| “This site contains affiliate links for which OEMDTC may be compensated” |
2017-2018 Edge/MKX – 3.5L/3.7L – Illuminated Malfunction Indicator Lamp (MIL) -Diagnostic Trouble Code (DTC) P013C
Some 2017-2018 Edge vehicles with 3.5L engines and MKX vehicles with 3.7L engines may exhibit an illuminated MIL with DTC P013C in the powertrain control module (PCM).
This may be due to an exhaust system leak.
Exhaust leak inspection should be conducted before performing Powertrain Control/Emissions Diagnostics PC/ED Manual diagnostic routines.
Inspect for carbon soot/moisture witness marks at all exhaust connections and catalyst monitor sensor (CMS) threads.
Refer to Workshop Manual (WSM), Section 303-14C.
Inspect CMS crush washer to confirm sensor is fully seated in the exhaust pipe.
Apply soapy water to exhaust connections including CMS threads, while exhaust flow is restricted at the tailpipe and exhaust system is pressurized at 5 PSI (do not exceed 5 PSI), will increase ability to identify and confirm leaks.
| MAKE | MODEL | YEAR |
| FORD | EDGE | 2017-2018 |
| LINCOLN | MKX | 2017-2018 |
SSM 47339
https://www.nhtsa.gov/recalls?nhtsaId=10143083
https://static.nhtsa.gov/odi/tsbs/2018/MC-10143083-9999.pdf
Loading...
Reload document 
Open in new tab
Bestseller No. 1
Smoke Machine Automotive Leak Detector,Evap Vacuum Smoke Diagnostic Tester,Pipeline Fuel Leakage Detector Compatible with 12V Vehicles
- 【Why Need It】For example: 1. The rupture of the vacuum hose will cause the mixture to be too thick, the idle speed will increase, the hot car will not start well, the engine will surge during acceleration, the fuel consumption will increase significantly, and the exhaust pipe will emit black smoke. 2. Blocking will cause the idle speed to drift, and the idle speed is easy to stall. 3. Air leakage in the vacuum tube will cause the engine to run weakly
- 【No Air Pump】Connect shop air supply, connect 12V vehicle power, introduce shop air to the AUTOOL SDT103 fuel leak tester, turn the Flow Dial anti-clockwise to open the air flow, switch on the power at the back of the unit, then AUTOOL SDT103 smoke machine automotive will start to generate smoke.
- 【External Flow Meter】You can easily control the air pressure, because the air pressure of each pipe in the car is different. If the air pressure is too high, the pipe will be damaged, and if the air pressure is too low, the leak will not be detected. Therefore, the flow meter is very important to protect your detection system more effectively. Make testing safer
- 【EVAP Detection】American cars that began production in 1996 are equipped with EVAP service ports; in most American cars, the EVAP service port is usually located in the engine compartment, but the EVAP service port of some special models may be located in other locations. Open the plastic cover of the EVAP service port, then use the spool wrench to remove the check valve clockwise, then install the EVAP service port adapter, and introduce smoke from the port into the EVAP leak detection system.
- 【Wide Testing Range】The smoke leak detector can do smoke testing of multiple systems, such as EVAP systems, Intake Systems, Cooling / EGR /Exhaust Systems, Crankcase Systems, Engine Airtightness, Vacuum Leaks, Low Pressure Turbo leaks.Applicable cars, motorcycles, snowmobiles, off-road vehicles, ATVs, light trucks and speedboats boats.
SaleBestseller No. 2
PowerScale M2 Automotive Smoke Machine Built-in Air Pump, 19-23 PSI Leak Detection, 2024 Professional Tools, EVAP System, Fuel Leakage, Leakage Diagnostic Tester for All DC12V Vehicles
- 🎉【Limited Time Opport】Grab your Powerscale M2 Smoke Machine Leak Detector now! Seize this opportunity to get more for your money, including lifelong technical support, a comprehensive 3-year warranty, and a hassle-free 30-day return and exchange policy. Our customer service team is ready to assist you 24/7, ensuring a smooth experience.Whether it's about model details, features, user guides, or after-sales care, we're here to help. Shop with confidence & enjoy peace of mind with every purchase!
- 🚗【Comprehensive Leak Detection】The Powerscale M2 Automotive Smoke Machine can easily inspect various vehicles, including older models, for leaks in throttle shafts, engine blocks, turbo test systems, crankcase systems, intake systems, exhaust systems, fuel tank systems, EVAP systems, EGR systems, cooling systems, and various pipe fittings.
