| “This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10232482
Manufacturer Communication Number: SSM 51385
Summary
Some 2019-2023 Edge/Nautilus vehicles equipped with a 2.0L engine may exhibit a repeat block heater failure. This may be caused by air in the engine cooling system. The WSM replacement procedure has been updated to include the Engine Cooling System Draining, Vacuum Filling and Bleeding procedure found in Section 303-03A Engine Cooling – 2.0L EcoBoost (184kW/250PS) MI4, General Procedures as the final step. The block heater should not be tested unless all the air has been removed from the engine cooling system following this procedure.
13 Affected Products
Vehicles
1 Associated Document
Manufacturer Communications
SSM 51385
2019-2023 Edge/Nautilus – 2.0L – Repeat Block Heater Failure – Updated Procedure In The Workshop Manual (WSM)
MC-10232482-0001.pdf 100.979KB
Loading...
Reload document 
Open in new tab
SaleBestseller No. 1
Bestseller No. 2
DVPARTS 120V Block Heater Cord Cordset 251919 Compatible with Ford 7.3 6.0 6.4 6.7 L Powerstroke Diesel F350 250 F250 Fits Heavy Duty Immersion Heaters and Engine Block Heaters
- Part Number: 251919, 6B018, 251919C, 68409910AB, 28216, 28216X
- Compatible with 1989-2018 Dodge Ram Cummins Diesel 5.9, 6.7 L
- Compatible with Ford
7.3 6.0 6.4 6.7 L Powerstroke Diesel F350 250 - Compatible with 1989-Current Dodge Cummins 5.9L Diesel Engines
- Compatible with 2007-Current Dodge Cummins 6.7L Diesel Engines
Bestseller No. 3
Engine Block Heater Assembly For 1995-2003 F-ord F-250 F-350 7.3L 445Cu In V8 Powerstroke Diesel - Replacement F7TZ-6A051-AA
- 【Adaptable Model】Compatible with 1995-2002 F-ord / Lin-coln / Mer-cury model 8 Cylinder V8-7.3L Engines.
- 【Great Performance】Accelerate engine startup at cold weather conditions, enhance the engine' working efficiency and extend its service life.
- 【Product Feature】Volts: 120 | Watts: 1000 | Plug Type: 120 Volt | Heater size: 3/4" NPT
- 【Manufacturing Standards】Partslink Number : F7TZ-6A051-AA
- 【Easy Installation】Direct Bolt-on Replacement without Modification.
Bestseller No. 4
Lisnhlin F7TZ-6A051-AA Diesel Engine Block Heater Replacement for Ford F-250 F-350 7.3L for Powerstroke Diesel 1995-2003 with Cable Cord 120v 1000w 3/4" NPT
- Compatibility: Replacement for Ford for F-250 for F-350 7.3L for Powerstroke Diesel 1995-2003. Replacement for Ford 7.3L Diesel engines in any vehicle, Pickup Trucks, Vans, Towtrucks all 1995-2003
- Replace Part Number: Replace F7TZ-6A051-AA. Please carefully check the model/part number/year to ensure it is suitable for your car
- Durability: Manufactured from quality materials under strict quality control to ensure longer service life. Able to withstand harsh environments and provide long-lasting and stable heating effect
- Efficient Heating: The heater can help preheat, effectively shorten the start-up time in cold weather, reduce equipment wear and tear, improve the starting efficiency and running performance
- Easy Installation: The replacement process is quick and easy, no need to modify the original system, direct replacement, saving time and installation costs
SaleBestseller No. 5
Engine Block Heater Compatible with 1995-2003 Fo-rd F250 F350 7.3 Diesel Engines, 3/4" NPT Thread, 120 Volts, 1000 Watts-Engine Block Heater Element & Power Cord Kit
- Fitment: This Engine Block Heater will only fit 1995 and newer 7.3 engines
- Volts: 120 | Watts: 1000 | Plug Type: 120 Volt | Heater size: 3/4" NPT
- Installation Information: Replaces 3/4" threaded plug in oil cooler
- Features: Ensure quick winter starts and reduce engine wear
- Package Includes: Engine Block Heater Element and 6 feet Power Cord
Bestseller No. 6
VANORM Replacement Cordset Cord for Heavy Duty Immersion Heaters and Engine Block Heaters 6-feet 120 Volts, Compatible with Dodge Ram Cummins Diesel and Ford F250 350 - Block Heater Cord
- Engineered and tested to withstand the extremes of temperature, moisture and vibration
- Single heavy duty cord with male plug and silicone female connector
- Works on heavy duty heaters
- 120 volts; 6 ft. (1. 8m); 16 gauge; Plug Type: 120 Volt, 15 Amp
- Wire type: 16/3 HPN; silicone connector: right angle; pin distance: 0. 360", pin diameter: 0. 138"
Bestseller No. 7
FOMIUZY 6.0 6.4 Powerstroke Engine Block Heater Element With Cord Compatible With Ford F250 F350 F450 F550 Super Duty E150 E250 E350 E450 Econoline Van Excursion Diesel Replace 3C3Z-6A051-AA 6A051
- 【Direct Replacement】: As the cold weather comes, the diesel in the engine tends to solidify at 46F or below 40F Fahrenheit, making it impossible to start, it will be very troublesome, it is recommended that you buy this heater element to solve the problem.The heater kit meets or exceeds the oem standard, has passed the factory test, and is perfectly matched with the original car, and can be installed directly.
- 【High Quality】:Using enhanced high-quality material, high temperature resistance, corrosion resistance, strong thermal conductivity and long service life. With threaded design, it can go directly into the engine for quick heating, allowing the car to start quickly, saving unnecessary fuel consumption and your precious time. 1000W 120V power design can keep your engine warm in a safe condition, providing you with long-term stability and excellent performance
- 【Fit For】: For 6.0L & 6.4L Diesel Engine Only 2003-2010 Ford F250 350 450 550 Super Duty | 2004-2010 Ford E150 E250 E350 E450 Econoline Van | 2003-2005 Ford Excursion
- 【OE#】: 3C3Z6A051AA ; 3C3Z-6A051-AA ; 6A051 ; 6B018 ; 251919
- 【Buy With Confidence】: Once there is a problem with the product, contact us here to solve it perfectly for you, without worrying about quality problems
Bestseller No. 8
Bestseller No. 9
Replace 3500043 Engine Block Heater, Engine Block Immersion Heater Fits for Ford 7.3L Lincoln Mercury Detroit Diesel International Caterpillar Hino Mack Nissan, 3/4" NPT Thread 120V 1000W
- Wide Compatibility: Fits for Ford Mercury Lincoln International Caterpillar Detroit Diesel Hino Mack Nissan, replace 3500043, meets various vehicle needs
- Durable Purple Copper Material: Made of excellent red copper, it has stable resistance, excellent thermal and electrical conductivity. The zinc threaded interface ensures the durability of the heater in long-term use, providing stable heating performance in various weather conditions
- Quick Heating: The heater uses a voltage of 120V and a power of 1000W, which can quickly heat the engine coolant in cold environments, achieve quick start, and reduce engine wear
- Easy to Install: Equipped with a 3/4 inch NPT threaded galvanized steel connector, copper heating tube, and a 6-inch power adapter cable, the threaded design allows it to be directly installed on the engine block, making installation simple and convenient
- Extend Service Life: The heater effectively reduces the cold start wear of the engine in cold environments, extend the service life of the engine, especially suitable for low-temperature areas and winter operations
Last update on 2025-04-19 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.