NHTSA Campaign Number: 18V612
Manufacturer Ford
Motor Company
Components LATCHES/LOCKS/LINKAGES
Potential Number of Units Affected 503
Incorrect Length of Door Striker Bolts/FMVSS 206
If the doors open in the event of a crash, there is an increased risk of injury.
Summary
Ford Motor Company (Ford) is recalling certain 2018 Ford Edge and Lincoln MKX vehicles. These vehicles may have door striker bolts that are shorter than intended. Vehicles with shorter door striker bolts fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 206, “Door Locks and Door Retention Components” potentially resulting in the doors opening in the event of a crash.
Remedy
Ford will notify owners, and dealers will replace the door striker bolts, free of charge. The recall is expected to begin October 15, 2018. Owners may contact Ford customer service at 1-866-436-7332. Ford’s number for this recall is 18C06.
Notes
Owners may also contact the National Highway Traffic Safety Administration Vehicle Safety Hotline at 1-888-327-4236 (TTY 1-800-424-9153), or go to www.safercar.gov.
Check if your Vehicle has a Recall
September 12, 2018
TO: All U.S. Ford and Lincoln Dealers
SUBJECT: NEW VEHICLE DEMONSTRATION / DELIVERY HOLD – ADVANCE NOTICE
Compliance Recall 18C06
Certain 2018 Model Year Edge and MKX Vehicles
Incorrect Door Striker Bolts
AFFECTED VEHICLES
| Vehicle | Model Year | Assembly Plant | Build Dates |
| Edge | 2018 | Oakville | July 27, 2018 through July 31, 2018 |
| MKX | 2018 | Oakville | July 27, 2018 through July 31, 2018 |
Affected vehicles are identified in OASIS and FSA VIN Lists.
REASON FOR THIS COMPLIANCE RECALL
Some of the affected vehicles may have an incorrect shorter length door striker bolt installed, and may not conform to the requirements specified by Federal Motor Vehicle Safety Standard (FMVSS) 206: Door Locks and Door Retention Components. Reduced door striker strength may allow a door to open in a crash, increasing the risk of injury.
SERVICE ACTION
DO NOT DEMONSTRATE OR DELIVER any new in-stock vehicles involved in this compliance recall. A complete Dealer Bulletin will be provided to dealers by early 4th Quarter, 2018 when it is anticipated that parts ordering information and repair instructions will be available to support this compliance recall.
IMPORTANT: Dealers should open a Repair Order (RO) only when a full dealer bulletin is published. Opening an RO against an Awareness or Advance Notice will result in warranty rejections against a recall.
CUSTOMER NOTIFICATION
Owners of record will be notified via first-class mail after repair instructions and parts ordering information have been provided to dealers.
PLEASE NOTE:
Federal law requires dealers to complete this recall service before a new vehicle is delivered to the buyer or lessee. Violation of this requirement by a dealer could result in a civil penalty of up to $21,000 per vehicle. Correct all vehicles in your new vehicle inventory prior to delivery.
QUESTIONS & ASSISTANCE
For questions and assistance, contact the Special Service Support Center (SSSC) via the SSSC Web Contact Site. The SSSC Web Contact Site can be accessed through the Professional Technician Society (PTS) website using the SSSC link listed at the bottom of the OASIS VIN report screen or listed under the SSSC tab.
Sincerely,
David J. Johnson
ADVANCE NOTICE Compliance Recall 18C06
September 12, 2018
Ford Media Center – FORD ISSUES SAFETY RECALL IN NORTH AMERICA FOR SELECT 2018 FORD EDGE AND LINCOLN MKX VEHICLES FOR DOOR STRIKER BOLTS
Sept. 13, 2018
Recall Acknowledgement
September 18, 2018
- Durable Ratchet Head: Made from Hardened treated Chrome Vanadium steel alloy (Cr-V) Corrosion-Retardant: Satin Finish. Made in Taiwan
- Easy Storage: A sturdy plastic storage case is included. Non-Slip Grip: Knurled handle
- Easy to Read: High Contrast & Dual Range Scale. Accurate: Pre-Calibrated to ± 4%
- Accessories included: 1/2" Drive 5" long Extension Bar
- Simple and Reliable: “Click” sound tells the preset torque value is reached. Stop applying force when you hear and feel it.
- PRECISE & HIGH QUALITY - Manufactured in Taiwan, our torque wrench is engineered for superior precision. It ships pre-calibrated to +/- 4% accuracy, ensuring dependable results every time. Includes a calibration certificate with a trackable serial number for your assurance.
- DURABLE - Built to last, featuring a reinforced ratchet gear head made from hardened, heat-treated Chrome Vanadium alloy steel for maximum strength and durability.
- LONGEVITY - Protect your investment with our proprietary Electro-Black finish, providing advanced rust and corrosion resistance for extended tool life.
- PERFORMANCE - Easily read and set torque levels with our patent-pending dual-range scale. The high-contrast, yellow-on-black markings are designed for easy visibility, even in low-light conditions.
- OMFORT - Equipped with a reversible ratchet head that drives in both directions and measures torque in a clockwise direction. The ergonomic, knurled handle ensures a non-slip, comfortable grip, reducing hand fatigue.
- [𝐇𝐢𝐠𝐡 𝐀𝐜𝐜𝐮𝐫𝐚𝐜𝐲 & 𝐃𝐮𝐚𝐥 𝐒𝐜𝐚𝐥𝐞] The SUZUME Torque Wrench is a top pick for mechanics, engineers, and DIY enthusiasts alike! With a dual-scale range of (10-170 Ft. Lb/ 14-231 N.m), it's versatile for various tasks. Each 1/2 torque wrench undergoes 10,000 accuracy tests with a ±3% margin, meeting industry standards. Plus, it stays accurate through 10,000+ times without recalibration. Trust SUZUME for quality and peace of mind in every use!