- 🔥【High Performance and Premium Build】The Powerscale M2 does not require an external air source, equipped with a built-in air pump and pressure gauge. Its compressor can generate air pressure from 19 to 23 psi, allowing smoke to be easily introduced into the system being tested, speeding up the leak detection process.
- 🍃【Safe for Your Vehicle】Powerscale M2 heats baby oil or mineral oil to produce non-toxic smoke, ensuring no harm to the human body. It features a smart protector that automatically powers off in extreme temperatures to ensure the safety of both the operator and the equipment.
- 💰【Accurate Pressure Gauge】 Equipped with a pressure gauge the Powerscale M2 allows you to observe pressure changes and easily locate minor leaks. With a built-in air pump and smoke generator, it is an ideal choice for vehicle maintenance without relying on additional air pumps.
SaleBestseller No. 3
ANCEL S3000 PRO Automotive Smoke Machine with Built-in Air Pump and Pressure Gauge. Professional Vehicle Leak Diagnostic Detector Tools Kit for Leaks Test in Vacuum,Fuel,EVAP and Other Cars System
- 🕵【DETECT EVERY TYPE OF LEAK】Our versatile smoke machine for cars includes multiple vehicle cone adapters, a smoke delivery hose, intake bladder, and full-size automotive cap plugs. It seamlessly fits various lines and hoses, ideal for hassle-free checks on vacuum, fuel, engine, intake system and more
- 🧰【USER-FRIENDLY AUTOMOTIVE SMOKE MACHINE】Begin your detection with just 4 simple steps using our automotive smoke tester. It's lightweight, portable, and even includes a built-in air pump for on-the-go jobs. Detect leaks effortlessly and elevate your automotive expertise. Don't miss out - revolutionize your auto experience and order this automotive tool today!
- 🛡【VEHICLE-SAFE AUTOMOTIVE SMOKE TESTER】This smoke tester for vacuum leaks is made of thick solid metal, compact, and durable. It features an intelligent protector; if the operating temperature surpasses the limit, it will automatically power off to ensure the safety of both the operator and the smoke machine. This device uses baby oil to produce harmless smoke, perfect for all vehicle leak detection.
- 💰【SAVE TIME AND MONEY WITH BUILT-IN AIR PUMP】Experience effortless leak detection with our car smoke machine's integrated air pump. No need for external air connections– making it easier to move around and test anywhere. Say goodbye to external air pump maintenance costs. Its all-in-one design ensures high effectiveness across various auto systems. Choose this convenient, cost savings, and versatile auto smoke machine leak detector.
- 🚀【ACCURATE LEAK DETECTION and PRESSURE DECAY TEST】with built-in adjustable flow meter and pressure gauge, our smoke tester for vacuum leaks can quickly and accurately detect even the smallest leaks, ensuring precise diagnoses every time. It also supports pressure decay test, identifying tiny leaks by applying specific pressure and monitoring the gauge, especially useful for hard-to-spot leaks.
SaleBestseller No. 4
PowerScale M3 Automotive Smoke Machine Built-in Air Pump, 19-23 PSI Leak Detection, 2024 Professional Tools, EVAP System, Fuel Leakage, Leakage Diagnostic Tester for All DC12V Vehicles
- 🎉【Limited Time Opportunity】Get the PowerScale M3 Smoke Machine Leak Detector ! Act now to take advantage of additional value, including a comprehensive three-year warranty and lifetime technical support, enhancing your purchasing experience with added peace of mind!
- 🕵【Comprehensive Leak Detection】The PowerScale M3 Automotive Smoke Machine can easily inspect various vehicles, including older models, for leaks in throttle shafts, engine blocks, turbo test systems, crankcase systems, intake systems, exhaust systems, fuel tank systems, EVAP systems, EGR systems, cooling systems, and various pipe fittings.
- 🧰【High Performance and Premium Build】The PowerScale M3 does not require an external air source, equipped with a built-in air pump, pressure gauge, and adjustable flow meter. Its compressor can generate air pressure from 19 to 23 psi, allowing smoke to be easily introduced into the system being tested, speeding up the leak detection process.
- 🛡【Safe for Your Vehicle】PowerScale M3 heats baby oil or mineral oil to produce non-toxic smoke, ensuring no harm to the human body. It features a smart protector that automatically powers off in extreme temperatures to ensure the safety of both the operator and the equipment.
