Rear Park Aid Not Over-Riding Audio – 2015 Ford F-150

“This site contains affiliate links for which OEMDTC may be compensated”

2015 F-150 – Rear Park Aid Not Over-Riding Audio

2015 F-150 vehicles equipped with the 8″ touchscreen can exhibit a customer concern of the rear park aid not overriding the audio.

 

To correct this concern reflash the Digital Signal Processor module (DSP) to the latest calibration using release 94.05 or higher.

Calibration files may also be obtained at www.motorcraftservice.com

 


 

Service Information & Reprogramming

Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.

Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:

  • Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
  • Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)

In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.

J2534 Device Rear Park Aid Not Over-Riding Audio - 2015 Ford F-150 | small light Rear Park Aid Not Over-Riding Audio - 2015 Ford F-150 | small light Rear Park Aid Not Over-Riding Audio - 2015 Ford F-150 | small light Rear Park Aid Not Over-Riding Audio - 2015 Ford F-150 | small light using Ford Module Programming (FMP) can Reprogram and Configure most Modules.

Latest Calibration Information

Module Build Data (As-Built)
Use VIN to obtain As-Built data

www.motorcraftservice.com

 

Leave a Comment

Share to...