April 3, 2019 NHTSA CAMPAIGN NUMBER: 19V269000
If the brake lights incorrectly illuminate, it can confuse other drivers, possibly increasing the risk of a crash.
NHTSA Campaign Number: 19V269
Manufacturer Weis Fire & Safety
Components EXTERIOR LIGHTING
Potential Number of Units Affected 1
Weis Fire & Safety is recalling one 2018 Emergency vehicle built on a Ford F-550 4×4 Crew Cab chassis and equipped with Whelen brake lights recalled under 18E-063. Depending on the specific wiring of the vehicle, these brake lights may illuminate when the brake pedal has not been pressed.
Weis Fire & Safety has already notified the owner, and replaced the brake lights, free of charge. The recall began October 1, 2018. Owners may contact Weis Fire & Safety customer service at 1-785-825-9526.
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
1 Affected Product
2 Associated Documents
Non-Compliance Notice 573 Report/FMVSS 108
- Twice the life of standard incandescent bulbs
- Best value
- Original equipment quality seal for the most reliable performance
- Always replace in pairs to ensure a symmetric light beam from both bulbs on the road. Bulbs dim over time.
- Miniature bulbs by Philips, for over 100 years we have been continuously innovating automotive lighting
- (Set of 2) Chips: 39 pieces high quality,high power with high illumination led chips per 7440 7443 red led bulb ---360 degree full angle illumination with projector lens design
- Color: Brilliant pure red;Working Voltage: 12V~18V with built in IC driver for better working performance;
- Fitment: replace the bulb harness of 992, 7440A, 7440AL, 7440NA, 7440, 7440LL, 7440ST, 7440NA, 7441, 7443, 7443LL, 7443ST, 7444, 7444LL,7444NA, W21W, W21/5W, 7443-SCK, 7443-SRCK, etc
- Application: Used for upgrading the T20 socket W21W 7440 7443 brake light lamp, this bulb is compatible both Standard and CK/SRCK Type,safe and easy installation.
- Warranty: Fully ONE YEAR guaranteed for the manufacturer defect.please check the owner manual or Amazon fitment note for brake stop light or tail light application before purchasing.NOT canbus free, extra load resistors maybe required to avoid the error code or signal hyper flash.
- ULTRA BRIGHT LIGHTS - Yorkim 3157 Red LED Bulbs are powered by 54smd 3014 and 4smd high performance 3030 chipsets to offer extremely brightness and give a refreshed look to your vehicle. Commonly used for 3056 3057 3156 3157 4157 LED Backup Reverse Lights Bulbs.
- SPECIFICATIONS - Head diameter 15mm, Length 48mm, Voltage 9-30v, Color: Brilliant Red, Lumen: 1600Lm/bulb. For more details, please refer to product picture #3. PLEASE VERIFY YOUR ORIGINAL LIGHT BULB DIMENSIONS/SOCKET TYPE BEFORE THE PURCHASE. A 50w Load resistor(Asin:B07KS6KMYG)might be needed to prevent hyper flash or error message when replace for Turn Signal Lights.
- FITMENT - 3056 3057 3057K 3057LL 3155 3157 3157K 3157NA 3157NAK 3157LL 3156NA 3156A 3156 3156K 3356 3357 3357K 3357KNA 3357LL 3457 3457-NA 3457K 3457NAK 3757AK 3757ALL 4057 4057LL 4057K 4114 4114LL 4114K 4157 4157LL 4157K 4157NA 4157NAK 5702A 5702AK 5702AK etc. Commonly used for Brake Lights, Backup Reverse Lights, Parking Lights, Turn Signal Lights and etc.
- HIGH QUALITY CHIPSETS - Yorkim 3157 backup reverse light bulbs are made with the latest technology and each LED is powered by 54 pcs 3014 SMD chipsets plus 4 pcs of 3030 SMD Chipsents, offering 4x brightness than OEM halogen bulbs. Replace your old bulbs and add style to your ride with a refreshed smart look. 360 Degree lighting ensures optimal visibility.
