September 14, 2021 NHTSA CAMPAIGN NUMBER: 21V712000
Inadequate Panoramic Roof Glass Panel Bonding
A roof panel that separates from a vehicle can become a road hazard, increasing the risk of a crash or injury.
NHTSA Campaign Number: 21V712
Manufacturer Ford
Motor Company
Components VISIBILITY
Potential Number of Units Affected 13,544
Summary
Ford Motor Company (Ford) is recalling certain 2021 Mustang Mach-E vehicles. The vehicle’s panoramic roof glass panel may not have been properly bonded to the vehicle, which could allow it to detach.
Remedy
Dealers will apply additional urethane adhesive, free of charge. Owner notification letters were mailed October 29, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford’s number for this recall is 21S42.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.nhtsa.gov.
Check if your Vehicle has a Recall
AFFECTED VEHICLES
| Vehicle | Model Year | Assembly Plant | Build Dates |
| Mustang Mach-E | 2021 | Cuautitlan | February 24, 2020 through June 18, 2021 |
REASON FOR THIS SAFETY RECALL
In some of the affected vehicles, the urethane adhesion of the panoramic roof glass panel to the vehicle body structure may be inadequate. If affected, the roof glass may loosen and could become detached from the vehicle presenting a road hazard. Customers may also experience increased wind noise and water leaks.
SERVICE ACTION
Parts Availability – Prior to scheduling customer for repairs, ensure the foam seal required for the panoramic roof glass is on site at your dealer. LJ8Z-19B822-AA is expected to start shipping by the end of November 2021.
Before demonstrating or delivering any new in-stock vehicles involved in this recall, dealers are to reseal the panoramic glass roof. This service must be performed on all affected vehicles at no charge to the vehicle owner.
NOTE: The vehicles in this program also require 21C22 be performed. Check OASIS to confirm FSA 21C22 is open, and if so, refer to the technical instructions to perform both 21C22 and 21S42 as a combined repair procedure.
OWNER NOTIFICATION AND MAILING SCHEDULE
Owners were mailed letters the week of October 25, 2021, informing them repair instructions and parts ordering information are anticipated to be available to dealers on November 15, 2021.
Dealers should repair any affected vehicles that arrive at their dealerships, whether or not the customer has received a letter.
PLEASE NOTE:
Federal law requires dealers to complete this recall service before a new vehicle is delivered to the buyer or lessee. Violation of this requirement by a dealer could result in a civil penalty of up to $21,000 per vehicle. Correct all vehicles in your new vehicle inventory before delivery.
SOLD VEHICLES
- Ford has not issued instructions to stop selling/delivering or driving used vehicles under this compliance recall. Owners should contact their dealer for an appointment to have their vehicles remedied as soon as practicable. Owners can continue to safely drive their vehicles.
- Immediately contact any of your affected customers whose vehicles are not on your VIN list but are identified in OASIS. Give the customer a copy of the Owner Notification Letter (when available) and schedule a service date.
- Correct other affected vehicles identified in OASIS which are brought to your dealership.
- Dealers are to prioritize repairs of customer vehicles over repairs of new and used vehicle inventory.
STOCK VEHICLES
- Correct all affected units in your new vehicle inventory before delivery.
- Use OASIS to identify any affected vehicles in your used vehicle inventory.
DEALER-OPERATED RENTAL VEHICLES
The Fixing America’s Surface Transportation (FAST) Act law effective June 2016 prohibits a rental company from selling, renting or leasing vehicles subject to a safety or compliance recall. Please consult your legal counsel for legal advice.
TITLE BRANDED / SALVAGED VEHICLES
Affected title branded and salvaged vehicles are eligible for this recall.
OWNER REFUNDS
Refunds are not approved for this program.
RENTAL VEHICLES
Dealers are pre-approved for up to 2 days for a rental vehicle. Follow Extended Service Plan (ESP) guidelines for dollar amounts. Rentals will only be reimbursed for the day(s) the vehicle is at the dealership for part replacement. Prior approval for more than 2 rental day(s) is required from the SSSC. Contact the SSSC via the SSSC Web Contact Site for consideration and approval if appropriate.
PICKUP AND DELIVERY
2021 Mustang Mach-E customers affected by this recall have the option of complimentary Vehicle Pickup & Delivery service (at participating dealers) with a rental for up to 2 days. Claim any additional rental days approved by the SSSC as instructed.
Dealers are authorized to claim unique services for completing this program, including:
- Dealers are authorized to claim one-half labor hour per repair for vehicle pick-up and delivery services.
- Dealers must retain a Vehicle Pick-up and Delivery Record with the repair order documentation. Refer to the Claims Preparation and Submission section and Attachment IV for details.
PARTS REQUIREMENTS / ORDERING INFORMATION
| Part Number | Description | Order Quantity | Claim Quantity |
| LJ8Z-19B822-AA | Panoramic foam seal | 1 | 1 |
| Consumables Required for all Vehicles | |||
| Obtain Locally | Masking Tape | Claim as MISC OTHER | |
| Glass Cleaner | |||
| Dow BETAPRIME 5504G / Sika Primer-207 or equivalent | |||
| SikaTack MACH 60 / SikaTack MACH 30 /
Dow BETASEAL Express / Sika Tack ASAP Urethane Adhesive or equivalent | |||
| Roloc Disks or equivalent | |||
| Isopropyl Alcohol | |||
| Ford Approved Epoxy Based Primer | |||
| Related Damage Only Part Numbers | |||
| LJ8Z-5803100-A | Base Windshield | VIN Specific – Only if breaks during removal procedure. | |
| LJ8Z-5803100-H | High Series Windshield | ||
CERTAIN 2021 MODEL YEAR MUSTANG MACH-E VEHICLES — WINDSHIELD AND PANORAMIC GLASS REATTACHMENT
SERVICE PROCEDURE – BODY SHOP INSTRUCTIONS
NOTE: These instructions are not intended to be followed from beginning to end. There are several locations where procedures must be completed by other groups before the procedure in these instructions can be resumed.
The instructions should be followed in this order.
1. Body Shop Part One – Prepare vehicle for repairs – Steps 1-5
2. Glass Company Part One – Remove windshield – Steps 1-11 as required.
3. Body Shop Part Two – Improve Flange adhesion – Steps 6-13 as required.
4. Glass Company Part Two – Improve panoramic glass and install windshield – Steps 12-27
5. Body Shop Part Three – Calibrate Image Processing Module A – Steps 14-16
BODY SHOP – PART ONE
1. Remove the windshield wiper pivot arms. Please follow Workshop Manual (WSM) procedures in Section 501-16.
2. Remove the cowl panel grille. Please follow WSM procedures in Section 501-02.
3. Remove the headliner. Please follow WSM procedures in Section 501-05.
4. Remove the interior rear view mirror. Please follow WSM procedures in Section 501-09.
5. Disconnect the heated windshield electrical connector and tape the wires to the windshield to prevent damage. See Figure 1.
BODY SHOP – PART TWO
6. Cover/protect the body and interior of the vehicle with a one-time use, disposable drop plastic.
7. Using a scraper, cut the through the urethane bead vertically down to the painted surface to create a starting point. Once reaching the painted surface, pry one side of the bead up with the scraper. Using fingers, work to peel the urethane off the windshield body flange.
8. In areas where the urethane peeled up cleanly, use 400-600 grit sandpaper or a fine Scotch-Brite pad to manually scuff clear coat lightly until it displays a white haze being sure to only abrade the flange. See Figure 2.
9. In areas where the urethane did not peel up cleanly, use a Scotch-Brite 3M Roloc disk to remove all remaining urethane from flange while attempting to minimize abrasion to the painted surface. See Figure 3.
10. Clean off the entire windshield flange from all dirt and debris.
11. Using Isopropyl Alcohol and a lint-free cloth, clean off the flange surface. Allow one minute for the Isopropyl Alcohol to evaporate.
12. Apply tape to the edges of the windshield flange to protect the surface of the vehicle. See Figure 4.
13. Apply one coat of any Ford approved epoxy based repair primer to any spots where the roloc disk was used to grind off the urethane. Allow time for the primer to dry per the manufacturer’s instructions. See Figure 5.
BODY SHOP – PART THREE
NOTE: Part Three may only be performed once the Glass Company repair procedures have been completed.
14. Remove the protective cover from the vehicle and clean off any dirt and debris.
15. Re-install all previously removed components by reversing steps 1-4.
16. After the windshield has been properly installed and the urethane has dried per the manufacturer’s instructions, carry out the Image Processing Module A (IPMA) Camera alignment using a scan tool.
CERTAIN 2021 MODEL YEAR MUSTANG MACH-E VEHICLES — WINDSHIELD AND PANORAMIC GLASS REATTACHMENT
SERVICE PROCEDURE – GLASS COMPANY INSTRUCTIONS
NOTE: These instructions are not intended to be followed from beginning to end. There are several locations where procedures must be completed by other groups before the procedure in these instructions can be resumed.
The instructions should be followed in this order.
1. Body Shop Part One – Prepare vehicle for repairs – Steps 1-5
2. Glass Company Part One – Remove windshield – Steps 1-11 as required.
3. Body Shop Part Two – Improve flange adhesion – Steps 6-13 as required.
4. Glass Company Part Two – Improve panoramic glass and install windshield – Steps 12-27
5. Body Shop Part Three – Calibrate Image Processing Module A – Steps 14-16
GLASS COMPANY – PART ONE
1. Apply tape to the perimeter of the windshield to protect from paint damage. See Figure 1.
NOTE: Tape off the roof panel near the centerline of the vehicle, where the roof extends forward. When using a piano wire to cut out the glass, the wire will roll over the class A paint in the roof area, once tension is applied to it. If using a nylon style string, this will not damage the paint.
2. Remove the windshield using a piano wire cut out tool. See Figure 2 where cutting fiber line was used.
3. Inspect the windshield for possible damage. Is there any damage to the windshield?
Yes – Replace the windshield. Proceed to Step 4.
No – Re-install the original windshield. Proceed to Step 12.
NOTE: Damage to the alignment pins does not require windshield replacement.
4. Use glass cleaner to clean the surface of the new windshield to be installed.
5. Release the tabs and remove the in-vehicle temperature and humidity sensor. See Figure 3.
6. Re-install the temperature and humidity sensor into the new windshield.
7. Remove the Image Processing Module A (IPMA) Camera. See Figure 4.
1. Release the tab.
2. Release the tab and remove the IPMA camera.
8. Re-install the IPMA camera into the new windshield.
9. Remove the rain sensor. See Figure 5.
1. Release the retainers.
2. Remove the rain sensor.
10. Inspect the rain sensor gel pack for damage. See Figure 6.
NOTE: If the rain sensor gel pack is damaged, install a new rain sensor.
11. Re-install the rain sensor into the new windshield.
GLASS COMPANY – PART TWO
NOTE: Part Two may only be performed once the Body Shop repair procedures to the window flange have been completed.
12. Shave down the urethane on the original windshield until there is 1mm remaining. See Figure 7.
13. Apply two coats of urethane body flange primer according to the manufacturer’s instructions to the entire windshield body flange at the urethane location. Additionally, apply two coats of window primer at any location where the clearcoat or paint layers have been damaged to provide environmental protection. Allow dry time between each coat applied.
