NHTSA ID Number: 10109047
Manufacturer Communication Number: TSB 16-0129
Summary
Some 2011-2016 Fiesta and 2012-2016 Focus vehicles equipped with a DPS6 transmission may exhibit intermittent concerns of loss of transmission engagement while driving, intermittent no start or a loss of power. These symptoms are usually accompanied by an illuminated Check Engine lamp. Additional symptoms may include messages in the message center indicating hill start assist is not available, that parking aid malfunction/service is required or the transmission PRNDL/S gear selector on the instrument cluster may flash. Diagnostic trouble codes (DTCs) U0100, U0101, U1013 and/or P0606 will be present or stored in the powertrain control module (PCM) memory. Follow the Service Procedure steps to correct the condition.
FORD
:
2011-2016 Fiesta
2012-2016 Focus
This article supersedes TSB 16-0044 to update the Title, Issue Statement, Service Procedure and Part List.
ISSUE:
Some 2011-2016 Fiesta and 2012-2016 Focus vehicles equipped with a DPS6 transmission may exhibit intermittent concerns of loss of transmission engagement while driving, intermittent no start or a loss of power. These symptoms are usually accompanied by an illuminated check engine lamp. Additional symptoms may include messages in the message center indicating hill start assist is not available, that parking aid malfunction/service is required or the transmission PRNDL/S gear selector on the instrument cluster may flash. Diagnostic trouble codes (DTCs) U0100, U0101, U1013 and/or P0606 will be present or stored in the powertrain control module (PCM) memory.
ACTION:
Follow the Service Procedure steps to correct the condition.
SERVICE PROCEDURE
With the release of Customer Satisfaction Program 15B22 if a vehicle is being serviced using this article, the PCM/transmission control module (TCM) reprogramming and clutch adaptive learn strategy updates required in 15B22 are completed. Therefore, it is not necessary to perform 15B22 separately and 15B22 should not be claimed. It will be closed when the labor operations for this article are claimed.
- Is the vehicle a Focus built on or before 5-Nov-2015 or a Fiesta built on or before 27-Oct-2015?
- Yes – proceed to Step 3.
- No – proceed to Step 2.
- Is the vehicle a Focus built on 6-Nov-2015 and through 9-Mar-2016 or a Fiesta built on 28-Oct-2015 and through 27-Jul-2016?
- Yes – proceed to Step 5.
- No – this article does not apply. Refer to Workshop Manual (WSM), Section 307-01 for normal diagnostics.
- Does the customer indicate at least one of the following concerns are present: Intermittent loss of transmission engagement while driving, intermittent no start, intermittent loss of power, Hill Start Assist is Not Available or Parking Aid Malfunction/Service is required displayed in the instrument panel cluster (IPC) message center and/or transmission PRNDL/PRNDS gear selector on the instrument cluster flashes?
- Yes – proceed to Step 4.
- No – proceed to step 5.
- Connect Integrated Diagnostic System (IDS) service tool or an equivalent scan tool, check for DTCs. Are DTCs U0100, U0101, U1013, and/or P0606 present or stored in the PCM/TCM memory?
- Reprogram the PCM/TCM with the latest calibrations using IDS release 102.01 or higher. Make sure you are connected to the internet when entering module programming to obtain the latest updates. Calibration files may also be obtained at www.motorcraftservice.com.
- This calibration installs DTC P0606 a new TCM internal failure code. Refer to WSM Section 307-01 as required. Always resolve any vehicle low voltage concerns before replacing a TCM.
- Perform the TCM adaptive learn strategy.
- Adjust the vehicle clock as it may have lost time during the reprogramming process.
| PART NUMBER | PART NAME |
AE8Z-7Z369-F
Dasbecan Programmed TCM TCU Transmission Control Module Unit Compatible with 2011-2022 Ford Focus Replace A2C53377498 AE8Z-7Z369-F (Focus 2.0L)
| Transmission Control Module Kit |
16 Affected Products
Vehicles
1 Associated Document
Manufacturer Communications
TSB 16-0129
MC-10109047-9999.pdf 102.463KB
NHTSA ID Number: 10205009
Manufacturer Communication Number: TSB160044
Summary
DPS6 – no start and/or transmission engagement or loss of power with DTCS u0100, U00101, U1013, U3003 AND/OR P0606
1 Associated Document
Manufacturer Communications
TSB 16-0044
MC-10205009-9999.pdf 102.864KB
Reprogramming
Service Information & Reprogramming
Module Reprogramming
| Diagnostic Software | Interface Device | Complete Vehicle Diagnostics | Module Programming | ||
| 1996-2017 Model Year |
2018-Present Model Year |
1996-2017 Model Year |
2018-Present Model Year |
||
| IDS/FDRS | VCM, VCM II, VCMM |
X | X | X | X |
| FJDS/FDRS | Compatible J2534 Devices (Including VCM II and VCMM) |
X | X | X | |
Detailed system requirements, installation, and support information for each product is located under the diagnostics tool support tab for each product.
