Rear Door Latch Corrosion – 2000-2005 Ford Focus

NHTSA ID Number: 10205032

Manufacturer Communication Number: TSB160067

Summary

Safety recall 05S27 – Rear door latch corrosion – requests for recall service action – built on or before 01/26/2005

 


2005 Ford Focus
2005 Ford Focus

 


FORDeBay logo:
2000-2005 Focus

 

This article supersedes TSB 14-0162 to provide updated contact direction to the Special Service Support Center.

 

ISSUE

For 2000-2005 Focus vehicles built on or before 1/26/2005 Safety Recall 05S27 has been issued for vehicles that are operated in high corrosion areas for an extended period, where the rear door latches may experience corrosion in the pawl pivot area preventing proper engagement of the pawl into the catch. Initially, customers may experience difficulty closing the rear door that may eventually progress to a point where the rear door may not latch properly. If not latched properly, the door may open while driving.

 

 

ACTION

Follow the Service Procedure steps to correct the condition.

 

SERVICE PROCEDURE

  1. For 2000-2005 Focus vehicles built on or before 1/26/2005 that are not covered under Safety Recall 05S27 but exhibit rear door latch corrosion, dealers can submit a Non-Involved Vehicle type contact to the Special Service Support Center (SSSC) from the PTS website to request recall service action. Dealers should provide pictures of the VIN, Odometer and a picture of the rear door latches showing the corrosion. Dealers located in U.S. Federalized Territories (America Samoa, Guam, Northern Mariana Islands, Puerto Rico and U.S. Virgin Islands) must contact expcso@fordeBay logo.com to request recall service action.
  2. If approved, follow Safety Recall 05S27. Dealers are to inspect, clean and lube the rear door latches, install a lower rocker seal to the rear doors and install a label to the rear doors on all the affected vehicles. As a courtesy maintenance, dealers will also lubricate the front door latches even though the front door latches are not part of this recall. If a rear door latch does not pass the prescribed inspection procedure as outlined in Attachment III of Safety Recall 05S27, it will be replaced.

 

OTHER APPLICABLE ARTICLES

05S27

NHTSA

05V030

 


6 Affected Products

Vehicle

MAKEMODELYEAR
FORDeBay logoFOCUS2000-2005

 


1 Associated Document

Manufacturer Communications

TSB 16-0067

https://www.nhtsa.gov/recalls?nhtsaId=10205032

MC-10205032-9999.pdf 96.426KB

 


NHTSA ID Number: 10183768

Manufacturer Communication Number: 16-0067

Summary

For 2000-2005 Focus vehicles built on or before 1/26/2005 Safety Recall 05S27 has been issued for vehicles that are operated in high corrosion areas for an extended period, where the rear door latches may experience corrosion in the pawl pivot area preventing proper engagement of the pawl into the catch. Initially, customers may experience difficulty closing the rear door that may eventually progress to a point where the rear door may not latch properly. If not latched properly, the door may open while driving.

 

1 Associated Document

Manufacturer Communications

TSB 16-0067

https://www.nhtsa.gov/recalls?nhtsaId=10183768

MC-10183768-9999.pdf 96.426KB

 


NHTSA ID Number: 10058099

Manufacturer Communication Number: TSB-14-0162

Summary

FORDeBay logo: REAR DOOR LATCHES ARE EXPERIENCING CORROSION IN PAWL PIVOT AREA THAT PREVENT PROPER ENGAGEMENT OF PAWL INTO CATCH, WHEN OPERATED IN AREAS CAUSING HIGH CORROSION. MODEL 2000-05 FOCUS. *PE

 

1 Associated Document

Service Bulletin Document

TSB 14-0162

https://www.nhtsa.gov/recalls?nhtsaId=10058099

SB-10058099-9840.pdf 224.96KB

 


 