Material: Sika® Aktivator PRO / Dow® BETAPRIME™ 5504G / Sika® Primer-207
14. Apply window primer according to the manufacturer’s instructions to the new windshield. Allow dry time.
Material: Sika® Aktivator PRO / Dow® BETAPRIME™ 5504G / Sika® Primer-207
NOTE: This step only applies when replacing the windshield.
15. Apply window primer according to the manufacturer’s instructions to the fixed glass anywhere the urethane adhesive was completely removed. Allow dry time.
Material: Sika® Aktivator PRO / Dow® BETAPRIME™ 5504G / Sika® Primer-207
NOTE: This step only applies when reusing the original windshield.
16. Using Isopropyl Alcohol and a clean lint-free cloth or moistened dobber, clean the flange in the area where the primer is to be applied along the front header flange of the panoramic roof. See Figure 8.
NOTE: The tape is for locational reference only. It is not required to apply tape before cleaning the flange.
17. Repeat step 16 on both the rear bow and the side rails. See Figures 9 and 10.
18. Apply two coats of urethane body flange primer according to the manufacturer’s instructions using a dauber to the front header. Allow dry time between each coat applied. See Figure 11.
Material: Sika® Aktivator PRO / Dow® BETAPRIME™ 5504G / Sika® Primer-207
19. Repeat step 18 on both the rear and the side rails.
NOTE: Please follow the website link https://bcove.video/3vaAI6C for applying the primer at the rear bow. Driver side shown, passenger side similar.
20. Using a 3M P.A.-1 hand applicator or similar tool, install one of the two extruded foam seal strips between the front header flange and the roof glass at a depth of 1/2″-1″ (12-25mm). See Figures 12 and 13.
NOTE: The foam seal may extend past where the primer was applied. See Figure 14.
21. Using the second foam seal, cut two 5 inch long strips and install each strip between the rear bow and the roof glass. See Figures 15 and 16.
22. Cut the urethane adhesive applicator tip to specification. See Figure 17.
Material: Sika® SikaTack® MACH 60 / Sika® SikaTack® MACH 30 / Dow® BETASEAL™ Express Material: Sika Tack ASAP Urethane Adhesive
23. Apply a urethane adhesive bead. See Figure 18.
1. Start and end at the original overlap points to prevent air and water leaks.
2. Apply a urethane adhesive bead 14 mm (0.551 in) high and 8 mm (0.314 in) wide on top of the existing trimmed urethane adhesive bead on the pinch weld.
3. Make sure there are no gaps in the bead.
NOTICE: Make sure the urethane bead is uniform to prevent air and water leaks.
NOTE: The fixed glass must be installed within 10 minutes of applying the urethane adhesive.
NOTE: Use a power caulk gun that applies the urethane adhesive with less effort and a continuous bead.
24. Open the vehicle windows to prevent the air pressure of closing doors from compromising the urethane adhesive bond.
NOTICE: The door windows must be left open during the adhesive curing time.
25. Install the fixed glass to the vehicle.
1. Install the fixed glass, pressing firmly by hand to ensure a good bond.
2. Secure the fixed glass in the correct position with tape until the urethane adhesive has cured.
26. Apply urethane adhesive between the glass on both front and rear headers using the foam seal as a back stop to ensure the urethane wets out to both the flange and the glass. See Figures 19 and 20.
NOTE: If tape was applied for locational reference, be sure to remove the tape directly after urethane application.
27. Repeat step 26 for the roof’s side rails using the urethane as a back stop to acquire adhesive wet out to both the glass and the flange.
WARNING: Do not drive vehicle until the urethane adhesive seal has cured. Follow urethane adhesive manufacturer’s curing directions. Inadequate or incorrect curing of the urethane adhesive seal will adversely affect glass retention. Failure to follow these instructions may result in serious injury to vehicle occupant(s).
1 Affected Product
Vehicle
12 Associated Documents
Manufacturer Notices(to Dealers,etc) – Dealer Bulletin re NEW VEHICLE DEMONSTRATION / DELIVERY HOLD – Safety Recall 21S42 Certain 2021 Model Year Mustang Mach-E Vehicles Panoramic Roof Glass Reseal
RCMN-21V712-5316.pdf 6957.347KB
Recall 573 Report
RCLRPT-21V712-9665.PDF 214.297KB
Recall 573 Report
RCLRPT-21V712-9398.PDF 214.314KB
Manufacturer Notices(to Dealers,etc) – Advance Notice re NEW VEHICLE DEMONSTRATION / DELIVERY HOLD – Advance Notice Safety Recall 21S42 Certain 2021 Model Year Mustang Mach-E Vehicles Panoramic Roof Glass Reseal
RCMN-21V712-4494.pdf 133.563KB
Recall 573 Report
RCLRPT-21V712-2479.PDF 215.479KB
ISSUED Renotification Notice
Recall Quarterly Report #1, 2021-4
RCLQRT-21V712-2132.PDF 211.143KB
ISSUED Owner Notification Letter(Part 577)
RCONL-21V712-8877.pdf 52.958KB
Recall Acknowledgement
RCAK-21V712-3941.pdf 645.454KB
Defect Notice 573 Report
RCLRPT-21V712-7184.PDF 214.158KB
Recall Quarterly Report #2, 2022-1
RCLQRT-21V712-2342.PDF 211.256KB
ISSUED Renotification Notice
RCRN-21V712-3615.pdf 488.973KB
Latest Recalls Documents
- GREAT HOLDING POWER: Advanced Mattfix polyurethane windshield adhesive technology delivers strong and reliable adhesion to hold the window firmly in place while creating a secure seal that helps prevent leaks during everyday driving.
- HIGH-STRENGTH BOND: This windshield glue adhesive forms an incredibly strong, durable bond between glass and metal surfaces, ensuring reliable windshield installation without primer while maintaining a permanent holdover time.
- EASY TO APPLY: Easy-to-dispense windshield urethane adhesive flows evenly when used with manual or electric caulking guns, creating a clean, consistent bead without sagging or excessive mess. This car window adhesive is suitable for both professional glass installation and DIY car, SUV, or truck maintenance.
- FAST-CURING FORMULA: Quick-setting windshield adhesive sealant with no-sag properties. It cures rapidly to speed up installation. Mattfix auto glass gluereduces vehicle downtime to just a few hours while delivering a lasting performance.
- WATER & WEATHER RESISTANT: Our car window glue is designed to withstand high and low temperatures, excessive moisture, and road vibrations. This windshield sealant black compound maintains a stable and secure glass positioning during long-term van or motorhome use.
- PROFESSIONAL AUTO GLASS BOND: High-strength urethane adhesive bonds windshields securely to vehicle frames for a permanent, weatherproof seal. Helps prevent leaks and withstands road vibrations and extreme temperatures.
- SUPER FAST 1-HOUR CURE: Advanced moisture-curing formula sets quickly with a 10-15 minute work time and achieves safe drive-away strength in as little as one hour (at 73°F). Ideal for professionals to minimize vehicle downtime.
- EASY, NO-MESS APPLICATION: Medium viscosity, non-sag formula won't drip for controlled application on vertical or overhead surfaces. Use any standard 10.5 oz cartridge caulking gun (manual or powered) for precise adhesive placement.
- ONE-PART URETHANE, NO MIXING: Ready-to-use single-component polyurethane adhesive requires no mixing or special equipment. Simplifies windshield replacement with consistent bonding performance and no guesswork.
- VERSATILE & UNIVERSAL USE: Designed for replacing bonded auto glass, including windshields, rear windows, and quarter glass. Also suitable for some non-structural panel bonding applications. Universal fit for cars, trucks, and SUVs.
- BOND WINDSHIELDS YOUR WAY: Compatible with both manual or powered caulking guns
- FAST-CURING: Adhesive produces rapid results, curing in just 24 hours
- For industrial/occupational use only. Not for consumer use
- HIGH-BOND STRENGTH: Designed for permanent windshield bonding and stationary glass attachment
- MEDIUM-VISCOSITY FORMULA: Non-sag urethane formula makes for clean and easy application
- Strong Adhesion – This windshield glue adhesive absorbs shocks and vibrations to keep windshields securely in place. Prevents cracks and leaks, even on rough roads or under extreme stress.
- Quick-Curing & Non-Drip – Our urethane adhesives formula sets quickly without sagging or dripping, significantly reducing hold time. This allows you to complete vertical and overhead applications faster and with a cleaner, more professional finish.
- Weather-Resistant – Whether it’s sweltering summer heat, freezing winter cold, or even extreme temps from -50°C to 180°C, our formula withstands high and low temperatures, UV rays, and moisture—forming an impenetrable seal that shields your vehicle from downpours and humidity, all for long-lasting performance.
- Easy Application – Our polyurethane windshield adhesive comes in a 300ml cartridge compatible with standard caulking guns. It’s ready to use, includes an applicator tip, and just remember to clean the surface before use for smooth, reliable bonding.
- Multipurpose Automotive Adhesive – This auto glass adhesive seamlessly bonds windshields, backlights, sidelights, and glass edges on any vehicle—from cars and trucks to RVs. Designed for both DIY enthusiasts and professional repairs, it’s the go-to solution for durable, leak-proof results every time.
- FAST-CURING WINDSHIELD ADHESIVE — OEM QUALITY BOND — Professional-strength polyurethane formula bonds windshields, rear windows, and side glass with fast-curing adhesive that reaches handling strength in hours, not days. OEM-level performance for auto glass replacement and repair.
- HIGH BOND STRENGTH — WON'T SHRINK OR CRACK — Engineered for permanent, flexible adhesion that holds through temperature swings, road vibration, and weather exposure. The cured seal stays flexible without shrinking or cracking over time — critical for maintaining a watertight windshield.
- WORKS ON VEHICLE & RV GLASS — Use as a windshield sealant, rear view mirror adhesive, or window seal compound on cars, trucks, SUVs, vans, and RVs. Bonds glass to metal, fiberglass, and painted surfaces with equal strength.
- EASY APPLICATION — STANDARD CAULKING GUN COMPATIBLE — Cartridge loads into any standard caulking gun for controlled, even bead placement. No proprietary tools required. Includes disposable nitrile gloves and spreader tool for clean, professional results.
- BLACK URETHANE FORMULA — 10.5 FL OZ — Black color matches OEM windshield sealant lines for factory-appearance repairs. One cartridge provides enough adhesive for a full windshield installation on most vehicles.