Integrated Diagnostic Software (IDS) / Ford Diagnosis & Repair System (FDRS)
For use with VCM I, VCM II, VMM and VCMM hardware devices only. The complete factory Ford Motor Company vehicle diagnostic tool that provides complete dealership level vehicle diagnostic coverage for all 1996 to present Ford, Lincoln and Mercury vehicles. The IDS software includes time based access to the IDS software, software updates and calibration files.
Ford J2534 Diagnostic Software (FJDS) / Ford Diagnosis & Repair System (FDRS)
For use with compatible J2534 hardware devices. FJDS software provides Ford Module Programming functionality that covers 1996 to present Ford, Lincoln and Mercury module reprogramming functions, plus complete dealership level vehicle diagnostic software for all 2018 to present Ford and Lincoln vehicles. The FJDS software license includes time based access to the FJDS software, software updates and calibration files.
Latest Calibration Information
Module Build Data (As-Built)
Use VIN to obtain As-Built data
- J2534 Pass-Thru Programmer: TOPDON RLink J2534 is an advanced diagnostic and reprogramming tool that support all J2534 protocols, as well as D-PDU, CAN-FD and DoIP, ensuring compatibility with a wide range of modern vehicles. It offers extensive versatility with support for over 18 major automotive brands, including Chrysler, Ford, GM, Nissan, Toyota, Honda, Subaru, Land Rover/Jaguar, Volvo, Wuling, Volkswagen/Audi, Mercedes-Benz, and BMW. NOTE: Not compatible with Ford IDS diagnostic software
- All-in-One OEM Diagnostics: This J2534 ECU programming tool elevates your automotive repair capabilities to new heights by delivering complete OEM diagnosis. Boasting comprehensive full-system diagnostics, intuitive repair guides, advanced ECU programming and coding, common reset services, a vast library of repair information and more, this all-in-one solution empowers technicians to effortlessly tackle complex vehicle issues with ease. *Not compatible with 24V vehicles
- Proven Performance You Can Trust: Backed by over 10000 real vehicle tests and benefit from a wealth of practical experience, this OEM reprogramming tool guarantees stable and exceptional performance. Supported by TOPDON's dedicated technical experts with in-depth knowledge of both auto repair and J2534 Pass-Thru programming, the RLink J2534 provides prompt and professional assistance, ensuring a smooth setup and reliable compatibility
- Integrated Excellence, Always Up-to-Date: Featuring the exclusive RLink Platform to provide a streamlined experience with one-click driver installation and management, ensuring flawless integration with your OE software, maintaining the original performance quality. The built-in operation guide makes mastering OE software quick and easy, so you can get started right away. Plus, with lifetime free updates, your diagnostics will stay current with the latest drivers and innovations
- Efficiency Meets Versatility: Engineered to support three CAN channels simultaneously - CAN FD and CAN-CC included, giving you the edge in fast troubleshooting. To perfectly synchronized with the OE software, please diagnose with active subscriptions and make sure your computer system is running a compatible 64-bit Windows version (7, 8, 10 or later) to fully leverage the power of RLink J2534. *We don't provide extra OE software
- Advanced VCI Box, Industry-leading J2534 Pass-Thru Technology: This J2534 Pass-Thru Programmer is designed espically for technicians, independent shop owners, and DIY enthusiasts, enables fast, reliable computer-based programming. It supports all J2534 protocols—including the latest DoIP and CAN FD—ensuring full compatibility with both legacy and next-generation vehicles.
- High-Speed OEM-Level Diagnostics & Programming: Unlock true OEM functionality with comprehensive system diagnostics, guided troubleshooting, coding, adaptations, resets, and programming—all designed to slash repair time. This all-in-one tool eliminates the need for multiple OEM devices, boosting efficiency and cutting costs. Equipped with High-Speed USB, it delivers 10x more data per second than competing solutions
- Coverage for 17 Car Brands & Ultra Reliability: Works seamlessly for Chrysler, for Ford(Forscan), for GM, for Nissan, for Toyota, for Honda, for Subaru(SSM4), for Land Rover/Jaguar, for Volvo, for Wuling, for Volkswagen, for Mercedes-Benz, and for BMW. Backed by over 10000 real vehicle tests and benefit from a wealth of practical experience, this OEM reprogramming tool guarantees stable and exceptional performance
- User-Friendly RLink Platform & Expert Support: TOPDON’s proprietary driver management platform offers a clean interface and lifetime free updates. Access a rich library of real-world case studies to stay ahead of the curve. Backed by a support team with 10+ years of J2534 and automotive repair experience, we provide one-on-one assistance to resolve any technical issue.
