| “This site contains affiliate links for which OEMDTC may be compensated” |
2015 Transit Tire Pressure Sensor Monitoring System (TPMS) Programming Concerns And/Or DTC B1182 Following Body Control Module (BCM) Replacement
To avoid 2015 Transit Tire Pressure Sensor Monitoring System (TPMS) programming concerns and/or DTC B1182 following Body Control Module (BCM) replacement, utilize release 96.02 or higher.
Make sure you are connected to the internet to obtain the latest updates.
Program the TPMS sensors using TPMS Activation Tool 204-D081.
Service Information & Reprogramming
Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.
Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:
- Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
- Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)
In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.
J2534 Device 
using Ford Module Programming (FMP) can Reprogram and Configure most Modules.
Latest Calibration Information
Module Build Data (As-Built)
Use VIN to obtain As-Built data