Last update on 2026-06-12 / Affiliate links / Images from Amazon Product Advertising API
SEOCONTENT-STARTMay, 2022 * * * IMPORTANT SAFETY RECALL REMINDER * * * According to our records, your 2021 Mustang Mach-E has not had necessary safety recall repairs made. We urge you to have the free repair performed at your local dealership as soon as possible. Recall Number and Description: 21S42 – Panoramic Roof Adhesion What is the issue? On your vehicle, the urethane adhesion of the panoramic roof glass panel to the vehicle body is inadequate. In addition, it is possible that the urethane adhesion of the windshield to the body is inadequate. An inadequately adhered windshield does not conform to the requirements specified by Federal Motor Vehicle Safety Standard (FMVSS) No. 212 Windshield Mounting. Inadequate urethane adhesion of the panoramic roof glass may result in increased wind noise, water leaks, and/or the roof glass may loosen and become detached from the vehicle, creating a road hazard and increasing the risk of a crash. An inadequately adhered windshield may detach in a crash, increasing the risk of injury to occupants. If you have questions or concerns, please contact our Ford Customer Relationship Center at 1-866-436-7332. If you wish to contact us through the Internet, our address is: ford.com/support. Thank you for your attention to this very important matter. Mayo de, 2022 * * * RECORDATORIO IMPORTANTE PROGRAMA DE SEGURIDAD * * * SegUR nuestros registros, no se realizaron en sur 2021 Mustang Mach-E las reparaciones necesarias correspondientes a la campaña de seguridad. Le solicitamos que realice esta reparación gratuita en su distribuidor local lo antes posible. Número y descripción de la campaña: 21S42 – Adhesión del techo panorámico ¿Cuál es el problema? La adhesión de uretano del panel de cristal del techo panorámico con la carrocería de su vehículo es inadecuada. Adicionalmente, es posible que la adhesión de uretano del parabrisa con la carrocería de su vehículo sea inadecuada. Un parabrisa inadecuadamente adherido no cumple con los requisitos especificados por la norma federal de seguridad para vehículos de motor (FMVSS) n.° 212 Soporte del parabrisa. Una adhesión inadecuada del cristal del techo panorámico podría ocasionar mayor ruido de viento, fugas de agua e incluso el cristal se podría aflojar y desprender del vehículo, lo cual genera un peligro en el camino y aumenta el riesgo de choque. Un parabrisa inadecuadamente adherido podría desprenderse en un choque, lo cual aumenta el riesgo de que los ocupantes sufran lesiones. Si tiene dudas o preguntas, comuníquese con nuestro Centro de Relación con Clientes Ford al 1-866-436-7332. Si desea ponerse en contacto con nosotros a través de Internet, nuestra dirección es: ford.com/support. Gracias por su atenciic en este asunto sumamente importante. © Copyright 2022 Ford Motor Company 1 of 2 000000000000003 / 5 / 3 SEE OTHER SIDE FOR OPENING INSTRUCTIONS SEE OTHER SIDE FOR OPENING INSTRUCTIONS REMOVE THESE SIDE EDGES FIRST Š THEN FOLD, CREASE AND TEAR THIS STUB ALONG PERFORATION Š REMOVE THESE SIDE EDGES FIRST Š THEN FOLD, CREASE AND TEAR THIS STUB ALONG PERFORATION Š P.O. BOX 1904 DEARBORN, MI 48121-1904 Presorted STD US Postage PAID R K C 0003468 A / 000000000000003 / 3 ù ù
**************************************************************************************************************
December 2021 Ford Motor Company Ford Customer Service Division P. O. Box 1904 Dearborn, Michigan 48121 1904 © Copyright 2021 Ford Motor Company 1R840 21SC2 RN/DTB121CSC1 Recall Reminder & Added Enhancements This notice applies to: VIN: Dear JOHN A. SAMPLE, You were recently notified of a recall or recalls on your vehicle. As a reminder, full details of the recall/s are in the attached letter. Please consider contacting your dealership at your earliest convenience to have these two recalls completed. To enhance your experience, Ford Motor Company is providing complimentary services to assist with transportation as well as providing software updates while your vehicle is in, to ensure that your Mustang Mach-E is performing at the highest level: Customer Convenience/Transportation: l Rental vehicle at no charge (except for fuel and insurance) while your vehicle is at the dealership for repairs l Vehicle Pick-up & Delivery (at participating dealers) Software Updates While Vehicle is at Dealership: l Ahead of future Ford Power-Up over the air software releases, we have authorized our dealers to perform software updates to deliver several customer enhancements including the following: Improved range in cold weather, Direct Current (DC) fast charge total time improvements, range accuracy, e-latch door robustness, improved phone as a key detection, and other quality improvements. To find a Ford dealer near you, visit Ford.com/dealerships. If you have questions or concerns, please contact our team at the Ford Customer Relationship Center at 866-436-7332 that will be happy to assist you. Thank you for your attention to this important matter. Ford Customer Service Division *Note: The dealer installation of this software is not needed once Ford Power up over the air is available. Dealer installed software updates expire November 2022. 1 of 8 A/1/000001/1 771500491135 A/1/000001/1 JOHN A. SAMPLE 123 SAMPLE ST SAMPLE CITY, MI 12345-6789 Ford Motor Company División de Servicio al Cliente de Ford P. O. Box 1904 Dearborn, Michigan 48121 Diciembre de 2021 Recordatorio de campaña y mejoras añadidas Este aviso se aplica a: VIN: Estimado JOHN A. SAMPLE: Recientemente usted fue notificado de una o varias campañas en su vehículo. A modo de recordatorio, en la carta adjunta aparecen detalles completos de la o las campañas. Le recomendamos que se ponga en contacto con su distribuidor lo antes posible para realizar estas dos campañas. A fin de mejorar su experiencia, Ford Motor Company está ofreciendo servicios complementarios para apoyar con el transporte, así como también actualizaciones de software mientras su vehículo se encuentra con nosotros, a fin de asegurar que su Mustang Mach-E se desempeñe de la mejor manera: Ventaja para el cliente/transporte: l Vehículo de alquiler sin costo (excepto el combustible y el seguro) mientras su vehículo se encuentra en el distribuidor en reparación l Retiro y entrega del vehículo (en distribuidores que participan del programa) Actualizaciones de software mientras el vehículo está en el distribuidor: l Actualizaciones de software OTA de Ford Power-Up, hemos autorizado a nuestros distribuidores a realizar actualizaciones de software a fin de ofrecer varias mejoras al cliente, incluido lo siguiente: Autonomía mejorada en clima frío, mejoras en el tiempo total de carga rápida de corriente continua (CC), precisión de la autonomía, robustez de las puertas con chapa electrónica, detección mejorada de teléfono como llave y otras mejoras de calidad. Para encontrar un distribuidor Ford cerca de usted, visite Ford.com/dealerships. Si tiene dudas o preguntas, comuníquese con nuestro equipo en el Centro de Relación con Clientes Ford al 866-436-7332 y ellos con gusto lo atenderán. Gracias por su atención en este asunto sumamente importante. Ford, División de Servicio al Cliente *Nota: La instalación de este software en el distribuidor no será necesaria una vez que Ford Power up OTA esté disponible. Las actualizaciones de software instaladas en el distribuidor expiran en noviembre de 2022. 2 of 8 A/2/000001/1 1R840 21SC2 RN/DTB121CSC1 © Copyright 2021 Ford, División de Servicio al Cliente 771500491135 A/2/000001/1 JOHN A. SAMPLE 123 SAMPLE ST SAMPLE CITY, MI 12345-6789 December 2021 1R840 21SC2 RN/DTB121CSC1 Ford Motor Company Ford Customer Service Division P. O. Box 1904 Dearborn, Michigan 48121 1904 3 of 8 A/3/000001/1 © Copyright 2021 Ford Motor Company 771500491135 A/3/000001/1 JOHN A. SAMPLE 123 SAMPLE ST SAMPLE CITY, MI 12345-6789 * * * IMPORTANT SAFETY RECALL * * * Safety Recall Notice 21S42 / NHTSA Recall 21V712 Compliance Recall Notice 21C22 / NHTSA Recall 21V711 Your Vehicle Identification Number (VIN): This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Ford Motor Company has decided that a defect which relates to motor vehicle safety exists in your vehicle, with the VIN shown above. Additionally, Ford Motor Company has decided that your vehicle, with the VIN shown above, fails to conform to Federal Motor Vehicle Safety Standard (FMVSS) No. 212 Windshield Mounting. We apologize for this situation and want to assure you that, with your assistance, we will correct this condition. Our commitment, together with your dealer, is to provide you with the highest level of service and support. What are the issues? 21S42 – On your vehicle, the urethane adhesion of the panoramic roof glass panel to the vehicle body is inadequate. 21C22 – In addition, it is possible that the urethane adhesion of the windshield to the body is inadequate. An inadequately adhered windshield does not conform to the requirements specified by Federal Motor Vehicle Safety Standard (FMVSS) No. 212 Windshield Mounting. What are the risks? 21S42 – Inadequate urethane adhesion of the panoramic roof glass may result in increased wind noise, water leaks, and/or the roof glass may loosen and become detached from the vehicle, creating a road hazard and increasing the risk of a crash. 21C22 – An inadequately adhered windshield may detach in a crash, increasing the risk of injury to occupants. What will Ford and your dealer do? Ford Motor Company has authorized your dealer to apply additional urethane adhesive to the panoramic roof glass and have the windshield removed and reinstalled using standard service procedures, free of charge (parts and labor). 1R840 21SC2 RN/DTB121CSC1 How long will it take? The repair time needed for this repair is less than one day. However, due to service scheduling requirements, your dealer may need your vehicle for a longer period of time. Additional time may be required for your dealer to coordinate with a glass installer. In addition, your vehicle may require parts to be ordered. What should you do? Please call your dealer to request a service date for safety recall 21S42 & compliance recall 21C22. Provide the dealer with your VIN, which is printed near your name at the beginning of this letter. Ford has not issued instructions to stop driving your vehicle under these safety & compliance recalls. You should contact your dealer for an appointment to have your vehicle remedied as soon as practicable. You can continue to safely drive your vehicle. If you do not already have a servicing dealer, you can access owner.ford.com for dealer addresses, maps, and driving instructions. Ford Motor Company wants you to have safety recall 21S42 & compliance recall 21C22 completed on your vehicle. The vehicle owner is responsible for making arrangements to have the work completed. Please note: Federal law requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days. NOTE: You can receive information about Recalls and Customer Satisfaction Programs through our FordPass App. The app can be downloaded through the App Store or Google Play. In addition there are other features such as reserving parking in certain locations and controlling certain functions on your vehicle (lock or unlock doors, remote start) if it is equipped to allow control. COVID-19 (CORONAVIRUS) Ford dealerships have implemented enhanced protocols to ensure both your safety and the safety of dealership employees. This includes specific procedures for cleaning and disinfecting customer vehicles before and after each vehicle is serviced. In most places, vehicle service has been deemed a critical service. Please contact your local dealer to confirm current service hours. For more information on how Ford and your local dealer are working hard to keep you on the road during these challenging times, please visit owner.ford.com. Do you need a rental vehicle? Your dealer is authorized to provide a rental vehicle for your personal transportation at no charge (except for fuel and insurance) while your vehicle is at the dealership for repairs. Please see your dealer for guidelines and limitations. Is vehicle Pick-up and Delivery available? 