Bestseller No. 1
CorrosionX Rust Inhibitor, Industrial-Strength Dielectric Corrosion Prevention, Lubricant & Penetrant for Marine, Automotive, Electronics & RV Use, Protects Bolts, Cables, Engines, Parts, 16oz Aerosol
  • BUILDS A LASTING SHIELD AGAINST RUST AND CORROSION: Forms a moisture-blocking dielectric barrier that molecularly bonds to metal surfaces and subsurfaces; perfect for protecting trailers, marine gear, or tools stored in salt-heavy, humid environments.
  • DELIVERS LONG-LASTING, MARINE-GRADE LUBRICATION: Clings to metal like a magnet and resists pressure, friction, and washout; ideal for lubricating locks, hinges, cable pulleys, and marine components exposed to heavy loads, rain, salt spray, tidal moisture, or constant vibration on boats and coastal equipment.
  • FREES RUSTED PARTS WITH DEEP PENETRATION: Industrial-strength penetrating oil releases corrosion on frozen bolts, marine fittings, and seized engine parts; penetrates to free up when other products fail in salty, humid, or wet environments on boats, farm tools, or machinery.
  • PROTECTS ELECTRONICS AND PREVENTS GALVANIC CORROSION: Safe on circuits, battery terminals, and sensors, CorrosionX forms a dielectric film rated over 39,000 volts that displaces moisture and stops galvanic corrosion between dissimilar metals in harsh environments.
  • QUALIFIED BY THE U.S. NAVY FOR ADVANCED MARINE CORROSION PROTECTION: Corrosion Technologies is the only manufacturer in the world with products — CorrosionX being the flagship — qualified under the Advanced Corrosion Preventive Compound military specification; protects outboards, terminals, and powerheads with a self-healing, moisture-blocking film.
SaleBestseller No. 2
CorrosionX Rust Inhibitor, Industrial-Strength Dielectric Corrosion Prevention, Lubricant & Penetrant for Marine, Automotive, Electronics & RV Use, Protects Bolts, Cables, Engines, Parts, 6oz Aerosol
  • BUILDS A LASTING SHIELD AGAINST RUST AND CORROSION: Forms a moisture-blocking dielectric barrier that molecularly bonds to metal surfaces and subsurfaces; perfect for protecting trailers, marine gear, or tools stored in salt-heavy, humid environments.
  • DELIVERS LONG-LASTING, MARINE-GRADE LUBRICATION: Clings to metal like a magnet and resists pressure, friction, and washout; ideal for lubricating locks, hinges, cable pulleys, and marine components exposed to heavy loads, rain, salt spray, tidal moisture, or constant vibration on boats and coastal equipment.
  • FREES RUSTED PARTS WITH DEEP PENETRATION: Industrial-strength penetrating oil releases corrosion on frozen bolts, marine fittings, and seized engine parts; penetrates to free up when other products fail in salty, humid, or wet environments on boats, farm tools, or machinery.
  • PROTECTS ELECTRONICS AND PREVENTS GALVANIC CORROSION: Safe on circuits, battery terminals, and sensors, CorrosionX forms a dielectric film rated over 39,000 volts that displaces moisture and stops galvanic corrosion between dissimilar metals in harsh environments.
  • QUALIFIED BY THE U.S. NAVY FOR ADVANCED MARINE CORROSION PROTECTION: Corrosion Technologies is the only manufacturer in the world with products — CorrosionX being the flagship — qualified under the Advanced Corrosion Preventive Compound military specification; protects outboards, terminals, and powerheads with a self-healing, moisture-blocking film.
SaleBestseller No. 3
CorrosionX Rust Inhibitor, Industrial-Strength Dielectric Corrosion Prevention, Lubricant & Penetrant for Marine, Automotive, Electronics & RV Use, Protects Bolts, Cables, Engines, 16oz Trigger Spray
  • BUILDS A LASTING SHIELD AGAINST RUST AND CORROSION: Forms a moisture-blocking dielectric barrier that molecularly bonds to metal surfaces and subsurfaces; perfect for protecting trailers, marine gear, or tools stored in salt-heavy, humid environments.
  • DELIVERS LONG-LASTING, MARINE-GRADE LUBRICATION: Clings to metal like a magnet and resists pressure, friction, and washout; ideal for lubricating locks, hinges, cable pulleys, and marine components exposed to heavy loads, rain, salt spray, tidal moisture, or constant vibration on boats and coastal equipment. DELIVERS LONG-LASTING, MARINE-GRADE LUBRICATION: Clings to metal like a magnet and resists pressure, friction, and washout; ideal for lubricating locks, hinges, cable pulleys, and marine components exposed to heavy loads, rain, salt spray, tidal moisture, or constant vibration on boats and coastal equipment.
  • FREES RUSTED PARTS WITH DEEP PENETRATION: Industrial-strength penetrating oil releases corrosion on frozen bolts, marine fittings, and seized engine parts; penetrates to free up when other products fail in salty, humid, or wet environments on boats, farm tools, or machinery.
