| “This site contains affiliate links for which OEMDTC may be compensated” |
NHTSA ID Number: 10202611
Manufacturer Communication Number: SSM 50169
Summary
Some 2021 Bronco vehicles equipped with front parking aid sensors and a Ford
Performance and/or aftermarket winch may inhibit the front parking aid sensor warning system and cause it to activate. As a resolution, the front sensors must be turned off by performing the following from the touchscreen; 1. Press Features on the touchscreen. 2. Press Driver Assistance > Park Aid Sensors > Front On, Rear On. 3. Front Sensors (Always) Off > Park Aid Sensors > Front Sensors (Always). Note: trying to adjust the location of the sensor will not resolve this concern. If the front sensors do not stay off after each key cycle monitor OASIS for additional information and schedule a service appointment with the customer once the repair becomes available.
1 Affected Product
Vehicle
| MAKE | MODEL | YEAR |
| FORD | BRONCO | 2021 |
APPLICABLE VEHICLES
2021 TRUCK: G1 U725N BRONCO
1 Associated Document
Manufacturer Communications
SSM 50169 – 2021 Bronco – Equipped With Front Parking Aid Sensors And A Ford Performance And/Or Aftermarket Winch – Front Parking Aid Sensor Warning
Loading...
Reload document 
Open in new tab
Bestseller No. 1
Rough Country High Winch Mount for 2021-2024 Ford Bronco - Fits 9,500LB+ Winches & 20" LED Light Bars, Off-Road Front Bumper Upgrade
- Versatile: Allows the installation of 9500 or larger winch with standard 4.5" x 10" bolt pattern to a location above the factory steel modular bumper.
- LED Lighht Bar Ready: Fits up to a 20" LED Light bar with or without DRL. Comes with a light bar block off grill for use without light option.
- Adaptive Fit: Allows use of adaptive cruise control system and includes a mounting plate for the sensor mounting kit.
- Built Tough: Made from 1/4" durable steel with 7 gauge welded on front plate. Includes harness extensions for the sensor kit and 1/4" thick spacers to clear factory tow hooks.
- Lifetime Protection: Backed by Rough Country's limited lifetime replacement warranty.
Bestseller No. 2
Rough Country Winch Mount for 2021-2024 Ford Bronco | PRO9500S - 51094
- Allows the installation of 9500 or larger winch with standard 4.5" x 10" bolt pattern to a location above the factory steel modular bumper.
- Holds a 20" DRL and non-DRL light bar.
- Allows use of adaptive cruise control system.
- Includes harness extensions for the sensors.
- Backed by Rough Country's Limited Lifetime Replacement Warranty.
Bestseller No. 3
Rough Country LED Winch Mount for 2021-2024 Ford Bronco | PRO9500S - 51095
- Allows the installation of 9500 or larger winch with standard 4.5" x 10" bolt pattern to a location above the factory steel modular bumper.
- Holds a 20" DRL and non-DRL light bar.
- Allows use of adaptive cruise control system.
- Includes harness extensions for the sensors.
- Backed by Rough Country's Limited Lifetime Replacement Warranty.
Bestseller No. 4
Rough Country Hidden Winch Bumper for 2021-2024 Ford Bronco | All Models - 51065
- Hidden winch mount with skid plate.
- Easy installation.
- Durable powder-coated steel construction.
- Allows installation of Rough Country tow hook to shackle conversion.
- Backed by Rough Country's Limited Lifetime Replacement Warranty.
Bestseller No. 5
KUAFU Winch Plate Compatible with 2021-2024 Ford Bronco Hidden Winch Mount Mounting Black Steel
- Fitment: Compatible with 2021-2024 Ford Bronco. Only available on models with frame mount tow eye. Not available on 2.7L models
- Features: The winch frame is made of automotive-grade steel, which has better hardness and strength. Black powder coating provides excellent protection, making the steel less prone to rust
- Function: The winch bracket adopts a hidden design, which will not affect the beauty of the vehicle after installation. At the same time, the anti-skid plate can help protect the bottom of the vehicle from injury, so that you can drive with peace of mind
- Installation: The winch bracket is installed with screws, which is simple and quick. A simple modification is required. Professional installation is recommended
- Package: You will receive 1 X winch mount and installation accessories. There are no instructions
Bestseller No. 6
IAG I-Line Heavy Duty Winch Mount for Ford Bronco 2021+ 2/4 Door (Modular/Capable Bumper Only)
- THE IAG I-LINE HEAVY DUTY WINCH MOUNT - Get your 2021+ Bronco ready for serious off-roading with the IAG I-Line Heavy Duty Winch Mount. Designed to fit the Modular Bumper, it can also mount up to the Capable Bumper with a few tweaks. This rugged mount supports most aftermarket winches, giving you the freedom to choose and mount the perfect winch for all your off-roading adventures. It comes with everything you need to relocate your parking sensors and camera, so you can keep your Bronco’s safety and tech features intact. Strong, versatile, and attractive, this winch mount is a solid upgrade for any Bronco enthusiast looking to step-up their vehicle's off-roading capabilities.
- COMPATIBLE WITH MOST AFTERMARKET WINCHES - The IAG I-Line Heavy Duty Winch Mount is compatible with most aftermarket winches and large fairleads, offering you the freedom to customize your setup. While factory winches may be costly and limited in selection, aftermarket options allow you to select the features and upgrades that matter most to you. Whether you're seeking a specific remote configuration or a winch with a higher weight capacity, IAG's Winch Mount provides a solid platform for your optimal winch setup.