2021 Mustang Mach-E customers affected by these recalls have the option of complimentary Vehicle Pickup & Delivery service (at participating dealers). If you would like to take advantage of complimentary Vehicle Pick-up and Delivery for these recalls, please contact your local dealer to determine if they are participating in the Vehicle Pick-up and Delivery program. © Copyright 2021 Ford Motor Company 4 of 8 A/4/000001/1 1R840 21SC2 RN/DTB121CSC1 What if you no longer own this vehicle? If you no longer own this vehicle, and have an address for the current owner, please forward this letter to the new owner. You received this notice because government regulations require that notification be sent to the last known owner of record. Our records are based primarily on state registration and title data, which indicate that you are the current owner. Can we assist you further? If you have difficulties getting your vehicle repaired promptly and without charge, please contact your dealership’s Service Manager for assistance. RETAIL OWNERS: If you have questions or concerns, please contact our Ford Customer Relationship Center at 1-866-436-7332 and one of our representatives will be happy to assist you. If you wish to contact us through the Internet, our address is: owner.ford.com. For the hearing impaired call 1-800-232-5952 (TDD). Representatives are available Monday through Friday: 8:00AM – 8:00PM (Eastern Time). FLEET OWNERS: If you have questions or concerns, please contact our Fleet Customer Information Center at 1-800-34-FLEET, choose Option #3, and one of our representatives will be happy to assist you. If you wish to contact us through the Internet, our address is: fleet.ford.com. Representatives are available Monday through Friday: 8:00AM – 8:00PM (Eastern Time). If you are still having difficulty getting your vehicle repaired in a reasonable time or without charge, you may write the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave. S.E., Washington, D.C. 20590 or call the toll free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153) or go to safercar.gov. Reference NHTSA Safety Recalls 21V711 & 21V712. Thank you for your attention to this important matter. Ford Customer Service Division © Copyright 2021 Ford Motor Company 5 of 8 A/5/000001/1 6 of 8 A/6/000001/1 1R840 21SC2 RN/DTB121CSC1 * * * CAMPAÑA DE SEGURIDAD IMPORTANTE * * * Aviso de campaña de seguridad 21S42 / Campaña 21V712 de la NHTSA Aviso de campaña de cumplimiento 21C22 / Campaña 21V711 de la NHTSA Número de identificación del vehículo (VIN): Este aviso se le envía de acuerdo con la Ley nacional de seguridad y tránsito de vehículos de EE. UU. Ford Motor Company ha determinado que su vehículo presenta un defecto relacionado con la seguridad del motor, con el VIN que aparece más arriba. Adicionalmente, Ford Motor Company ha determinado que su vehículo, con el VIN que aparece más arriba, no cumple con la norma federal de seguridad para vehículos de motor (FMVSS) n.° 212 Soporte del parabrisa. Lamentamos esta situación y deseamos asegurarle que, con su ayuda, corregiremos el problema. Nuestro compromiso, junto con el de su distribuidor, es ofrecerle servicio y apoyo de alto nivel. ¿Cuáles son los problemas? 21S42 – La adhesión de uretano del panel de cristal del techo panorámico con la carrocería de su vehículo es inadecuada. 21C22 – Adicionalmente, es posible que la adhesión de uretano del parabrisa con la carrocería de su vehículo sea inadecuada. Un parabrisa inadecuadamente adherido no cumple con los requisitos especificados por la norma federal de seguridad para vehículos de motor (FMVSS) n.° 212 Soporte del parabrisa. ¿Cuáles son los riesgos? 21S42 – Una adhesión inadecuada del cristal del techo panorámico podría ocasionar mayor ruido de viento, fugas de agua e incluso el cristal se podría aflojar y desprender del vehículo, lo cual genera un peligro en el camino y aumenta el riesgo de choque. 21C22 – Un parabrisa inadecuadamente adherido podría desprenderse en un choque, lo cual aumenta el riesgo de que los ocupantes sufran lesiones. ¿Qué medidas adoptarán Ford y su distribuidor? Ford Motor Company ha autorizado a su distribuidor a aplicar adhesivo de uretano adicional al cristal del techo panorámico y a retirar y volver a instalar el parabrisa utilizando un procedimiento de servicio estándar, sin costo alguno (piezas y mano de obra). Diciembre de 2021 Ford Motor Company División de Servicio al Cliente de Ford P. O. Box 1904 Dearborn, Michigan 48121 © Copyright 2021 Ford, División de Servicio al Cliente 771500491135 A/6/000001/1 JOHN A. SAMPLE 123 SAMPLE ST SAMPLE CITY, MI 12345-6789 7 of 8 A/7/000001/1 1R840 21SC2 RN/DTB121CSC1 ¿Cuánto tiempo tomará? El tiempo necesario para la reparación es de menos de un día. Sin embargo, debido a los requisitos de planificación de servicio, es posible que su distribuidor tarde un poco más. Podría requerirse tiempo adicional para que el distribuidor coordine con el instalador del cristal. Además, podría ser necesario pedir piezas para su vehículo. ¿Qué debe hacer? Llame a su distribuidor para solicitar una cita de servicio para realizar la campaña de seguridad 21S42 y la campaña de cumplimiento 21C22. Proporcione el VIN a su distribuidor, el cual está impreso debajo de sus datos al comienzo de esta carta. Para estas campañas de seguridad y cumplimiento, Ford no ha emitido instrucciones de dejar de manejar el vehículo. Deberá ponerse en contacto con su distribuidor a fin de programar una cita para solucionar este problema lo más pronto posible. Puede continuar manejando su vehículo con seguridad. Si aún no tiene un distribuidor para realizar el servicio, puede acceder a owner.ford.com para conocer las direcciones de los distribuidores, ver mapas y obtener las instrucciones para llegar. Ford Motor Company le recomienda realizar la campaña de seguridad 21S42 y la campaña de cumplimiento 21C22 en su vehículo. El propietario del vehículo es responsable de realizar los arreglos para llevar a cabo el trabajo. Tenga presente que: La ley federal exige que los arrendadores de vehículos que reciban este aviso de campaña envíen una copia del mismo al arrendatario en un plazo de diez días. NOTA: Puede recibir información sobre las campañas y los programas de satisfacción del cliente a través de la aplicación FordPass. La aplicación se puede descargar a través de App Store o Google Play. Adicionalmente, existen otras funciones como reserva de estacionamientos en determinados lugares, además de control de ciertas funciones en el vehículo (bloqueo o desbloqueo de puertas, arranque remoto) si así está equipado para permitir el control. COVID-19 (CORONAVIRUS) Los distribuidores Ford han implementado protocolos mejorados con el fin de asegurar tanto su seguridad como la de los empleados de los diferentes distribuidores. Esto incluye procedimientos específicos de limpieza y desinfección antes y después de realizar servicio en cada uno de los vehículos de nuestros clientes. En la mayoría de los lugares, la atención de vehículos se ha considerado un servicio esencial. Póngase en contacto con su distribuidor local para confirmar las horas de servicio actuales. Para obtener más información sobre cómo Ford y su distribuidor local están trabajando arduamente para mantenerlo en las calles durante estos tiempos difíciles, visite owner.ford.com. ¿Necesita un vehículo de alquiler? Su distribuidor está autorizado a ofrecerle un vehículo de alquiler para su transporte personal sin costo (excepto el combustible y el seguro) mientras su vehículo se encuentre en reparación. Comuníquese con su distribuidor para conocer las pautas y limitaciones. ¿Está disponible el servicio de retiro y entrega de vehículo? Los clientes de Mustang Mach-E 2021 afectados por estas campañas tienen la opción de obtener el servicio complementario de retiro y entrega de vehículo (en los distribuidores que participan del programa). Si desea obtener el beneficio complementario de retiro y entrega de vehículo para estas campañas, póngase en contacto con su distribuidor local para determinar si ellos están participando en dicho programa. © Copyright 2021 Ford, División de Servicio al Cliente 8 of 8 A/8/000001/1 1R840 21SC2 RN/DTB121CSC1 ¿Qué pasa si usted ya no es el propietario del vehículo? Si usted ya no es el propietario del vehículo y tiene la dirección del propietario actual, le solicitamos que le reenvíe esta carta. Usted recibió este aviso porque las regulaciones del gobierno exigen el envío de notificaciones al propietario conocido más reciente del registro. Nuestros registros se basan principalmente en datos estatales y de propiedad, que indican que usted es el propietario actual del vehículo. ¿Podemos hacer algo más por usted? Si tiene problemas para reparar de inmediato su vehículo y sin costo alguno, comuníquese con el Gerente de Servicio de su distribuidor para solicitar ayuda. PROPIETARIOS MINORISTAS: Si tiene dudas o preguntas, comuníquese con nuestro Centro de Relación con Clientes Ford al 1-866-436-7332 y uno de nuestros representantes con gusto lo atenderá. Si desea comunicarse con nosotros a través de Internet, nuestra dirección es: owner.ford.com. Las personas con problemas de audición pueden llamar al 1-800-232-5952 (TDD). Los representantes atienden de lunes a viernes, de 8:00 a.m. a 8:00 p.m. (hora del este). PROPIETARIOS DE FLOTAS: Si tiene dudas o preguntas, comuníquese con nuestro Centro de Información a Clientes de flotas al 1-800-34-FLEET, elija la opción n.° 3 y uno de nuestros representantes con gusto lo atenderá. Si desea comunicarse con nosotros a través de Internet, nuestra dirección es: fleet.ford.com. Los representantes atienden de lunes a viernes, de 8:00 a.m. a 8:00 p.m. (hora del este). Si aun así tiene problemas para reparar su vehículo en un periodo de tiempo razonable o sin costo, puede escribir al Administrador de National Highway Traffic Safety Administration, 1200 New Jersey Ave. S.E., Washington, D.C. 20590, llamar a la Línea directa de seguridad vehicular al 1-888-327-4236 (TTY: 1-800-424-9153) o visitar safercar.gov. Referencia: Campaña de seguridad 21V711 y 21V712 de la NHTSA. Gracias por su atención en este asunto sumamente importante. Ford, División de Servicio al Cliente © Copyright 2021 Ford, División de Servicio al Cliente