  • PROTECTS ELECTRONICS AND PREVENTS GALVANIC CORROSION: Safe on circuits, battery terminals, and sensors, CorrosionX forms a dielectric film rated over 39,000 volts that displaces moisture and stops galvanic corrosion between dissimilar metals in harsh environments.
  • QUALIFIED BY THE U.S. NAVY FOR ADVANCED MARINE CORROSION PROTECTION: Corrosion Technologies is the only manufacturer in the world with products — CorrosionX being the flagship — qualified under the Advanced Corrosion Preventive Compound military specification; protects outboards, terminals, and powerheads with a self-healing, moisture-blocking film.
Bestseller No. 4
CorrosionX Heavy Duty Anti Rust Spray, Dripless Self-Healing Corrosion Inhibitor with Waterproof Barrier for Marine, Agricultural & Industrial Equipment in Harsh, Saltwater Environments, 12oz Aerosol
1,005 Reviews
CorrosionX Heavy Duty Anti Rust Spray, Dripless Self-Healing Corrosion Inhibitor with Waterproof Barrier for Marine, Agricultural & Industrial Equipment in Harsh, Saltwater Environments, 12oz Aerosol
  • RELENTLESS RUST PROTECTION FOR ANY WEATHER: This self-healing barrier clings and protects metal through rain, seawater, and pressure washing; it won’t drip, wash away, or quit, making it a reliable shield in even the harshest outdoor conditions.
  • BUILT TO PROTECT FOR YEARS, NOT MONTHS: From boat trailers to barn doors, this long-lasting formula keeps working for up to 5 years indoors and 2 years outside; perfect for anyone who needs reliable rust protection.
  • IDEAL FOR HEAVY-DUTY ELECTRICAL CONNECTIONS: Designed for larger terminals and connectors like battery posts and grounding lugs, this thick, non-conductive formula provides lasting protection without harming sensitive components, perfect where rugged sealing is needed.
  • STAYS FLEXIBLE, NEVER FLAKES OR CRACKS: Forget waxy sprays that dry out and break down, this rust shield flexes with your gear, staying active and bonded even when machinery shifts, vibrates, or takes a beating in the field.
  • SMART SCIENCE THAT BLOCKS HIDDEN DAMAGE: Polar Bonding locks onto surfaces to stop corrosion before it starts, preventing electrolysis and galvanic damage in places you can’t even see, from engine bays to salty docksides.
Bestseller No. 5
CorrosionX Aviation, Long-Lasting Polar Bonding Anti-Corrosion Aviation-Grade Spray, Displaces Moisture, Instantly Stops Corrosion, Self-Healing Protection for Aircraft & Electronics, 16oz Aerosol
  • CorrosionX Aviation leverages exclusive Polar Bonding and Fluid Thin Film Coating (FTFC) technology to displace moisture and corrosion-causing electrolytes, forming bonds on the molecular level that prevent corrosion before it can begin; proven to be more than twice as effective as conventional airframe corrosion inhibitors.
  • DISPLACES MOISTURE FROM CRITICAL AREAS: Designed to overcome the hidden risks of condensation and trapped humidity in airframes, CorrosionX Aviation climbs rivets and penetrates deep into lap seams and joints, forcing out moisture and restoring functionality to damp components; ideal for protecting against corrosion-related failures in any climate, not just coastal or humid zones.
  • FORMS A SELF-HEALING, LONG-LASTING FILM: Creates a durable Fluid Thin Film Coating (FTFC) that continuously self-heals to protect exposed metal; resists corrosion without hardening or interfering with inspections; ideal for protecting both stored aircraft and those in frequent operation.
  • SAFE FOR METALS, ELECTRONICS, AND MOVING PARTS: Contains no waxes or silicones; non-conductive and safe for avionics, switches, battery terminals, antenna bases, buss bars, and circuit boards; also lubricates flight-critical moving parts like drum actuators, hinges, rotor heads, and sliding components. SAFE FOR METALS, ELECTRONICS, AND MOVING PARTS: Contains no waxes or silicones; non-conductive and safe for avionics, switches, battery terminals, antenna bases, buss bars, and circuit boards; also lubricates flight-critical moving parts like drum actuators, hinges, rotor heads, and sliding components.
  • TRUSTED IN MILITARY AND PROFESSIONAL AVIATION: Used extensively by U.S. military and NATO forces; CorrosionX products and application tools carry official National Stock Numbers (NSNs); trusted worldwide to protect aircraft systems operating in the harshest aviation conditions.

Last update on 2026-06-08 / Affiliate links / Images from Amazon Product Advertising API


 

 


This product presentation was made with AAWP plugin.

Leave a Comment

Share to...