- EASY TO INSTALL - Non-Polarity design. Simply plug the bulb in and you are all set! No tool needed. Yorkim offers one year unlimited warranty to make your return or exchange hassle-free. Package includes:Package includes: Yorkim 3157 LED Bulbs Red Pack of 2.**NOTE** Yorkim is the only authorized seller for Yorkim products, please verify sellername before purchase to ensure getting high quality authentic Yorkim products.
- Package contain one pair PX chipsets led bulbs. Buy with confidence, We offer "ONE YEAR" warranty on item(s) that confirm to be manufacturer defect.
- Color:Brilliant Red.Size: 2.60" long and 0.75" in diameter. 21-pieces high power PX chipsets per bulb. It is perfect for customers who are looking for a Extremely bright output
- Lighting Output：2520 raw lumens, 1260 lumens for each bulb.Fits: 3156 3056 3356 3456 4156 3157 3047 3057 3357 3457 3757 4057 4111 4157 etc.
- The difference between running/tail (stage 1) and brake/signal (stage 2) light is great(the high intensity is about triple birhgter than the low intensity)
- Used for turn signal lights,brake lights,tail lights,etc
- TECHNOLOGY UPGRADED：Our LED tail light abandons the traditional straw hat lamp beads and adopts the latest Surface Mounted Devices technology which has greatly improved its durability and lifetime. You can get a new generation LED tail light with higher brightness, more accurate color temperature, firmer tamp beads and higher efficiency radiating. That extends its lifetime to more than 30,000 hours
- RED/WHITE COMBO BEAM: Red Beam: Brake Light, Running Light, Turn Signal Light Function; White Beam: Reversing /Back-Up Light Function. AMBOTHER's high brightness combo beam dramatically enhances the visibility of the car at night even in inclement weather which greatly reduces the chance of accident and rear-end collisions and than protects your driving safety
- WATERPROOF & COLD RESISTANT:Our tail light adds waterproof silicone inside the product to enhance the tightness of the lamp body, which makes it totally meets the international IP65 standard. What's more, AMBOTHER LED tail lights are built for inclement weather, such as stormy weather, even -40 °F weather
- DOT/SAE STANDARDS COMPLIANT :They are 100% compliant with DOT FMVSS108 and SAE standards. This ensures that it meets the federal government's requirements for visibility, durability, and reliability. In addition, to use DOT and SAE compliant lights will reduce property damage or the risk of personal injury liability when in the event of a traffic accident
- WIDELY APPLICABILITY: It's universal for most of the DC 12V vehicles such as Jeep, trailers, trucks, SUV, RV, Caravan, Vans, Cargo, Towing Vehicle etc. More accurately, it's suitable for Jeep TJ, YJ, JK, CJ, CJ-7, CJ-5 ( NOT factory Jeep light ) Our products have one-year warranty. If there are anything wrong with product, please contact us first
- (Set of 2) LED Chips: 39 pieces high quality,high power with high performance 2835 led chips per 3156 / 3157 red led bulb ---360 degree full angle illumination with projector lens design
- Each 3156 3157 LED red bulb was tested before shipping; Dual filament, big difference between high & low intensity light output, perfect and best value for replacing rear turn signal blinker light, brake stop tail light, center high mount stop ( 3rd brake ) light, side marker light,etc.
- Color: Brilliant pure red. Compatible with both standard type and CK / SRCK type. Voltage: 12V - 24V, built in stable current IC driver for longer lifespan.
- The length is about 2.09 inch. Cross reference number: 3056, 3156, T25, 3047, 3047LL, 3047K, 3057, 3057ST, 3057K, 3057KX, 3057X, 3057KLCP, 3057LL, 3155, 3155LL, 3157,3157K,3157X, 3157LL, 3157ST, 3157KX, 3357, 3357LL, 3357K, 3457, 3457K, 4057, 4057LL, 4057K, 4114, 4114LL, 4114K, 4157, 4157LL, 4157K, 3157-CK, 3157-SRCK, 3157-SCK,etc.
