Illuminated MIL with DTC P0130 – 2009-2011 Ford E-150 E-250 E-350 E-450

“This site contains affiliate links for which OEMDTC may be compensated”
TSB 14-0022 4.6L/5.4L – MALFUNCTION INDICATOR LAMP (MIL) ON WITH DIAGNOSTIC TROUBLE CODES (DTCS) P0130 OR P0150

 

FORD: 2009-2011 E-150, E-250, E-350, E-450

 

This article supersedes TSB 12-06-13 to update the Title, Issue Statement and Service Procedure.

ISSUE:

Some 2009-2011 E-Series vehicles equipped with a 4.6L or 5.4L engine may exhibit an illuminated MIL with DTC P0130 (Oxygen Sensor Circuit Bank 1, Sensor 1) or P0150 (Oxygen Sensor Circuit Bank 2, Sensor 1).

 

ACTION:

Follow the Service Procedure steps to correct the condition.

SERVICE PROCEDURE

  1. Retrieve all DTCs from the Powertrain Control Module (PCM). Are DTCs P0130 or P0150 present?
    1. Yes – proceed to Step 2.
    1. No – this article does not apply. Refer to Workshop Manual (WSM) and Powertrain Control/Emissions Diagnosis (PC/ED) manual for normal diagnostics.
  1. NOTE   PLEASE ADVISE THE CUSTOMER THAT THIS VEHICLE IS EQUIPPED WITH AN ADAPTIVE TRANSMISSION SHIFT STRATEGY WHICH ALLOWS THE VEHICLE’S COMPUTER TO LEARN THE TRANSMISSION’S UNIQUE PARAMETERS AND IMPROVE SHIFT QUALITY. WHEN THE ADAPTIVE STRATEGY IS RESET, THE COMPUTER WILL BEGIN A RE-LEARNING PROCESS. THIS RE-LEARNING PROCESS MAY RESULT IN FIRMER THAN NORMAL UPSHIFTS AND DOWNSHIFTS FOR SEVERAL DAYS.

Reprogram the PCM to the latest calibration using IDS or Ford J2534 release 73.02 and higher.

Calibration files may also be obtained at www.motorcraft.com.

 

OPERATION DESCRIPTION TIME
140022A 2009-2011 Econoline 4.6L And 5.4L Engine: Check DTCs, Reprogram The PCM And Clear Codes (Do Not Use With Any Other Labor Operations) 0.3 Hr.

 

WARRANTY STATUS

Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage.
Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool.

 

DEALER CODING

BASIC PART NO. CONDITION CODE
RECALEM 04

 


 

Service Information & Reprogramming

Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.

Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:

  • Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
  • Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)

In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.

J2534 Device Illuminated MIL with DTC P0130 - 2009-2011 Ford E-150 E-250 E-350 E-450 | small light Illuminated MIL with DTC P0130 - 2009-2011 Ford E-150 E-250 E-350 E-450 | small light Illuminated MIL with DTC P0130 - 2009-2011 Ford E-150 E-250 E-350 E-450 | small light Illuminated MIL with DTC P0130 - 2009-2011 Ford E-150 E-250 E-350 E-450 | small light using Ford Module Programming (FMP) can Reprogram and Configure most Modules.

Latest Calibration Information

Module Build Data (As-Built)
Use VIN to obtain As-Built data

www.motorcraftservice.com

 

Leave a Comment

Share to...