**************************************************************************************************************
October 2021 Ford Motor Company Ford Customer Service Division P. O. Box 1904 Dearborn, Michigan 48121 1904 * * * IMPORTANT SAFETY RECALL * * * Safety Recall Notice 21S42 / NHTSA Recall 21V712 Compliance Recall Notice 21C22 / NHTSA Recall 21V711 Your Vehicle Identification Number (VIN): This notice is sent to you in accordance with the National Traffic and Motor Vehicle Safety Act. Ford Motor Company has decided that a defect which relates to motor vehicle safety exists in your vehicle, with the VIN shown above. Additionally, Ford Motor Company has decided that your vehicle, with the VIN shown above, fails to conform to Federal Motor Vehicle Safety Standard (FMVSS) No. 212 Windshield Mounting. We apologize for this situation and want to assure you that, with your assistance, we will correct this condition. Our commitment, together with your dealer, is to provide you with the highest level of service and support. What are the issues? 21S42 – On your vehicle, the urethane adhesion of the panoramic roof glass panel to the vehicle body is inadequate. 21C22 – In addition, it is possible that the urethane adhesion of the windshield to the body is inadequate. An inadequately adhered windshield does not conform to the requirements specified by Federal Motor Vehicle Safety Standard (FMVSS) No. 212 Windshield Mounting. What are the risks? 21S42 – Inadequate urethane adhesion of the panoramic roof glass may result in increased wind noise, water leaks, and/or the roof glass may loosen and become detached from the vehicle, creating a road hazard and increasing the risk of a crash. 21C22 – An inadequately adhered windshield may detach in a crash, increasing the risk of injury to occupants. What will Ford and your dealer do? Ford Motor Company has authorized your dealer to apply additional urethane adhesive to the panoramic roof glass and have the windshield removed and reinstalled using standard service procedures, free of charge (parts and labor). How long will it take? The repair time needed for this repair is less than one day. However, due to service scheduling requirements, your dealer may need your vehicle for a longer period of time. Additional time may be required for your dealer to coordinate with a glass installer. In addition, your vehicle may require parts to be ordered. What should you do? We anticipate repair instructions and parts ordering information to be available to your dealer on November 15, 2021. Please call your dealer after November 15, 2021, to request a service date for safety recall 21S42 & compliance recall 21C22. Provide the dealer with your VIN, which is printed near your name at the beginning of this letter. Ford has not issued instructions to stop driving your vehicle under these safety & compliance recalls. You should contact your dealer for an appointment to have your vehicle remedied as soon as practicable after November 15, 2021. You can continue to safely drive your vehicle. © Copyright 2021 Ford Motor Company 00200 21SC2/DTB121SC21 1 of 4 A/1/000001/1 771479226272 A/1/000001/1 JOHN A. SAMPLE 123 SAMPLE ST SAMPLE CITY, MI 12345-6789 What should you do? (continued) If you do not already have a servicing dealer, you can access owner.ford.com for dealer addresses, maps, and driving instructions. Ford Motor Company wants you to have safety recall 21S42 & compliance recall 21C22 completed on your vehicle. The vehicle owner is responsible for making arrangements to have the work completed. Please note: Federal law requires that any vehicle lessor receiving this recall notice must forward a copy of this notice to the lessee within ten days. NOTE: You can receive information about Recalls and Customer Satisfaction Programs through our FordPass App. The app can be downloaded through the App Store or Google Play. In addition there are other features such as reserving parking in certain locations and controlling certain functions on your vehicle (lock or unlock doors, remote start) if it is equipped to allow control. COVID-19 (CORONAVIRUS) Ford dealerships have implemented enhanced protocols to ensure both your safety and the safety of dealership employees. This includes specific procedures for cleaning and disinfecting customer vehicles before and after each vehicle is serviced. In most places, vehicle service has been deemed a critical service. Please contact your local dealer to confirm current service hours. For more information on how Ford and your local dealer are working hard to keep you on the road during these challenging times, please visit owner.ford.com. Do you need a rental vehicle? Your dealer is authorized to provide a rental vehicle for your personal transportation at no charge (except for fuel and insurance) while your vehicle is at the dealership for repairs. Please see your dealer for guidelines and limitations. Is vehicle Pick-up and Delivery available? 2021 Mustang Mach-E customers affected by this recall have the option of complimentary Vehicle Pickup & Delivery service (at participating dealers). If you would like to take advantage of complimentary Vehicle Pick-up and Delivery for this recall, please contact your local dealer to determine if they are participating in the Vehicle Pick-up and Delivery program. What if you no longer own this vehicle? If you no longer own this vehicle, and have an address for the current owner, please forward this letter to the new owner. You received this notice because government regulations require that notification be sent to the last known owner of record. Our records are based primarily on state registration and title data, which indicate that you are the current owner. Can we assist you further? If you have difficulties getting your vehicle repaired promptly and without charge, please contact your dealership’s Service Manager for assistance. RETAIL OWNERS: If you have questions or concerns, please contact our Ford Customer Relationship Center at 1-866-436-7332 and one of our representatives will be happy to assist you. If you wish to contact us through the Internet, our address is: owner.ford.com. For the hearing impaired call 1-800-232-5952 (TDD). Representatives are available Monday through Friday: 8:00AM – 8:00PM (Eastern Time). FLEET OWNERS: If you have questions or concerns, please contact our Fleet Customer Information Center at 1-800-34-FLEET, choose Option #3, and one of our representatives will be happy to assist you. If you wish to contact us through the Internet, our address is: fleet.ford.com. Representatives are available Monday through Friday: 8:00AM – 8:00PM (Eastern Time). If you are still having difficulty getting your vehicle repaired in a reasonable time or without charge, you may write the Administrator, National Highway Traffic Safety Administration, 1200 New Jersey Ave. S.E., Washington, D.C. 20590 or call the toll free Vehicle Safety Hotline at 1-888-327-4236 (TTY: 1-800-424-9153) or go to safercar.gov. Reference NHTSA Safety Recalls 21V711 & 21V712. Thank you for your attention to this important matter. Ford Customer Service Division © Copyright 2021 Ford Motor Company 00200 21SC2/DTB121SC21 2 of 4 A/2/000001/1 * * * CAMPAÑA DE SEGURIDAD IMPORTANTE * * * Aviso de campaña de seguridad 21S42 / Campaña 21V712 de la NHTSA Aviso de campaña de cumplimiento 21C22 / Campaña 21V711 de la NHTSA Número de identificación del vehículo (VIN): Este aviso se le envía de acuerdo con la Ley nacional de seguridad y tránsito de vehículos de EE. UU. Ford Motor Company ha determinado que su vehículo presenta un defecto relacionado con la seguridad del motor, con el VIN que aparece más arriba. Adicionalmente, Ford Motor Company ha determinado que su vehículo, con el VIN que aparece más arriba, no cumple con la norma federal de seguridad para vehículos de motor (FMVSS) n.° 212 Soporte del parabrisa. Lamentamos esta situación y deseamos asegurarle que, con su ayuda, corregiremos el problema. Nuestro compromiso, junto con el de su distribuidor, es ofrecerle servicio y apoyo de alto nivel. ¿Cuáles son los problemas? 21S42 – La adhesión de uretano del panel de cristal del techo panorámico con la carrocería de su vehículo es inadecuada. 21C22 – Adicionalmente, es posible que la adhesión de uretano del parabrisa con la carrocería de su vehículo sea inadecuada. Un parabrisa inadecuadamente adherido no cumple con los requisitos especificados por la norma federal de seguridad para vehículos de motor (FMVSS) n.° 212 Soporte del parabrisa. ¿Cuáles son los riesgos? 21S42 – Una adhesión inadecuada del cristal del techo panorámico podría ocasionar mayor ruido de viento, fugas de agua e incluso el cristal se podría aflojar y desprender del vehículo, lo cual genera un peligro en el camino y aumenta el riesgo de choque. 21C22 – Un parabrisa inadecuadamente adherido podría desprenderse en un choque, lo cual aumenta el riesgo de que los ocupantes sufran lesiones. ¿Qué medidas adoptarán Ford y su distribuidor? Ford Motor Company ha autorizado a su distribuidor a aplicar adhesivo de uretano adicional al cristal del techo panorámico y a retirar y volver a instalar el parabrisa utilizando un procedimiento de servicio estándar, sin costo alguno (piezas y mano de obra). ¿Cuánto tiempo tomará? El tiempo necesario para la reparación es de menos de un día. Sin embargo, debido a los requisitos de planificación de servicio, es posible que su distribuidor tarde un poco más. Podría requerirse tiempo adicional para que el distribuidor coordine con el instalador del cristal. Además, podría ser necesario pedir piezas para su vehículo. ¿Qué debe hacer? Esperamos recibir instrucciones para la reparación e información sobre el pedido de piezas el 15 de noviembre de 2021. Llame a su distribuidor después del 15 de noviembre de 2021 para solicitar una cita de servicio para realizar la campaña de seguridad 21S42 y la campaña de cumplimiento 21C22. Proporcione el VIN a su distribuidor, el cual está impreso debajo de sus datos al comienzo de esta carta. Para estas campañas de seguridad y cumplimiento, Ford no ha emitido instrucciones de dejar de manejar el vehículo. Deberá ponerse en contacto con su distribuidor a fin de programar una cita para solucionar este problema tan pronto como sea posible después del 15 de noviembre de 2021. Puede continuar manejando su vehículo con seguridad. 3 of 4 A/3/000001/1 00200 21SC2/DTB121SC21 Octubre de 2021 Ford Motor Company División de Servicio al Cliente de Ford P. O. Box 1904 Dearborn, Michigan 48121 © Copyright 2021 Ford, División de Servicio al Cliente 771479226272 A/3/000001/1 JOHN A. SAMPLE 123 SAMPLE ST SAMPLE CITY, MI 12345-6789 ¿Qué debe hacer? (continuación) Si aún no tiene un distribuidor para realizar el servicio, puede acceder a owner.ford.com para conocer las direcciones de los distribuidores, ver mapas y obtener las instrucciones para llegar. Ford Motor Company le recomienda realizar la campaña de seguridad 21S42 y la campaña de cumplimiento 21C22 en su vehículo. El propietario del vehículo es responsable de realizar los arreglos necesarios para llevar a cabo el trabajo. Tenga presente que: La ley federal exige que los arrendadores de vehículos que reciban este aviso de campaña envíen una copia del mismo al arrendatario en un plazo de diez días. NOTA: Puede recibir información sobre las campañas y los programas de satisfacción del cliente a través de la aplicación FordPass. La aplicación se puede descargar a través de App Store o Google Play. Adicionalmente, existen otras funciones como reserva de estacionamientos en determinados lugares, además de control de ciertas funciones en el vehículo (bloqueo o desbloqueo de puertas, arranque remoto) si así está equipado para permitir el control. COVID-19 (CORONAVIRUS) Los distribuidores Ford han implementado protocolos mejorados con el fin de asegurar tanto su seguridad como la de los empleados de los diferentes distribuidores. Esto incluye procedimientos específicos de limpieza y desinfección antes y después de realizar servicio en cada uno de los vehículos de nuestros clientes. En la mayoría de los lugares, la atención de vehículos se ha considerado un servicio esencial. Póngase en contacto con su distribuidor local para confirmar las horas de servicio actuales. Para obtener más información sobre cómo Ford y su distribuidor local están trabajando arduamente para mantenerlo en las calles durante estos tiempos difíciles, visite owner.ford.com. ¿Necesita un vehículo de alquiler? Su