- NOT CAN-BUS error free, for some vehicles, it may require to install the load resistor to avoid the turn signal fast blinking or error code on the dashboard. Warranty: fully ONE YEAR guaranteed for the manufacturer defect. ;please check the fitment note application before purchasing. One Year Warranty
- (Set of 2 Bulbs)54SMD 3014 & 3SMD 3030 high Brightness chips per bulb,Working Voltage:9v-30v
- Fits:1157 BAY15D 1016 1034 1157 1157A 2057 2057A 2357 2357A 2357NA 2397 3496 7528 p21/5w etc.Easy installation, plug and play.
- Application:Flashing Strobe Blinking brake LED light bulbs will strobe at the beginning braking mode for much easier notified and safer stop & then turn stable solid brake light (Legal blinking times) to avoid any automotive cars, trucks, SUVs, RVs rear-end collision.
- Advantage:Non-polarity design, 300% brighter than original halogen bulb,full Aluminum Housing with Projection lens for Maximum Light output, aircraft grade aluminum heat sink with Low temperature,built in Constant Current IC for Longer life span & Low Power Consumption.
- Note:iBrightstar LED are strictly tested for sale!!! We offer fully " ONE YEAR " guaranteed for manufacturer defect.
- Partsam (2xRed) 6 inch Oval 6 LED 4 screws _Stop/Turn/Tail Light.
- Application: Trucks, trailers, tractors, semi-trailer, boat trailer, horse trailer, travel trailer, dump Truck, special vehicle, etc.
- Convert your old incandescent lights to more modern LEDs; LEDs are brighter and light faster, draw less current and generate less heat than incandescents.
- Outside surface mount measures: 191mm x 85mm x 24mm (7.52" x 3.35" x 0.94"), Actual light measures: 164mm x 56mm x 11mm (6.45" x 2.2" x 0.43")
- EASY TO INSTALL: White Wire - Ground; Red Wire - high brightness; Black Wire - low brightness. This Tail Light is Hardwired and Surface Mount, not Plug and Play
- (Set of 2) 7443 Strobe led brake light bulbs will strobe at the beginning braking mode for much easier notified and safer stop & then turn stable solid brake light (Legal blinking times) to avoid any automotive cars, trucks, SUVs, RVs rear-end collision.
- LED Chips: 39 pieces high quality,high power with high performance 2835 led chips per 7440/7443 strobe brake led bulb ---360 degree full angle illumination with projector lens design
- T20 7443 dual filament, big difference between high and low intensity light output, replacing rear 7440 7443 brake stop light, center high mount stop ( 3rd brake ) light,etc.Extra load resistors maybe required to avoid the error code or blinking issue.
- The length is about 2.09inch. Cross reference number: 992, 7440, 7440LL, 7440ST, 7441, 7443, 7443LL, 7443ST, 7444, W21W,etc
- One Year Warranty,Color: Brilliant pure red. Compatible with both standard type and CK/SRCK type. Voltage: 12V - 24V, built in stable current IC driver for longer lifespan.
- (Set of 2) 1400 lumens per T25 3156 3157 LED Bulb, total 2600 lumens for both LED 3157 bulbs;Each 3157 3057 LED turn signal brake stop light bulb is equipped with high illumination and high power 33 pieces 5730 LED chips.
- Built-in Intelligent IC driver and 6063 aviation aluminum material for best cooling and longer lifespan.
- Working Power: 8.5W, Volts: 12V ~ 24V; Waterproof IP67; Color: Pure Red ; Application: Used for upgrading turn signal blinker light, brake stop tail lights, side marker light,etc.
- T25 base, Cross reference number: 3156, 3157, 3057, 3056, 3047, 3155, 3357, 3457, 3757, 4057, 4114, 4157, 5702, P27/7W, etc.
- One year warranty. Please check the owner manual or the stock lamp to confirm the cross reference number before purchasing. Amazon fitment is only for reference, not 100% guaranteed accuracy.
Last update on 2019-05-18 / Affiliate links / Images from Amazon Product Advertising API
Last update on 2019-05-18 / Affiliate links / Images from Amazon Product Advertising API