connection hose accommodates those harder to reach low side ports that were previously difficult to reach with a shorter 12″ hose. The can tap has reverse, “left-hand” threads, that matches the threads on the R1234YF can.
- Authentic R1234YF – This product is authentic HFO-1234yf and is purchased directly from an authorized supplier in the USA. This product should only be used in R1234YF systems. Please check the service sticker on your system to identify it's type.
- 8OZ CANS – Cans are 8oz net weight. Gas is measured in weight when compressed. Please don’t shake the can and think that it doesn’t feel full. It is, we promise. Different gases have different weights when compressed.
- Genuine R1234YF – This product is genuine and is purchased from a dealer in the USA. This product can only be used in R1234YF system. Please check the service sticker on your system to identify the system type. Installtion tools not included.
- 8oz Can – Cans are 8oz net weight and have reverse, or "left-hand" threads. Gas is measured in weight when compressed. Please don’t shake the can and think that it doesn’t feel full. Different gases have different weights when compressed. All cans are filled to the maximum pressure as allowed by the D.O.T.
- Returns - By law, products rated as hazardous materials (all compressed gasses) require a hazmat training & a license to ship. While this product may be returned for a refund, neither Amazon nor DIY Parts may provide a prepaid return shipping label due to liability reasons. Customers must assume all risk and cost for return shipping if they choose to return the products without proper certification. We apologize for any inconvenience this legal requirement may cause
- Legal Disclaimer: R1234YF Refrigerant for MVAC use in a 8oz Self-Sealing Container. Customer is responsible for complying with all federal, state and local laws when purchasing, handling, storing and installing refrigerants. DiY Parts is not liable for customer’s failure to comply with any legal requirements. This product is flammable, follow all labeled precautions when handling. This product can only ship ground services.
- R1234YF
- NOT a Refrigerant
- Moister Eliminator
- AC Booster
- One A/C Pro Auto AC Recharge Gauge and Hose Dispenser, R1234yf
- Extra large easy-to-read gauge for accurate charging
- 24" AC charging hose is long enough to reach difficult ports
- Push-on quick-connect coupler lets you easily connect the refrigerant hose
- Trigger dispenser offers easy use for effortless recharging
- Dye charge Made in the USA 3 cans of Dye charge and brass hose
- This kit contains a 24in. R1234YF HD Brass Can Tap with Gauge & 1 can of R1234YF. 1 can should fill the majority of empty systems.
- 24″ Heavy Duty Brass Can Tap & Gauge – New longer 24″ connection hose accommodates those harder to reach low side ports that were previously difficult to reach with a shorter 12″ hose. The can tap has reverse, “left-hand” threads, that matches the threads on the R1234YF can.
- Authentic R1234YF – This product is authentic HFO-1234yf and is purchased directly from an authorized supplier in the USA. This product should only be used in R1234YF systems. Please check the service sticker on your system to identify it's type.
- 8OZ CANS – Cans are 8oz net weight. Gas is measured in weight when compressed. Please don’t shake the can and think “this doesn’t feel full”. It is, we promise. Different gases have different weights when compressed.
Last update on 2025-04-19 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.