- 💰【Precise Flow Control】 Equipped with a pressure gauge and adjustable flow meter, the PowerScale M3 allows you to observe pressure changes and easily locate minor leaks. With a built-in air pump and smoke generator, it is an ideal choice for vehicle maintenance without relying on additional air pumps.
SaleBestseller No. 5
FOXWELL ST201 Enhanced Automotive Smoke Machine Leak Detector Built-in Air Pump, 12-18 PSI High Pressure Diagnostic Tester Perfect for 12VDC Vacuum EVAP Fuel and More Car Systems con Universal Adapter
- [Addressing Your Leakage Issues] Your vehicle's system or pipelines might be experiencing a leak? Are warning lights such as ECT OP BRAKE AC turning on? Are the diagnostic trouble codes in your vehicle being identified as P0442 P0455 P0422 P0456, etc.? In that case, the Foxwell ST201 smoke tester automotive is undoubtedly what you need!
- [Flexible 2-in-1 Design] Offering exceptional flexibility and portability. Free from the need for external cumbersome air pumps, this smoke machine automotive allows you to work effortlessly in garages, yards, parking lots, or outdoor work areas. No need to be restricted by location, you can test anywhere.
- [Scientific Pressure Output] Operating within a 0.8-1.2 bar output pressure range, accurately simulating real-time vehicle conditions. The Foxwell ST201 car smoke machine perfectly match with intake, exhaust, and vacuum systems, etc., Reduceing the risk of system damage or unreliable results due to excessively high or low pressure.
- [Exclusive Operating Technology] Adopting the only variable frequency operation technology on the market, ensuring controlled temperatures for enhanced safety and prolonged smoke tester lifespan. With a 10-minute work cycle, restart effortlessly with a single button for continued testing without interruptions.
- [Hassle-Free Service] P-urchase the ST201 smoke leak detector automotive with confidence! Benefit from 24/7 customer service, product warranties, and expert technical guidance. We're committed to your satisfaction, ensuring the best user experience. Buy now for worry-free automotive diagnostics!
SaleBestseller No. 6
Solary Automotive Smoke Machine Leak Detector - 12V DC EVAP Vacuum Diagnostic Tester for Pipe System
- 【Multifunction】Our automotive smoke machine can perform various tests such as: EVAP system test, car sealing test, fuel tank system test, exhaust system test, intake system test and various pipe fittings test, ect. It Could be used on all cars, motorcycles, snowmobiles, ATV, light trucks, boats, etc.
- 【Working Principle】 The automotive leak detector tool will change special oil(baby oil or mineral oil) into smoke, then blow smoke into sealed pipe system, you will find leak points in the pipe via the smoke. Please repair the part where leakage exists.
- 【Easy to Use】The automotive smoke tester comes with a hook allows you to hang it on your hood latch. Just add 20ml of baby oil or mineral oil, then connect the detector with the DC12V battery, it can output thick smoke within 20s after turning on, thick smoke output detects even the smallest leaks.
- 【Smart Protection】This smoke tester has overheat & freeze protection, the maximum temperature limit is 90°C, ture on antifreeze protection at a low temperature of -20°C. If it exceeds the working limit, such as over 90 ℃, it will automatically turn off the power to secure the safety of both the operator and device.
- 【Lightweight and Portable】Most car smoke machine are bulky and heavy, which is not conducive to the transportation and storage of the equipment, and is only suitable for repair shops. Solary automotive smoke tester weighs only 3kg, to be small and light, not only for easy storage, but also for ease of use. It is an indispensable tool for all car owner.
SaleBestseller No. 7
Automotive Smoke Machine Leak Tester for EVAP with Built-in Air Motor and Pressure Gauge – Model 03 - Exhaust Smoke Detector Tools Kit - Car Smoke Machine with Flow Meter and Smoke Fluid
- Built in Air Pump - All you'll need is to use your vehicle's 12V Battery
- Approved Smoke Fluid - Included.
- Modes - Air mode to verify leaks even before introducing smoke. Smoke mode to introduce smoke into vehicle system for leak detection.
- 2 Gauges - Pressure gauge to monitor total system pressure. Flow gauge to monitor leak size.
- Adjustable Flow - With a precise knob for when you want slower, thicker smoke.
SaleBestseller No. 8
Solary Smoke Machine for Car - DC 12V EVAP Automotive Smoke Tester for Vacuum Leaks
- [Automotive Smoke Machine SD302] Solary SD302 auto smoke machine is a professional machine for automotive pipe system leak detection, will help you find leaks and fix most general smoke leak problems. Supports various systems smoke testing, such as EVAP system, exhaust system, intake system, fuel tank system, engine airtightness, various pipe fittings and so on. Suitable for cars, motorcycles, trucks, off-road vehicles and speedboats boat, ect.