distribuidor está autorizado a ofrecerle un vehículo de alquiler para su transporte personal sin costo (excepto el combustible y el seguro) mientras su vehículo se encuentre en reparación. Comuníquese con su distribuidor para conocer las pautas y limitaciones. ¿Está disponible el servicio de retiro y entrega de vehículo? Los clientes de Mustang Mach-E 2021 afectados por esta campaña tienen la opción de obtener el servicio complementario de retiro y entrega de vehículo (en los distribuidores que participan del programa). Si desea obtener el beneficio complementario de retiro y entrega de vehículo para esta campaña, póngase en contacto con su distribuidor local para determinar si ellos están participando en dicho programa. ¿Qué pasa si usted ya no es el propietario del vehículo? Si usted ya no es el propietario del vehículo y tiene la dirección del propietario actual, le solicitamos que le reenvíe esta carta. Usted recibió este aviso porque las regulaciones del gobierno exigen el envío de notificaciones al propietario conocido más reciente del registro. Nuestros registros se basan principalmente en datos estatales y de propiedad, que indican que usted es el propietario actual del vehículo. ¿Podemos hacer algo más por usted? Si tiene problemas para reparar de inmediato su vehículo y sin costo alguno, comuníquese con el Gerente de Servicio de su distribuidor para solicitar ayuda. PROPIETARIOS MINORISTAS: Si tiene dudas o preguntas, comuníquese con nuestro Centro de Relación con Clientes Ford al 1-866-436-7332 y uno de nuestros representantes con gusto lo atenderá. Si desea comunicarse con nosotros a través de Internet, nuestra dirección es: owner.ford.com. Las personas con problemas de audición pueden llamar al 1-800-232-5952 (TDD). Los representantes atienden de lunes a viernes, de 8:00 a.m. a 8:00 p.m. (hora del este). PROPIETARIOS DE FLOTAS: Si tiene dudas o preguntas, comuníquese con nuestro Centro de Información a Clientes de flotas al 1-800-34-FLEET, elija la opción n.° 3 y uno de nuestros representantes con gusto lo atenderá. Si desea comunicarse con nosotros a través de Internet, nuestra dirección es: fleet.ford.com. Los representantes atienden de lunes a viernes, de 8:00 a.m. a 8:00 p.m. (hora del este). Si continúa con dificultades para reparar su vehículo en un tiempo razonable o sin cargo, le sugerimos que escriba al Administrador, National Highway Traffic Safety Administration, 1200 New Jersey Ave. S.E., Washington, D.C. 20590 o bien que llame sin cargo a la línea directa de seguridad vehicular al 1-888-327-4236 (TTY: 1-800-424-9153) o visite safercar.gov. Referencia: Campaña de seguridad 21V711 y 21V712 de la NHTSA. Gracias por su atención en este asunto sumamente importante. Ford, División de Servicio al Cliente 4 of 4 A/4/000001/1 00200 21SC2/DTB121SC21 © Copyright 2021 Ford, División de Servicio al Cliente
**************************************************************************************************************
Copyright 2021 Ford Motor Company David J. Johnson Ford Motor Company Director P. O. Box 1904 Service Engineering Operations Dearborn, Michigan 48121 Ford Customer Service Division November 15, 2021 TO: All U.S. Ford and Lincoln Dealers SUBJECT: NEW VEHICLE DEMONSTRATION / DELIVERY HOLD – Safety Recall 21S42 Certain 2021 Model Year Mustang Mach-E Vehicles Panoramic Roof Glass Reseal REF: Compliance Recall 21C22 – Dated November 15, 2021 AFFECTED VEHICLES Vehicle Model Year Assembly Plant Build Dates Mustang Mach-E 2021 Cuautitlan February 24, 2020 through June 18, 2021 Affected vehicles are identified in OASIS and FSA VIN Lists. Automatic Closure: For VINs that have both 21C22 AND 21S42 open, both repairs must be completed at the same time. Claim by submitting for payment under 21S42, which will close both FSAs. REASON FOR THIS SAFETY RECALL In some of the affected vehicles, the urethane adhesion of the panoramic roof glass panel to the vehicle body structure may be inadequate. If affected, the roof glass may loosen and could become detached from the vehicle presenting a road hazard. Customers may also experience increased wind noise and water leaks. SERVICE ACTION Parts Availability – Prior to scheduling customer for repairs, ensure the foam seal required for the panoramic roof glass is on site at your dealer. LJ8Z-19B822-AA is expected to start shipping by the end of November 2021. Before demonstrating or delivering any new in-stock vehicles involved in this recall, dealers are to reseal the panoramic glass roof. This service must be performed on all affected vehicles at no charge to the vehicle owner. NOTE: The vehicles in this program also require 21C22 be performed. Check OASIS to confirm FSA 21C22 is open, and if so, refer to the technical instructions to perform both 21C22 and 21S42 as a combined repair procedure. OWNER NOTIFICATION MAILING SCHEDULE Owners were mailed letters the week of October 25, 2021, informing them repair instructions and parts ordering information are anticipated to be available to dealers on November 15, 2021. Dealers should repair any affected vehicles that arrive at their dealerships, whether or not the customer has received a letter. PLEASE NOTE: Federal law requires dealers to complete this recall service before a new vehicle is delivered to the buyer or lessee. Violation of this requirement by a dealer could result in a civil penalty of up to $21,000 per vehicle. Correct all vehicles in your new vehicle inventory before delivery. Copyright 2021 Ford Motor Company ATTACHMENTS Attachment I: Administrative Information Attachment II: Labor Allowances and Parts Ordering Information Attachment III: Technical Information – Body Shop Attachment IV: Technical Information – Glass Company Attachment V: Vehicle Pick-up and Delivery Record Owner Notification Letters QUESTIONS & ASSISTANCE For questions and assistance, contact the Special Service Support Center (SSSC) via the SSSC Web Contact Site. The SSSC Web Contact Site can be accessed through the Professional Technician System (PTS) website using the SSSC link listed at the bottom of the OASIS VIN report screen or listed under the SSSC tab. Sincerely, David J. Johnson Copyright 2021 Ford Motor Company ATTACHMENT I Page 1 of 3 NEW VEHICLE DEMONSTRATION / DELIVERY HOLD – Safety Recall 21S42 Certain 2021 Model Year Mustang Mach-E Vehicles Panoramic Roof Glass Reseal OASIS ACTIVATION OASIS was activated on October 22, 2021. FSA VIN LISTS ACTIVATION FSA VIN Lists were available through https://web.fsavinlists.dealerconnection.com on October 22, 2021. Owner names and addresses were available on November 10, 2021. NOTE: Your FSA VIN Lists may contain owner names and addresses obtained from motor vehicle registration records. The use of such motor vehicle registration data for any purpose other than in connection with this recall is a violation of law in several states, provinces, and countries. Accordingly, you must limit the use of this listing to the follow-up necessary to complete this recall. SOLD VEHICLES Ford has not issued instructions to stop selling/delivering or driving used vehicles under this compliance recall. Owners should contact their dealer for an appointment to have their vehicles remedied as soon as practicable. Owners can continue to safely drive their vehicles. Immediately contact any of your affected customers whose vehicles are not on your VIN list but are identified in OASIS. Give the customer a copy of the Owner Notification Letter (when available) and schedule a service date. Correct other affected vehicles identified in OASIS which are brought to your dealership. Dealers are to prioritize repairs of customer vehicles over repairs of new and used vehicle inventory. STOCK VEHICLES Correct all affected units in your new vehicle inventory before delivery. Use OASIS to identify any affected vehicles in your used vehicle inventory. DEALER-OPERATED RENTAL VEHICLES The Fixing America’s Surface Transportation (FAST) Act law effective June 2016 prohibits a rental company from selling, renting or leasing vehicles subject to a safety or compliance recall. Please consult your legal counsel for legal advice. TITLE BRANDED / SALVAGED VEHICLES Affected title branded and salvaged vehicles are eligible for this recall. OWNER REFUNDS Refunds are not approved for this program. RENTAL VEHICLES Dealers are pre-approved for up to 2 days for a rental vehicle. Follow Extended Service Plan (ESP) guidelines for dollar amounts. Rentals will only be reimbursed for the day(s) the vehicle is at the dealership for part replacement. Prior approval for more than 2 rental day(s) is required from the SSSC. Contact the SSSC via the SSSC Web Contact Site for consideration and approval if appropriate. Copyright 2021 Ford Motor Company ATTACHMENT I Page 2 of 3 NEW VEHICLE DEMONSTRATION / DELIVERY HOLD – Safety Recall 21S42 Certain 2021 Model Year Mustang Mach-E Vehicles Panoramic Roof Glass Reseal PICKUP AND DELIVERY 2021 Mustang Mach-E customers affected by this recall have the option of complimentary Vehicle Pickup & Delivery service (at participating dealers) with a rental for up to 2 days. Claim any additional rental days approved by the SSSC as instructed. Dealers are authorized to claim unique services for completing this program, including: Dealers are authorized to claim one-half labor hour per repair for vehicle pick-up and delivery services. Dealers must retain a Vehicle Pick-up and Delivery Record with the repair order documentation. Refer to the Claims Preparation and Submission section and Attachment IV for details. ADDITIONAL REPAIR (LABOR TIME AND/OR PARTS) Additional repairs identified as necessary to complete the FSA should be managed as follows: For related damage and access time requirements, refer to the Warranty and Policy Manual / Section 6 – Ford & Lincoln Program Policies / General Information & Special Circumstances for FSA’s / Related Damage. For vehicles within new vehicle bumper-to-bumper warranty coverage, no SSSC approval is required, although related damage must be on a separate repair line with the “Related Damage” radio button checked. o Ford vehicles – 3 years or 36,000 miles For vehicles outside new vehicle bumper-to-bumper warranty coverage, submit an Approval Request to the SSSC Web Contact Site prior to completing the repair. CLAIMS PREPARATION AND SUBMISSION Claim Entry: Enter claims using Dealer Management System (DMS) or One Warranty Solution (OWS) online. o When entering claims, select claim type 31: Field Service Action. The FSA number 21S42 is the sub code. o For additional claims preparation and submission information, refer to the Recall and Customer Satisfaction Program (CSP) Repairs in the OWS User Guide. Related Damage/Additional labor and/or parts: Must be claimed as Related Damage on a separate repair line from the FSA with same claim type and sub code as described in Claim Entry above. IMPORTANT: Click the Related Damage Indicator radio button. Rentals: For rental vehicle claiming, follow Extended Service Plan (ESP) guidelines for dollar amounts. Enter the total amount of the rental expense under Miscellaneous Expense code RENTAL. Copyright 2021 Ford Motor Company ATTACHMENT I Page 3 of 3 NEW VEHICLE DEMONSTRATION / DELIVERY HOLD – Safety Recall 21S42 Certain 2021 Model Year Mustang Mach-E Vehicles Panoramic Roof Glass Reseal CLAIMS PREPARATION AND SUBMISSION (continued) Sublet Glass Removal/Installation: Sublet repairs to remove and install the windshield and reseal the panoramic roof can be claimed instead of 21S42C and 21S42E. Sublet documentation must be retained. Submit on the same line as the repair. – Program Code: 21S42 – Misc. Expense: FSAOSL – Misc. Expense: Claim up to $350 Provision for Locally Obtained Supplies: Cleaning supplies, consumables, and either Dow® or Sika® brand automotive glass bonding materials. Submit on the same line as the repair. – Program Code: 21S42 – Misc. Expense: OTHER – Misc. Expense: Claim up to $150 Copyright 2021 Ford Motor Company ATTACHMENT II Page 1 of 3 NEW VEHICLE DEMONSTRATION / DELIVERY HOLD – Safety Recall 21S42 Certain 2021 Model Year Mustang Mach-E Vehicles Panoramic Roof Glass Reseal LABOR ALLOWANCES Description Labor Operation Labor Time Prepare vehicle: Includes time to remove and install headliner, rear view mirror, wiper arms, and cowl. 21S42B 3.1 hours Remove and install windshield using wire method: Includes cleaning current windshield and applying primer to body and window. 