- [𝐌𝐮𝐥𝐭𝐢-𝐬𝐜𝐞𝐧𝐚𝐫𝐢𝐨 𝐔𝐬𝐞] The SUZUME torque wrench 1/2 drive is a versatile tool for truck, car, boat, motorcycle repairs, and home maintenance. It's your go-to solution for any task. Let it be your reliable companion at work, taking the worry out of precision and handling all challenges effortlessly.
- [𝟕𝟐-𝐓𝐨𝐨𝐭𝐡 𝐑𝐚𝐭𝐜𝐡𝐞𝐭 𝐇𝐞𝐚𝐝] The SUZUME 1/2 torque wrench is built for tight spaces with its 72-tooth reversible ratchet head. With just a 5° swing angle, operating it clockwise or counterclockwise is smooth sailing. Adjusting the torque is a breeze—simply pull down the locking knob to set your desired torque and release to lock it in. Thanks to the push-button sleeve replacement feature, assembly is a breeze. Say goodbye to assembly headaches and opt for our torque wrench' for effortless and efficient use!
- [𝐇𝐢𝐠𝐡-𝐪𝐮𝐚𝐥𝐢𝐭𝐲 𝐌𝐚𝐭𝐞𝐫𝐢𝐚𝐥𝐬 𝐟𝐨𝐫 𝐃𝐮𝐫𝐚𝐛𝐢𝐥𝐢𝐭𝐲] The SUZUME torque wrench is made from top-quality hardened chrome vanadium alloy steel (Cr-V), ensuring top-notch performance. Rigorous quality checks guarantee reliability. The electrophoresis-treated surface enhances wear resistance. Laser etched double scales on the 1/2 inch torque wrench ensure clear visibility even in bright sunlight. The ergonomically designed aluminum alloy handle provides a comfortable grip, reducing slippage and making force application easy. Whether you're a professional or a DIY enthusiast, our product ensures a comfortable user experience.
- [𝐋𝐨𝐮𝐝 𝐂𝐥𝐢𝐜𝐤 𝐒𝐨𝐮𝐧𝐝] Enhanced 1/2 drive torque wrench make your work safer and more efficient! Unlike previous models, these upgraded torque wrenches emit a distinct vibration and audible "click" when reaching the desired torque value, ensuring precise tightening without risking damage to mechanical parts. Now, you can feel the torque with ease and work confidently!
- PRECISION-CALIBRATED FOR ACCURACY & RELIABILITY: Experience unparalleled accuracy with a torque wrench certified to ±3% (clockwise). Each tool is meticulously calibrated and tested against rigorous standards to ensure consistent, repeatable performance. Prevent under-torquing (which can lead to loosening) and over-torquing (which can cause damage and failure), protecting your valuable equipment and projects.
- DURABLE & LONG-LASTING CHROME VANALIUM CONSTRUCTION: Built to withstand the demands of a professional garage, the torque wrench is forged from premium Chrome Vanadium steel (Cr-V) for exceptional strength and wear resistance. The polished chrome finish provides superior corrosion resistance, fighting off rust and ensuring smooth operation and a long service life, even in harsh environments.
- AUDIBLE “CLICK” & HAPTIC FEEDBACK FOR EASY USE: Know instantly when you've reached the desired torque setting. The torque wrench emits a loud, clear "CLICK" sound and provides a distinct vibration in the handle you can feel, even while wearing gloves. This dual-signal system allows for precise operation without the need to constantly watch the scale, reducing user error and fatigue.
- REVERSIBLE RATCHET HEAD & DUAL TORQUE SCALES: The 72-tooth reversible ratchet head offers a slim profile for access to tight spaces and a convenient directional switch for quick tightening or loosening. Features dual torque scales (Ft-Lb and Nm) to work seamlessly with a wide range of imperial and metric specifications without needing complex conversions.
- USER-CENTRIC DESIGN & COMPLETE PACKAGE: Designed for comfort and storage, the knurled handle ensures a secure, non-slip grip. After use, simply adjust the scale down to the lowest setting to maintain calibration. The set includes a durable protective storage case, keeping your torque wrench organized, safe from damage, and ready for your next job.
- 【9-in-1 Torque Solution】Complete set includes 1/4", 3/8", and 1/2" drive click torque wrenches plus 6 essential adapters (extension bars, universal joint, drive adapters) securely stored in a sturdy portable case.
- 【High Precision & Dual Scales】Factory-calibrated to ±3% accuracy with included certificate; features dual-range scales (1/4": 10-220 in.lb, 3/8": 5-45 ft.lb, 1/2": 10-170 ft.lb) for versatile application coverage.
- 【Clear & Safe Audible Click】Upgraded loud "Click" sound provides a distinct, reliable signal (strong over 5 N.m, subtle under) when preset torque is reached, preventing overtightening and ensuring safety.
- 【Smooth 72-Tooth Ratchet & Quick Release】Reversible 72-tooth ratchet head offers a low 5° arc swing for use in tight spaces and smooth operation in both directions. Quick-release button ensures secure socket changes.
- 【Durable Construction & Wide Use】Hardened Cr-V steel ratchet heads and phosphated adapters resist wear; aerospace aluminum handles ensure lightweight strength and corrosion resistance. Ideal for precise torque on bikes, motorcycles, cars, trucks, wheels, and industrial applications. Backed by 24-month support.
Last update on 2026-05-31 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.