- HEAVY DUTY CONSTRUCTION - Built for strength and durability, the IAG I-Line Heavy Duty Winch Mount is constructed from a rugged sheet of steel. It features a black powder coated finish for an extra layer of protection against wear, abrasion and the elements. This mount is able to withstand even the toughest challenges on the trail, offering a solid and secure surface to keep your winch mounted and ready to go.
- DIY INSTALLATION - If you're mechanically inclined, the IAG I-Line Heavy Duty Winch Mount should be a straightforward task that can be completed in approximately 2 hours. There is no cutting or drilling required to install the mount to the Modular Bumper, though the Capable bumper does require permanent modification. While the entire job can be done with a good set of ratchets and hand tools, it will go faster with an impact wrench and sockets.
- CAPABLE BUMPER MODIFICATIONS - If you have a Capable Bumper, you’ll need to make a couple of permanent modifications to fit the IAG I-Line Heavy Duty Winch Mount. This task would only be suited to someone with advanced mechanical abilities, and the willingness to perform modifications to the factory bumper. To gain the additional clearance needed to install the mount to the OEM bumper horns, the tow cover assemblies will need to be removed, cut and trimmed to fit the new tow hook mounts on both sides.
Bestseller No. 7
YZONA Front Bumper Bull Bar with Winch Plate & D-Rings Compatible for 2021 2022 2023 2024 Ford Bronco 2/4 Door (ONLY fit Steel Modular Front Bumper), Heavy Duty Steel Winch Mount Brush Guard Black
- 【Compatible】Front Bumper Bull Bar Compatible with 2021-2024 Ford Bronco 2 Door & 4 Door models with the original modular steel front bumper ONLY. (NOT compatible with Ford Bronco Sport). Please verify product compatibility with your vehicle before making a purchase.
- 【Versatile Design】Our grille guard offers more than just protection for your bumper. It enhances safety by providing added bumper protection. Additionally, it features integrated holes that allow for convenient mounting of a winch and D-ring tow hook.
- 【Superior Quality】Our product features a sturdy steel construction that guarantees long-lasting durability and reliability. It is meticulously coated with a durable black anti-rust finish, providing enhanced protection against corrosion and wear.
- 【Effortless Installation】Experience a seamless and straightforward installation process with our product. It requires no modifications and can be easily bolted on. You'll have it installed in just 30 minutes, saving you time and effort.
- 【Extensive Customer Care】We offer 1 year warranty and lifetime customer support. You'll receive installation instructions and accessories with your purchase. For any questions or concerns, our customer support team is here to assist you.
Bestseller No. 8
CALLIERT Winch Mounting Plate Compatible with 2021-2025 Ford Bronco (ONLY for Steel Modular Front Bumper)
- Ideal Compatibility: Compatible with Steel Modular Bumper Suitable for 2021 2022 2023 2024 2025 Ford Bronco 4-Door and 2-Door (Not compatible with Ford Mustang sport)，ensuring perfect integration with your vehicle
- Unique Design: Compatible with winch models 9500-15000 lbs, ensuring that it meets various lifting and towing needs. This Bronco winch mount features a radar hole and is compatible with most winch mounting positions (winch not included).
- Material: Made of steel with an electrophoresis and black texture coating. The screws are made of Dacromet and stainless steel material
- Packaging: The product dimensions are 34 x 9 x 10 inches，Weight is 70 lbs; and the packaging dimensions are 54x17x11 inches, weight 83 lbs. Include installation brackets, wiring harnesses, screw pack, and a range of accessories
- Effortless Installation: No additional drilling is required for installation, making it easy to install. If you encounter any problems, please contact us for professional guidance
Bestseller No. 9
Bronco Front Bumper with Winch Plate Front Bumper with Bull Bar&Winch Mount Off-Road Brush Guard Winch Mounting Plate Compatible with 2021-2023 Ford Bronco (ONLY for Steel Modular Front Bumper)
- Application: Bronco Front Bumper with Winch Plate compatible with Ford Bronco 2021, 2022,2023 2/4 Doors with modular steel front bumper (Not for Bronco Sport)
- Simple Installation: Offroad front bumper is easy to install. No drilling or cutting required. You can follow the instruction to finish the installation and just need a few minutes.
- Protection: Front bumper replacement kit upgrades appearance of your Bronco, provide maximum protection and strength for the front end of your car, make your driving safer and more reliable.
- Material: 2023 ford bronco front bumper is made of Heavy-duty manganese steel construction, with a black powder coating process, which is Rust-Resistant and Corrosion-Resistant. Bronco front bumper has a long-lasting life.
- Package & After-Sales: 1 x Bronco front bumper with winch plate; 1 pack of install hardware; 1 x installation instruction. If there is a quality problem with the product, please contact us in time, and we will bring you a satisfactory shopping experience.
Bestseller No. 10
Rough Country High Winch Mount with 20" LED Light Bar for Ford Bronco (2021-2025) - Universal Winch Tray, 100W LED Bar
- Allows the installation of 9500LB winch or larger with standard 4.5" x 10" bolt pattern to a location above the factory steel modular bumper.
- Includes 20" LED Light bar illuminating 7,200 lumens with 100 watts CREE LED and 30-degree spot focus beam.
- Allows use of adaptive cruise control system and includes harness extensions for sensors.
- Winch mount and tray made from 1/4" mild steel powder coated black. Includes 1/4" thick spacers to clear factory tow hooks.
- Lifetime Protection - Backed by Rough Country's Limited Lifetime Replacement Warranty.
Last update on 2025-04-19 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.