21S42C 1.0 Hours Prepare windshield flange: Includes time to protect vehicle, tape, scuff flange, clean flange, tape, and apply epoxy as needed. 21S42D 1.2 Hours Seal panoramic roof: Includes time to protect the interior, clean flange with alcohol, apply primer 2x, install foam, apply urethane. 21S42E 0.9 Hours IPMA camera alignment 21S42F 0.3 Hours Clean Vehicle MT21S42 Up to 0.5 Hours Vehicle Pick-up and Delivery Allowance – NOTE: This allowance is for dealer-performed vehicle pickup/ delivery for dealership repairs only. Can only be claimed once, regardless of outstanding FSA’s repaired. 21S42MM 0.5 Hours PARTS REQUIREMENTS / ORDERING INFORMATION Parts Availability – Prior to scheduling customer in for repairs, ensure the foam seal required for the panoramic roof glass is on site at your dealer. LJ8Z-19B822-AA is expected to start shipping by the end of November 2021. Refer to the FSA landing page on PTS for the latest parts availability timing. To prevent bulk ordering of Panoramic foam seal LJ8Z-19B822-AA, this part number will be on Kcode initially but will be moved to open order as soon sufficient quantities become available. Refer to the FSA landing page on PTS for the latest part ordering information. To place an order for LJ8Z-19B822-AA submit a VIN-specific Part Order contact via the SSSC Web Contact Site. Copyright 2021 Ford Motor Company ATTACHMENT II Page 2 of 3 NEW VEHICLE DEMONSTRATION / DELIVERY HOLD – Safety Recall 21S42 Certain 2021 Model Year Mustang Mach-E Vehicles Panoramic Roof Glass Reseal Part Number Description Order Quantity Claim Quantity LJ8Z-19B822-AA Panoramic foam seal 1 1 Consumables Required for all Vehicles Obtain Locally Masking Tape Claim as MISC OTHER Glass Cleaner Dow BETAPRIME 5504G / Sika Primer-207 or equivalent SikaTack MACH 60 / SikaTack MACH 30 / Dow BETASEAL Express / Sika Tack ASAP Urethane Adhesive or equivalent Roloc Disks or equivalent Isopropyl Alcohol Ford Approved Epoxy Based Primer Related Damage Only Part Numbers LJ8Z-5803100-A Base Windshield VIN Specific – Only if breaks LJ8Z-5803100-H High Series Windshield during removal procedure. PARTS REQUIREMENTS / ORDERING INFORMATION (continued) Dealers will be notified via a DOES II communication if circumstances warrant a change in part supply strategy and when open ordering resumes. To guarantee the shortest delivery time, an emergency order for parts must be placed. Note: Less than 10% of the affected vehicle population is expected to require windshield replacement. DEALER PRICE For latest prices, refer to DOES II. Copyright 2021 Ford Motor Company ATTACHMENT II Page 3 of 3 NEW VEHICLE DEMONSTRATION / DELIVERY HOLD – Safety Recall 21S42 Certain 2021 Model Year Mustang Mach-E Vehicles Panoramic Roof Glass Reseal PARTS RETENTION, RETURN, & SCRAPPING Follow the provisions of the Warranty and Policy Manual, Section 1 – WARRANTY PARTS RETENTION AND RETURN POLICIES. If a replaced part receives a scrap disposition, the part must be scrapped in accordance with all applicable local, state and federal environmental protection and hazardous material regulations. Federal law prohibits selling motor vehicle parts or components that are under safety, compliance, or emissions recall. EXCESS STOCK RETURN Excess stock returned for credit must have been purchased from Ford Customer Service Division in accordance with Policy Procedure Bulletin 4000. REPLACED FSA PARTS INSPECTION AND SIGN OFF Effective March 1st 2021 all parts replaced as part of an FSA repair with a repair order open date of March 1st 2021 or later must be inspected and signed off on the repair order by a member of your dealers fixed operations management team or an employee the task has been delegated to. If the task is to be delegated to a non-management employee, the employee needs to be someone other than the technician who completed the repair and needs to understand the importance of completing this task consistently and accurately. All parts replaced as part of an FSA repair should be returned to the parts department following the Warranty Parts Retention and Return Policies. Inspect the replaced parts to verify the FSA repair was completed. If the FSA repair is found to be complete, the designated employee signs the repair order line or parts return stamp area (electronic or hand signed) for the FSA repair indicating the parts were inspected and validated to have been replaced. REPLACED FSA PARTS INSPECTION AND SIGN OFF (continued) After the parts have been inspected, they should be handled based on the guidance in the parts status report in the Online Warranty System (Hold, Return, CORE, Scrap, etc.). This process is subject to review during warranty audits for FSA repairs with a repair order open date of March 1st 2021 or later. Any eligible FSA claims requiring parts replacement, found not to have been inspected and signed off during a warranty audit will be subject to chargeback and consideration for enrollment into the Dealer Incomplete Recall Repair Process. Note: Other approvals (electronic or handwritten) for add-on repair lines, dealer owned vehicle repairs, and repeat repairs do not qualify as FSA parts inspection approvals. The post repair FSA parts inspection process (electronic or handwritten) is independent from other warranty approval requirements. The approval by the designated employee implies that the FSA parts were found to be replaced and must be able to be clearly identified on the Repair Order. If multiple FSA’s require approval on a single Repair Order, each applicable occurrence will require individual post repair approval by the designated employee. ATTACHMENT III PAGE 1 OF 4 SAFETY RECALL 21S42 CPR © 2021 FORD MOTOR COMPANY DEARBORN, MICHIGAN 48121 11/2021 CERTAIN 2021 MODEL YEAR MUSTANG MACH-E VEHICLES — WINDSHIELD AND PANORAMIC GLASS REATTACHMENT SERVICE PROCEDURE – BODY SHOP INSTRUCTIONS NOTE: These instructions are not intended to be followed from beginning to end. There are several locations where procedures must be completed by other groups before the procedure in these instructions can be resumed. The instructions should be followed in this order. 1. Body Shop Part One – Prepare vehicle for repairs – Steps 1-5 2. Glass Company Part One – Remove windshield – Steps 1-11 as required. 3. Body Shop Part Two – Improve Flange adhesion – Steps 6-13 as required. 4. Glass Company Part Two – Improve panoramic glass and install windshield – Steps 12-27 5. Body Shop Part Three – Calibrate Image Processing Module A – Steps 14-16 BODY SHOP – PART ONE 1. Remove the windshield wiper pivot arms. Please follow Workshop Manual (WSM) procedures in Section 501-16. 2. Remove the cowl panel grille. Please follow WSM procedures in Section 501-02. 3. Remove the headliner. Please follow WSM procedures in Section 501-05. 4. Remove the interior rear view mirror. Please follow WSM procedures in Section 501-09. 5. Disconnect the heated windshield electrical connector and tape the wires to the windshield to prevent damage. See Figure 1. FIGURE 1 21506M ATTACHMENT III PAGE 2 OF 4 SAFETY RECALL 21S42 CPR © 2021 FORD MOTOR COMPANY DEARBORN, MICHIGAN 48121 11/2021 FIGURE 2 PLACE COPY HERE PLACE COPY HERE STUD FOR MISSING NUT STUD FOR MISSING NUT STUD FOR MISSING NUT 21025F ONLY SCUFF THE WINDOW FLANGE URETHANE HAS PEELED CLEANLY FROM THE BODY BODY SHOP – PART TWO 6. Cover/protect the body and interior of the vehicle with a one-time use, disposable drop plastic. 7. Using a scraper, cut the through the urethane bead vertically down to the painted surface to create a starting point. Once reaching the painted surface, pry one side of the bead up with the scraper. Using fingers, work to peel the urethane off the windshield body flange. 8. In areas where the urethane peeled up cleanly, use 400-600 grit sandpaper or a fine Scotch-Brite pad to manually scuff clear coat lightly until it displays a white haze being sure to only abrade the flange. See Figure 2. ATTACHMENT III PAGE 3 OF 4 SAFETY RECALL 21S42 CPR © 2021 FORD MOTOR COMPANY DEARBORN, MICHIGAN 48121 11/2021 12. Apply tape to the edges of the windshield flange to protect the surface of the vehicle. See Figure 4. FIGURE 4 21363A FIGURE 3 PLACE COPY HERE PLACE COPY HERE PLACE COPY HERE STUD FOR MISSING NUT STUD FOR MISSING NUT STUD FOR MISSING NUT 21025G THE URETHANE HAD TO BE CUT TO REMOVE 9. In areas where the urethane did not peel up cleanly, use a Scotch-Brite 3M Roloc disk to remove all remaining urethane from flange while attempting to minimize abrasion to the painted surface. See Figure 3. 10. Clean off the entire windshield flange from all dirt and debris. 11. Using Isopropyl Alcohol and a lint-free cloth, clean off the flange surface. Allow one minute for the Isopropyl Alcohol to evaporate. ATTACHMENT III PAGE 4 OF 4 SAFETY RECALL 21S42 CPR © 2021 FORD MOTOR COMPANY DEARBORN, MICHIGAN 48121 11/2021 BODY SHOP – PART THREE NOTE: Part Three may only be performed once the Glass Company repair procedures have been completed. 14. Remove the protective cover from the vehicle and clean off any dirt and debris. 15. Re-install all previously removed components by reversing steps 1-4. 16. After the windshield has been properly installed and the urethane has dried per the manufacturer’s instructions, carry out the Image Processing Module A (IPMA) Camera alignment using a scan tool. 13. Apply one coat of any Ford approved epoxy based repair primer to any spots where the roloc disk was used to grind off the urethane. Allow time for the primer to dry per the manufacturer’s instructions. See Figure 5. FIGURE 5 PLACE COPY HERE PLACE COPY HERE PLACE COPY HERE STUD FOR MISSING NUT STUD FOR MISSING NUT STUD FOR MISSING NUT 21363B ATTACHMENT IV PAGE 1 OF 11 SAFETY RECALL 21S42 CPR © 2021 FORD MOTOR COMPANY DEARBORN, MICHIGAN 48121 11/2021 CERTAIN 2021 MODEL YEAR MUSTANG MACH-E VEHICLES — WINDSHIELD AND PANORAMIC GLASS REATTACHMENT SERVICE PROCEDURE – GLASS COMPANY INSTRUCTIONS NOTE: These instructions are not intended to be followed from beginning to end. There are several locations where procedures must be completed by other groups before the procedure in these instructions can be resumed. The instructions should be followed in this order. 1. Body Shop Part One – Prepare vehicle for repairs – Steps 1-5 2. Glass Company Part One – Remove windshield – Steps 1-11 as required. 3. Body Shop Part Two – Improve flange adhesion – Steps 6-13 as required. 