- [Dual Mode] The smoke leak detector has air mode and smoke mode, two modes can be controlled independently. Air mode help you test whether there is a leak in the pipe by injecting air into the pipe, smoke mode help you lacate the leak accuarately. It can output thick smoke within 20s after turning on, thick smoke output detects even the smallest leaks.
- [with Pressure Gauge] The smoke tester automotive has a pressure gauge, by observing the pressure gauge, you can determine whether the pipeline is leaking more quickly and accurately. Usually the pressure gauge value continues to rise, indicating that there is no problem with the pipeline. If the pressure gauge value continues to decrease, Explain that the pipeline leak needs to be repaired.
- [Built-in Air Pump] Solary SD302 smoke machine leak detector has its own air pump and smoke generator, no need to buy additional air machines. We use high-quality materials, after many tests, the smoke created from the machine is non-toxic, don't worry about damage to your body and vehicle, please rest assured to use.
- [ Overheating Protection] The car smoke machine has a smart protector to make it safe to use, if the system detects that the amount of e-liquid in the instrument is insufficient or the continuous working time is too long, the system is overheated, the overheat protection indicator ALARM light will light up, and the smoke will stop outputting until the temperature drops to the normal range, and the instrument will resume work, ensure operator and machine safety.
Bestseller No. 9
VXSCAN Automotive Smoke Machine Leak Detector,EVAP Smoke Machine for Cars with Built-in Air Pump and Pressure Gauge, Flow Meter, Dual Mode for All DC12V Vehicles in Vacuum,Fuel and Other Cars System
- 📍【EVAP SMOKE MACHINE LEAK TESTER】VXSCAN V3 smoke machine automotive can easily check car sealing, throttle shafts, engine block, turbo test system, crankcase system, intake system, exhaust system, fuel tank system, EVAP system, EGR system, cooling system, various pipe fittings leakage problems.
- 📍【BUILT-in AIR PUMP AND DOUBLE MODEL】V3 smoke machine not only has a built-in air pump, but also has a pressure gauge and an adjustable flow meter. The compressor generates air pressure is 0.8Bar/11.5Psi, allowing smoke to be easily introduced into the tested sealing system, speeding up the leak detection process.Two ways to quickly solve leaks - air mode helps you determine if there's a leak; smoke mode helps you locate leaks.
- 📍【EASY OPERATIOPN】1.Fill 10ml-20ml test johnson baby oil pink label (the most suitable oil) to the detector.2. Disconnect the intake pipe of the car. Connect the intake pipe of the car with the detector.3. Connect detector with DC12V battery, it starts to work.4.The pipe will be filled with smoke. Check the leak points. Note：The packaging does not contain oil but there is an oil delivery bottle.
- 📍【ADJUSTABLE AIR FLOW METER & PRESSURE GAUGE】You can easily control the air pressure, because if the air pressure is too high, the pipe will be damaged, and if the air pressure is too low, the leak will not be detected; You can observe the barometer to determine whether the car pipeline is leaking. If the barometer index keeps increasing, there is no problem with your car’s pipeline. On the contrary, your car’s pipeline leaks need to be repaired.
- 📍【WIDE COMPATIBILITY】Smoke machine automotive can produce plenty of smoke in 30 seconds, which can help you quickly, easily, and confidently pinpoint the location of a leak. The car smoke machine is used to detect leakage of pipe systems on automobiles, motorcycles, snowmobiles, ATVs, light trucks, and speedboats. It is suitable for all makes and models of cars.
Bestseller No. 10
Automotive Smoke Machine - EVAP Leak Detector with Built-in Air Compressor, EVAP Service Port Adapter, OEM Approved Smoke Fluid - Model 01 – EVAP Vacuum Exhaust Smoke Detector Tools Kit
- Automotive Smoke Machine for EVAP, Vacuum, Exhaust, and more leak testing diagnostics
- Built in 1-PSI Air Compressor - All you'll need is to use your vehicle's 12V Battery. 1-PSI is the industrial standard for automotive leak testing and is safe for EVAP systems which must be tested under 1 PSI to prevent damage.
- Approved Smoke Fluid - Included
- Warranty - 3 Years Full Coverage
Last update on 2024-04-20 / Affiliate links / Images from Amazon Product Advertising API
This product presentation was made with AAWP plugin.