- 6.6 ft USB-C Cable & Portable Storage Case: The RLink J2534 diagnostic tool features a 6.6ft USB 2.0 Cable and a 1.2 ft OBDII Extension Cable, allows to connection your computer easily outside the vehicle. The included handled carry case offers easy portability, storage, and hanging options—keeping your gear clean and ready to go, anywhere.
- Upgraded Connector Design: The connector has been changed to prevent previous issues. If you bought the earlier model and encountered problems, message us for a hassle-free replacement—we've got you covered
- Made for GM, Ford & Chrysler Dealer-Level Access - Gain OEM-level diagnostics, ECU programming, coding, and bidirectional control with official OE software. Perform system resets and module customization across The Big 3 from one compact OBD2 to USB GM, Chrysler, and Forscan tool. *Does not support ECU diagnostics and programming for GM vehicles using DoIP protocol. Please verify compatibility before purchase
- Supports 8+ OE Software Platforms with One Tool - Work seamlessly across Forscan, FJDS, FDRS, Tech2Win, SPS 2, Techline, GDS2, and Witech 2.0. This J2534 pass-thru device lets you switch between platforms in seconds, streamlining workflow and reducing hardware costs. *No OE Software Provided, OE diagnostic software require separate subscriptions
- Reliable Forscan Adapter for Ford Diagnostics - The RLink X3 is a pro-grade Forscan OBD2 adapter, providing a stable connection for Ford, Lincoln, Mazda, and other Forscan software vehicles. Ideal for programming, module coding, and advanced vehicle configuration
- Broad Coverage for 2006 to 2025 GM, Ford & Chrysler Vehicles - Equipped with J2534 and CAN-FD protocols, this OBD2 connector supports model-year 2006 and newer vehicles. Handle the latest CAN-FD control systems with full compatibility across GM, Ford, and Chrysler platforms
- 💯【Conta.ct us for Support Directly】For any issues experienced after purchase, please reach out to: 📞autelsupply@ outlook. com🛣️. Our team will provide perfect solution for you. For tech support or [explore additional accessory], please cont.act our team: 📞autelsupply@ outlook. com🛣️.
- 🌎【Autel J2534 Pass-Thru Progra.mmer】As an OEM Pass-Thru Progra.mmer Vehicle interface for multiple makes, Autel MaxiFlash J2534 support all J2534 protocols, D-PDU, CAN-FD and DoIP protocols. 2026 newer Autel MaxiFlash J2534 VCI can works with P-C and download OEM vehicle software, seamlessly conduct OE-level diagnostic-progra.mming-c0ding. Also, Work with Elite II Pro/ Ultra Lite/ MS909/ MS909CV/ MS909EV to directly pro.gram on Merce.des-Be.nz & BM.W. Autel J2534 Progr.ammer is a multi-functional device and supports 10+ major brands, including for Hond.a, G.M, LandRo.ver, BM.W, Chrysl.er, For.d, Hyun.dai, Ki.a, Merc.edes B.enz, Toyot.a, Volksw.agen etc.
- 🌎【Enhanced Protocol: J2534/D-PDU/RP1210/CAN FD/DoIP】Autel MaxiFlash JVCI is a blueto.oth communicate device, it supports latest CAN FD DoIP CAN protocols, compliant with automotive D-PDU/ J2534/ RP1210 standards. It can perform standard PassThru J2534 functions: compatible with Toyota Techstream, Volvo VIDA, Honda HDS, Jaguar Land Rover IDS and BM.W 3G for OEM diagnostics. CAN FD protocol is mainly for GM 2019+, DoIP protocol is mainly for Volvo 2018+, for L-and Rover/for Jaguar 2017+, for BM.W F chassis and G chassis.
- 🌎【Compatible with P-C/ WIND.OWS 】The Autel J2534 VCI can be connected to a compu.ter via a data cable; once the corresponding OEM software is installed, it enables do advanced progr.amming and c0ding on your vehicles. Easy Steps: 1) Connect to P-C via a USB cable 2) download OEM vehicle software 3) Start Diagnose. Take For.d for example, you can download OEM software on mot.orcraft.erservi.ce website, such as: For.d Diagnostic Software downloads, As B.uilt Data, Updated Cali.bration information, then use different software do relevant features.
- 🌎【Work with Autel Elite II Pro/ Ultra Lite/ MS909/ MS909CV/ MS909EV】This 2026 latest Autel J2534 Pass-Thru VCI is 100% compatible with Autel Elite II Pro Ultra Lite MS909 MS909CV MS909EV to perform advanced functions from diagnose to progra.mming.