4. Glass Company Part Two – Improve panoramic glass and install windshield – Steps 12-27 5. Body Shop Part Three – Calibrate Image Processing Module A – Steps 14-16 GLASS COMPANY – PART ONE 1. Apply tape to the perimeter of the windshield to protect from paint damage. See Figure 1. NOTE: Tape off the roof panel near the centerline of the vehicle, where the roof extends forward. When using a piano wire to cut out the glass, the wire will roll over the class A paint in the roof area, once tension is applied to it. If using a nylon style string, this will not damage the paint. FIGURE 1 STUD FOR MISSING NUT 21363C ATTACHMENT IV PAGE 2 OF 11 SAFETY RECALL 21S42 CPR © 2021 FORD MOTOR COMPANY DEARBORN, MICHIGAN 48121 11/2021 2. Remove the windshield using a piano wire cut out tool. See Figure 2 where cutting fiber line was used. 3. Inspect the windshield for possible damage. Is there any damage to the windshield? Yes – Replace the windshield. Proceed to Step 4. No – Re-install the original windshield. Proceed to Step 12. NOTE: Damage to the alignment pins does not require windshield replacement. 4. Use glass cleaner to clean the surface of the new windshield to be installed. FIGURE 2 PLACE COPY HERE PLACE COPY HERE PLACE COPY HERE STUD FOR MISSING NUT STUD FOR MISSING NUT STUD FOR MISSING NUT 21506H FIGURE 3 5. Release the tabs and remove the in-vehicle temperature and humidity sensor. See Figure 3. 21025Z ATTACHMENT IV PAGE 3 OF 11 SAFETY RECALL 21S42 CPR © 2021 FORD MOTOR COMPANY DEARBORN, MICHIGAN 48121 11/2021 6. Re-install the temperature and humidity sensor into the new windshield. 7. Remove the Image Processing Module A (IPMA) Camera. See Figure 4. 1. Release the tab. 2. Release the tab and remove the IPMA camera. FIGURE 4 PLACE COPY HERE PLACE COPY HERE PLACE COPY HERE STUD FOR MISSING NUT STUD FOR MISSING NUT STUD FOR MISSING NUT 21025AA 8. Re-install the IPMA camera into the new windshield. 9. Remove the rain sensor. See Figure 5. 1. Release the retainers. 2. Remove the rain sensor. FIGURE 5 21025AB x2 1 2 ATTACHMENT IV PAGE 4 OF 11 SAFETY RECALL 21S42 CPR © 2021 FORD MOTOR COMPANY DEARBORN, MICHIGAN 48121 11/2021 10. Inspect the rain sensor gel pack for damage. See Figure 6. NOTE: If the rain sensor gel pack is damaged, install a new rain sensor. FIGURE 6 11. Re-install the rain sensor into the new windshield. PLACE COPY HERE PLACE COPY HERE PLACE COPY HERE STUD FOR MISSING NUT STUD FOR MISSING NUT STUD FOR MISSING NUT 21025AC ATTACHMENT IV PAGE 5 OF 11 SAFETY RECALL 21S42 CPR © 2021 FORD MOTOR COMPANY DEARBORN, MICHIGAN 48121 11/2021 GLASS COMPANY – PART TWO NOTE: Part Two may only be performed once the Body Shop repair procedures to the window flange have been completed. 12. Shave down the urethane on the original windshield until there is 1mm remaining. See Figure 7. FIGURE 7 PLACE COPY HERE PLACE COPY HERE PLACE COPY HERE STUD FOR MISSING NUT STUD FOR MISSING NUT STUD FOR MISSING NUT 21025B 13. Apply two coats of urethane body flange primer according to the manufacturer’s instructions to the entire windshield body flange at the urethane location. Additionally, apply two coats of window primer at any location where the clearcoat or paint layers have been damaged to provide environmental protection. Allow dry time between each coat applied. Material: Sika® Aktivator PRO / Dow® BETAPRIME™ 5504G / Sika® Primer-207 14. Apply window primer according to the manufacturer’s instructions to the new windshield. Allow dry time. Material: Sika® Aktivator PRO / Dow® BETAPRIME™ 5504G / Sika® Primer-207 NOTE: This step only applies when replacing the windshield. 15. Apply window primer according to the manufacturer’s instructions to the fixed glass anywhere the urethane adhesive was completely removed. Allow dry time. Material: Sika® Aktivator PRO / Dow® BETAPRIME™ 5504G / Sika® Primer-207 NOTE: This step only applies when reusing the original windshield. ATTACHMENT IV PAGE 6 OF 11 SAFETY RECALL 21S42 CPR © 2021 FORD MOTOR COMPANY DEARBORN, MICHIGAN 48121 11/2021 17. Repeat step 16 on both the rear bow and the side rails. See Figures 9 and 10. FIGURE 9 STUD FOR MISSING NUT STUD FOR MISSING NUT STUD FOR MISSING NUT 21506C FIGURE 10 21506D FIGURE 8 PLACE COPY HERE PLACE COPY HERE PLACE COPY HERE STUD FOR MISSING NUT STUD FOR MISSING NUT STUD FOR MISSING NUT 21506B 16. Using Isopropyl Alcohol and a clean lint-free cloth or moistened dobber, clean the flange in the area where the primer is to be applied along the front header flange of the panoramic roof. See Figure 8. NOTE: The tape is for locational reference only. It is not required to apply tape before cleaning the flange. ATTACHMENT IV PAGE 7 OF 11 SAFETY RECALL 21S42 CPR © 2021 FORD MOTOR COMPANY DEARBORN, MICHIGAN 48121 11/2021 FIGURE 12 21506E 19. Repeat step 18 on both the rear and the side rails. NOTE: Please follow the website link https://bcove.video/3vaAI6C for applying the primer at the rear bow. Driver side shown, passenger side similar. 20. Using a 3M P.A.-1 hand applicator or similar tool, install one of the two extruded foam seal strips between the front header flange and the roof glass at a depth of 1/2″-1″ (12-25mm). See Figures 12 and 13. NOTE: The foam seal may extend past where the primer was applied. See Figure 14. 18. Apply two coats of urethane body flange primer according to the manufacturer’s instructions using a dauber to the front header. Allow dry time between each coat applied. See Figure 11. Material: Sika® Aktivator PRO / Dow® BETAPRIME™ 5504G / Sika® Primer-207 FIGURE 11 PLACE COPY HERE PLACE COPY HERE PLACE COPY HERE STUD FOR MISSING NUT STUD FOR MISSING NUT STUD FOR MISSING NUT 21506F ATTACHMENT IV PAGE 8 OF 11 SAFETY RECALL 21S42 CPR © 2021 FORD MOTOR COMPANY DEARBORN, MICHIGAN 48121 11/2021 21. Using the second foam seal, cut two 5 inch long strips and install each strip between the rear bow and the roof glass. See Figures 15 and 16. FIGURE 15 STUD FOR MISSING NUT 21506A FIGURE 13 PLACE COPY HERE PLACE COPY HERE PLACE COPY HERE STUD FOR MISSING NUT STUD FOR MISSING NUT STUD FOR MISSING NUT 21506G FIGURE 14 PLACE COPY HERE PLACE COPY HERE PLACE COPY HERE STUD FOR MISSING NUT STUD FOR MISSING NUT STUD FOR MISSING NUT 21506K ATTACHMENT IV PAGE 9 OF 11 SAFETY RECALL 21S42 CPR © 2021 FORD MOTOR COMPANY DEARBORN, MICHIGAN 48121 11/2021 STUD FOR MISSING NUT STUD FOR STUD FOR MISSING NUT 21025AD 22. Cut the urethane adhesive applicator tip to specification. See Figure 17. Material: Sika® SikaTack® MACH 60 / Sika® SikaTack® MACH 30 / Dow® BETASEAL™ Express Material: Sika Tack ASAP Urethane Adhesive FIGURE 17 23. Apply a urethane adhesive bead. See Figure 18. 1. Start and end at the original overlap points to prevent air and water leaks. 2. Apply a urethane adhesive bead 14 mm (0.551 in) high and 8 mm (0.314 in) wide on top of the existing trimmed urethane adhesive bead on the pinch weld. 3. Make sure there are no gaps in the bead. NOTICE: Make sure the urethane bead is uniform to prevent air and water leaks. NOTE: The fixed glass must be installed within 10 minutes of applying the urethane adhesive. NOTE: Use a power caulk gun that applies the urethane adhesive with less effort and a continuous bead. FIGURE 16 PLACE COPY HERE PLACE COPY HERE PLACE COPY HERE STUD FOR MISSING NUT STUD FOR MISSING NUT STUD FOR MISSING NUT 21506L ATTACHMENT IV PAGE 10 OF 11 SAFETY RECALL 21S42 CPR © 2021 FORD MOTOR COMPANY DEARBORN, MICHIGAN 48121 11/2021 24. Open the vehicle windows to prevent the air pressure of closing doors from compromising the urethane adhesive bond. NOTICE: The door windows must be left open during the adhesive curing time. 25. Install the fixed glass to the vehicle. 1. Install the fixed glass, pressing firmly by hand to ensure a good bond. 2. Secure the fixed glass in the correct position with tape until the urethane adhesive has cured. 26. Apply urethane adhesive between the glass on both front and rear headers using the foam seal as a back stop to ensure the urethane wets out to both the flange and the glass. See Figures 19 and 20. NOTE: If tape was applied for locational reference, be sure to remove the tape directly after urethane application. FIGURE 19 21506J FIGURE 18 PLACE COPY HERE PLACE COPY HERE PLACE COPY HERE STUD FOR MISSING NUT STUD FOR MISSING NUT STUD FOR MISSING NUT 21025AE ATTACHMENT IV PAGE 11 OF 11 SAFETY RECALL 21S42 CPR © 2021 FORD MOTOR COMPANY DEARBORN, MICHIGAN 48121 11/2021 FIGURE 20 PLACE COPY HERE PLACE COPY HERE PLACE COPY HERE STUD FOR MISSING NUT STUD FOR MISSING NUT STUD FOR MISSING NUT 21506I 27. Repeat step 26 for the roof’s side rails using the urethane as a back stop to acquire adhesive wet out to both the glass and the flange. WARNING: Do not drive vehicle until the urethane adhesive seal has cured. Follow urethane adhesive manufacturer’s curing directions. Inadequate or incorrect curing of the urethane adhesive seal will adversely affect glass retention. Failure to follow these instructions may result in serious injury to vehicle occupant(s). ATTACHMENT V Page 1 of 1 NEW VEHICLE DEMONSTRATION / DELIVERY HOLD – Safety Recall 21S42 Certain 2021 Model Year Mustang Mach-E Vehicles Panoramic Roof Glass Reseal MOBILE REPAIR / VEHICLE PICK-UP AND DELIVERY RECORD VIN ____________________________ received (check one): ☐ Mobile Repair ☐ Pick-up and/or delivery service As outlined below for the 21S42 Field Service Action program. ☐ Mobile Repair – Date: _______________ OR ☐ Pick-up – Date: _______________ ☐ Delivery – Date: _______________ Repair Order # Repair Order Date Service Manager Signature Date
**************************************************************************************************************
Copyright 2021 Ford Motor Company David J. Johnson Ford Motor Company Director P. O. Box 1904 Service Engineering Operations Dearborn, Michigan 48121 Ford Customer Service Division October 22, 2021 TO: All U.S. Ford and Lincoln Dealers SUBJECT: NEW VEHICLE DEMONSTRATION / DELIVERY HOLD – Advance Notice – Safety Recall 21S42 Certain 2021 Model Year Mustang Mach-E Vehicles Panoramic Roof Glass Reseal AFFECTED VEHICLES Vehicle Model Year Assembly Plant Build Dates Mustang Mach-E 2021 Cuautitlan February 24, 2020 through June 18, 2021 Affected vehicles are identified in OASIS and FSA VIN Lists. REASON FOR THIS SAFETY RECALL In some of the affected vehicles, it may be possible there is inadequate urethane adhesion of the panoramic roof glass panel to the vehicle body structure. If affected, the roof glass may loosen and could become detached from the vehicle presenting a road hazard. Customers may also experience increased wind noise and water leaks. SERVICE ACTION DO NOT DEMONSTRATE OR DELIVER any new in-stock vehicles involved in this safety recall. A complete Dealer Bulletin will be provided to dealers the week of November 15, 2021, when it is anticipated that parts ordering information and repair instructions will be available to support this safety recall. IMPORTANT: Dealers should open a Repair Order (RO) only when a full dealer bulletin is published. Opening an RO against an Awareness or Advance Notice will result in warranty rejections against a recall. CUSTOMER NOTIFICATION Owners of record will be notified via first-class mail, starting October 27, 2021, informing them repair instructions and parts ordering information are anticipated to be available to dealers on November 15, 2021. PLEASE NOTE: Federal law requires dealers to complete this recall service before a new vehicle is delivered to the buyer or lessee. Violation of this requirement by a dealer could result in a civil penalty of up to $21,000 per vehicle. Correct all vehicles in your new vehicle inventory prior to delivery. Copyright 2021 Ford Motor Company QUESTIONS & ASSISTANCE For questions and assistance, contact the Special Service Support Center (SSSC) via the SSSC Web Contact Site. The SSSC Web Contact Site can be accessed through the Professional Technician System (PTS) website using the SSSC link listed at the bottom of the OASIS VIN report screen or listed under the SSSC tab. Sincerely, David J. Johnson
SEOCONTENT-END
This product presentation was made with AAWP plugin.