Reverse Camera Display Upside Down – 2014-2015 Ford Transit Connect

2014-2015 Transit Connect – Reverse Camera Display Upside Down

2014 – 2015 Transit Connect vehicles equipped with Parking Aid Camera can exhibit an upside down video display when the vehicle is placed into reverse.

 

To correct this condition, perform PMI (Programmable Module Installation) on the IMP-B (Image Processing Module B) and re-install the As-Built data.

 


 

Service Information & Reprogramming

Software necessary to program electronic modules to the latest calibration level, perform module initialization (PATS), and set Programmable Parameters on Ford, Lincoln and Mercury vehicles.

Ford Module Programming (FMP) is a software application that allows subscribers to program electronic modules on Ford, Lincoln and Mercury vehicles. It can be used for:

  • Reprogramming emission-related (OBDII) modules on some vehicles manufactured in 1995 and all vehicles manufactured from 1996 to the present
  • Reprogramming or reconfiguring non-emission-related modules on many vehicles (UBP and MS-CAN not supported)

In addition, module initialization (PATS) functions such as Keycode Erase/Reprogram and PCM Parameter Reset can be done using this application.

J2534 Device Reverse Camera Display Upside Down - 2014-2015 Ford Transit Connect » small light Reverse Camera Display Upside Down - 2014-2015 Ford Transit Connect » small light Reverse Camera Display Upside Down - 2014-2015 Ford Transit Connect » small light using Ford Module Programming (FMP) can Reprogram and Configure most Modules.

Latest Calibration Information

Module Build Data (As-Built)
Use VIN to obtain As-Built data

www.motorcraftservice.com

 

Leave a Comment

Share to...