- ALL OF THE J2534 PROTOCOLS - This single unit has all of the protocols you need for your OEM J2534 reprogramming and diagnostics including the latest in DoIP and CanFD
- J2534 TECHNICAL SUPPORT - FREE for the life of the tool. Staffed by technicians who understand vehicle repair and J2534 Pass‑thru
- TOOLBOX WITH OEM APPLICATION DESCRIPTIONS - educational video tutorials and real-time news – Giving you the confidence and up-to-date knowledge to get the job done
- J2534 v05.00 API - The newest version of J2534 to give you the latest in pass-thru technology
- FUTURE PROOF WITH 4 CAN CHANNELS - Going beyond the 3 required by select Chrysler/FCA models, CarDAQ-Plus 3 also provides a 4th to meet the needs of future OEM applications
- Dual WiFi & 10.1" Touchscreen: Provides a stable, high-speed wireless link 3x faster than bluetooth, and a responsive, professional interface. Topdon ONE obd2 scanner diagnostic tool ensures smooth, non-lagging diagnostic scan, boosting mechanic efficiency
- J2534 Pass-Thru Support: The included ONE VCI supports the J2534 standard, allowing it to function as a pass-thru device when paired with OEM diagnostic software.Through TOPDON’s RLink platform, technicians can perform dealer-level coding, expanding in-house capabilities without investing in multiple factory automotive scan tools
- OE Topology Mapping: Visualize the vehicle’s ECU network exactly as it’s built.Zoom, pan, and highlight specific modules to pinpoint component issues with precision.Topology mapping displays real-time communication between modules
- 50 Plus Service Functions: Covers high-demand services like ADAS calibration, DPF regen, TPMS reset, ABS bleed, and throttle adaptation.Expands your service menu, allows you to charge premium rates, and turns away zero jobs due to lack of tooling. Vehicle-specific functionality may vary
- ECU Coding & Hidden Feature Activation for BMW, Benz & VW: Enables module replacement, feature customization, and personal settings with automatic backup or restore.Lets your shop safely offer high-margin customization services, attracting more customers and boosting profit
SEOCONTENT-START
DPS6 – NO START AND/OR TRANSMISSION ENGAGEMENT LOSS OF POWER WITH DTCS U0100, U0101, U1013 AND/OR P0606 Publication Date: September 26, 2016
OPERATION DESCRIPTION TIME 160129A 2011-2016 Fiesta, 2012-2016 Focus Automatic Transmission (DPS6): Retrieve DTCs, Reprogram The PCM/TCM And Perform The Clutch Adaptive Learning (Do Not Use With Any Other Labor Operations) 0.6 Hr. 160129B 2011-2016 Fiesta With Automatic Transmission (DPS6): Retrieve DTCs, Replace The TCM, Reprogram The PCM/TCM, Perform The Clutch Adaptive Learning Procedure And Clear DTCs (Closes FSA 15B22 If Open, Do Not Use With Any Other Labor Operation) 1.1 Hrs. 160129C 2012-2016 Focus With Automatic Transmission (DPS6): Retrieve DTCs, Replace The TCM, Reprogram The PCM/TCM, Perform The Clutch Adaptive Learning Procedure And Clear DTCs (Closes FSA 15B22 If Open, Do Not Use With Any Other Labor Operation) 1.0 Hr. WARRANTY STATUS Eligible Under Provisions Of New Vehicle Limited Warranty Coverage And Emissions Warranty Coverage. Warranty/ESP coverage limits/policies/prior approvals are not altered by a TSB. Warranty/ESP coverage limits are determined by the identified causal part and verified using the OASIS part coverage tool. DEALER CODING BASIC PART NO. CONDITION CODE 7Z369 04
**************************************************************************************************************
SEOCONTENT-END
Last update on 2026-05-28 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.
compre un ford focus en estados unidos y estoy en republica dominicana aqui el dealer autorizado es Grupo Viamar me refieren que no me cubre en mi pais la garantia y tengo mi vehiculo parado puesto que le sucede exactamente lo descrito en este tutotorial no se que hacer por estoy desesperado
I have been having issues with my 2014 Ford Focus which was purchased from a Dealer in Jamaica. The vehicle has been jerking/bucking, running back while on a slope, overheating, losing power among other problems. I have had to take the vehicle in for repairs 3 times in the space of one week and it is still stuttering.
Kindly let me know who I should contact regarding this matter as I am extremely frustrated and disappointed with the service from Kingston Industrial Garage.
Thank you.
I’m afraid you will have to find another shop or dealer.